• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.629-635
• /
• 1999

A second-order iterative learning control algorithm with feedback is proposed in this paper, in which a feedback term is added in the learning control scheme for the enhancement of convergence speed and robustness to disturbances or system parameter variations. The convergence proof of the proposed algorithm is givenl, and the sufficient condition for the convergence of the algorithm is provided. And it also includes the discussions about the convergence performance of the algorithm when the initial condition at the beginning of each iteration differs from the previous value of the initial. Simulation results show the validity and efficiency of the proposed algorithm.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.90-94
• /
• 2004

Among various modern control theories, PID control has been well used for several decades. PID algorithms needs son tuning methods are used for selecting PID parameters. But in some cases various kinds of performance indices are used instead of well-known tuning rules, and so variable type of performance index must be tested so that controllers, output characteristics and disturbance rejection property meets some specifications. In this paper, linear conbinational type of performance using error signal, time, control input and robustness is used to the PID control of air conditioning system. By the 2 DOF PID parmeters minimizing perfromacne index, controllers, output characteristics and robustness properties are analyzed. Simulations are done with MATLAB m file and mdl files.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.11
• /
• pp.888-895
• /
• 1989

A novel model reference adaptive control (MRAC) scheme for electrical servo drives is proposed, in which the control input is synthesized without any parameter identification mechanism and a PI controller is inserted ahead of the plant to reduce the steady state chattering. The proposed scheme is shown to be asymptotically stable in the case where the load torque disturbance satisfies a certan condition. An application to a permanent magnet synchronous motor drive shows that the output error between the plant and the reference model tends to zero and the chattering is greatly reduced.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.821-823
• /
• 2004

In this paper, a backstepping speed controller applied in SRM is presented. The driver of SRM is generally planned with a PI controller. A PI controller is becomes a satisfied structure in the system. it is used in position and speed control loops. However, when the system parameter uncertainties large inertia and load disturbance, it will not be able to expect a satisfied efficiency. Therefore, a backstepping control law was researched, which is able application even to a linear system as well as a nonlinear and it is more excellent than a origin adaptive control law. In this paper, a backstepping control law applied the drive system of SRM was used in the drive controller. The computer simulation result clearly show that the applied backstepping controller can track the speed reference signal generated by internal signals.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.4
• /
• pp.197-207
• /
• 2001

In this paper, design problem of QFT-PSS using Genetic Algorithm(GA) is investigated for power systems with parameter variation and disturbance uncertainties. A robust controller for uncertain power systems can be designed automatically such that the cost of feedback is minimized and all robust stability and performance specifications are satisfied. It is shown that the proposed design method not only automates loop shaping but also improves design quality and improves the quality with a reduced order controller. The robustness of the proposed controller has been investigated on a single machine infinite bus model. The results are shown that the proposed QFT-PSS using GA is more robust tan conventional PSS.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.972-979
• /
• 1999

QFT(Quantitative Feedback Theory) is a very practical design technique that emphasizes the use of feedback for achieving the desired system performance tolerances in despite of plant uncertainty and disturbance. The fundamental concept of QFT is a loop shaping procedure that a suitable controller can be found by shaping a nominal loop transfer function. The loop shaping synthesis involves the identification of a structure and the specialization of parameter optimization of a desired system. This paper presents an improved loop shaping approach of QFT with model validation using GA(Genetic Algorithm). The method presented in this paper removes the problems of iterative operation, transformation error, and model validation in the conventional methods without consideration of frequency domain.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.8
• /
• pp.883-892
• /
• 1992

In order to remove the assumption of full state availability which is one of the major difficulties with the practical realization of variable structure control system (VSCS), an output feedback variable structure control scheme for multivariable systems is proposed. The proposed output feedback VSCS is composed of a switching surfaces with dynamic structure and a new output feedback control input that can be constructed by using conventional output feedback control input design methodologies. With the proposed scheme, the practical realization of VSCS for the systems with unmeasurable states and for high order systems that conventional schemes cannot be applied is possible. Simulation results show that proposed scheme is a viable method to achieve the desired control performance, for example, good transient response, robustness against process parameter variations and external disturbance without measuring all the state variables.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.141-144
• /
• 2003

This paper proposes a design method of a CDBC(Continuous-time Deadbeat Controller)system that takes into account the response between the sampling instant and using second-order smoothing elements. The continuous deadbeat controller is composed of a serial integral compensator and a local feedback compensator introduced into the state feedback loop. A DC servo motor is chosen for implementing CDBC algorithm. Especially according to the variable input and disturbance, corresponding CDBC design method is suggested. A Matlab Simulink is used for simulation with the Motor parameter. By computer simulations, control inputs and system outputs are shown to have desirable property such as smoothness.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1323-1326
• /
• 1996

This paper describes an air conditioner control method using a fuzzy control theory. The fuzzy control method was implemented with Philips 80C552 one chip microcomputer and tested in an actual vehicle. Experiments showed that proposed control method is superior to the conventional PID control method especially in the environments with abrupt disturbance and parameter variation of the control system. Fuzzy-Based control method was proved to maintain a stable and improved temperature control in an abrupt environmental changes.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.974-976
• /
• 1996

In this paper, a reference model following control system using a fuzzy logic controller(FLC) is proposed By using an integrator and a nonlinear hysteresis element, a reference model whose response has no overshoot and fast rise time is designed. A FLC is designed to follow as close as possible to the response of the reference model. The proposed design method is shown that the robustness and the optimal tracking property can be achieved under modeling error, disturbance and parameter perturbations. The effectiveness of the proposed design method is verified through the simulation that compare using the FLC with using a $H_{\infty}$ controller.