• 전자공학회논문지S
• /
• 제34S권12호
• /
• pp.30-40
• /
• 1997

This paper presents a design method of fuzzy control systems by clustering the data in the subspace of the input-output produyct space. In the case of servo control, most input-outputdata are concentrated in thye steady-state region, and the the clustering will result in only steady-state fuzzy rules. To overcome this problem, we divide the input-output product space into some subspaces according to the state of input variables. The fuzzy control system designed by the subspace clustering showed good transient response and smaller steady-state error, which is comparable with the reference fuzzy system.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.492-495
• /
• 2003

Fuzzy Min-Max Neural Network(FMMNN) is a powerful classifier, It has, however, some problems. Learning result depends on the presentation order of input data and the training parameter that limits the size of hyperbox. The latter problem affects the result seriously. In this paper, the new approach to alleviate that without loss of on-line learning ability is proposed. The committee machine is used to achieve the multi-resolution FMMNN. Each expert is a FMMNN with fixed training parameter. The advantages of small and large training parameters are used at the same time. The parameters are selected by performance and independence measures. The Decision of each expert is guided by the gating network. Therefore the regional and parametric divide and conquer scheme are used. Simulation shows that the proposed method has better classification performance.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2005년도 춘계학술대회
• /
• pp.164-173
• /
• 2005

Data mining is the method to find useful information for large amounts of data in database. It is used to find hidden knowledge by massive data, unexpectedly pattern, relation to new rule. The methods of data mining are decision tree, association rules, clustering, neural network and so on. The decision tree approach is most useful in classification problems and to divide the search space into rectangular regions. Decision tree algorithms are used extensively for data mining in many domains such as retail target marketing, fraud detection, data reduction and variable screening, category merging, etc. We analyze waste database united with local information using decision tree techniques for environmental information. We can use these decision tree outputs for environmental preservation and improvement.

• 가정과삶의질연구
• /
• 제20권2호
• /
• pp.29-42
• /
• 2002

In this paper, we investigate the various opportunities of women informatization, which we believe to be major contributors for the high quality of life for women. We first justify various efforts for women informatization, which needs to be based on the analysis of the problems and the status quo. We have also examined the related government policies and programs as well as the programs of non-profit organizations for woman, and identified key problems areas. Integrating the results from this analysis, we have developed the vision and the framework for women informatization. We also give a list of strategic alternatives for improving quality of life through informatization, and promoting full-time housewives to become aggressive information users, information producers and information specialists. We use the expert Delphi method and fish-bone chart analysis to generate the priorities of specific tasks and target-based strategies for successful implementation of women informatization. We conclude this paper with various recommendations for empowering women to enjoy high-quality living through the process of informatization.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.687-692
• /
• 2002

This paper reviews the existing methods to divide the gear ratios of a multi-stage gear train, and proposes a simulated annealing-based algorithm to find the best gear ratios. The existing methods have their own limitations to be used in practical design, and are also problematic to be automated in a design system. However, the proposed algorithm is a general one which can be applied to gear trains having any number of stages, and offers a satisfactory result in a very short time. It is expected to be useful as a design sub-module of the design system for multi-stage gear drives.

• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.309-315
• /
• 2006

Important material properties of UCAS rod can divide by tension characteristic of base rod part and both end part of U type anchor. Tensile properties of base rod part need as concrete reinforcement material as an alternative material of reinforcing rod, and tensile properties of U type anchor is used at connection with UCAS rod. This treatise carry out tensile test of UCAS rod, examine necessary properties such as strength, elastic modulus and maximum capacity of UCAS rod as reinforcement material of concrete. Also, to examine material properties carry out tensile test of U type anchor.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제44권1호
• /
• pp.41-65
• /
• 2005

In this paper we make an experiment in order to test whether the teaching method with the Zone of Proximal Development (ZPD) developed by Vygotsky can be more effective and well applied in the middle school pratces. Based on this investigation, we conclude that ZPD help to efficiently enhance the study of students, in particular, the inferior student group. Moreover, if we divide the student by more precise stoups, the ZPD will be more effective on teaching and learning in middle school. Lastly, we arrive at the conclusion that a continuous teaching with ZPD will improve the student attitude positively in solving mathematical problem even it does not appeared apparently on this test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.374-375
• /
• 2011

This paper presents a method to determine parameters of BTB (back-to-back) converters in terms of the enhancement of interface flow margins. Interface flow margin is by definition a measure of how much active power can be transferred from the external areas to the study area with the fixed load demand, and it is mainly constrained by system voltage stability. BTB converters are controllable equipments with the active power flow through them, and its DC link in fact can divide the AC systems at the location and hence can reduce the fault current level. This paper first cals margin sensitivities at the nose point of F-V curves and formulates an optimization problem to update the BTB parameters to improve the margins. This procedure is repeated performed until the required margin enhancement is achieved.

• 산업공학
• /
• 제24권3호
• /
• pp.258-266
• /
• 2011

In this paper, we deal with a problem improving the productivity of a discrete production line for filling a printer cartridge with toner. We develop a new technology for controlling the weight of toner which must be filled in a cartridge and reform the current line based on our new control technology to result in more than 35% improvement of productivity as well as the control accuracy. In detail, first, we find a bottleneck process, the toner-filling process which gives the current production cycle times. Second, we divide the processing time of the bottleneck into several work elements and find the rotation time of an AC servomotor to be further reduced. Third, in order to reduce the rotation time, we develop a mathematical control-time model for determining the rotation time. Finally, we reform the current line partially as required by the change of the new control method.

• 한국멀티미디어학회논문지
• /
• 제20권12호
• /
• pp.2000-2008
• /
• 2017

The purpose of this study is to analyze the misconception flowchart of programming control structure and to suggest it as a method for improving computational thinking. In this study, we divide programming control structure concept into sequential, iteration, selection, and function, analyze what concept and principle are difficult for each learner, and what kind of misconception flowchart is drawn in the Introduction of C Programming course for beginners' programming learning. As an example, we show that a lesson learned from the process of correcting the misconception flowchart to the correct flowchart in the course.