• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.31-36
• /
• 2015

To describe turbulent wake behind a submarine, it is very important to know turbulent kinetic energy distributions in the wake. To get the distribution is to solve the turbulent kinetic energy equation, and to solve the equation, it is needed both information of ${\lambda}$ and ${\sigma}$ which define physical characteristics of the wake. This paper gives analytical solution of the equation, which is driven from $8^{th}$ order polynomial fitting, as a function of given ${\lambda}$, even though there is no information of ${\sigma}$. In comparison between numerical solution(i.e. exact solution) and analytical solution, the relative errors between them are less than to 5% in the range of 0 < ${\xi}$ < 0.95 in most given ${\lambda}$.

• Computational Structural Engineering
• /
• v.6 no.3
• /
• pp.89-97
• /
• 1993

General formulation to analyse the rectangular thin plate on a soil medium by energy method is developed. In the problem, Boussinesque's formular needs to be integrated after assuming the contact stress distribution. Two different functions, i.e., power series and Chebychev polynomials are used to approximate the contact stress distribution. It was found that Chebychev polynomials are better function to describe the contact stress than power series. Chebychev polynomials considering stress singularity around plate boundary is recommended as the desirable shape function for future research.

• Water for future
• /
• v.9 no.1
• /
• pp.101-105
• /
• 1976

This Study is developed in order to determine the probability of a raintall depth of short duration in Seoul as considering the profect life and the factor of safety of hydraulic structures. The raw annual maximum rainfall data are selected from 1915 to 1974 about short duration (10min-120min.) in Seoul. The selected data are treated by frequency analysis, and the hypothesis that the distribution fuction of the raw data is normal Distribution is performed by chi-square test that signifcance level has 5%. With the parameters (mean and standard deviation) of the accepted distribution function, the probabilitn of a rainfall depth can be easily determined on the graph which is made on this paper.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.4
• /
• pp.233-243
• /
• 1994

Constitutive relation of thermoelasto-plastic material undergoing phase transformation during quenching process were developed on the basic of continuum thermodynamics. The metallic structure, temperature and residual stresses distributions were numerically calculated by the finite element technique. The metallic structure were defined by transformation from austenite to pearlite and characterized as a fuction of thermal history and mixture rule of phase. On the distribution of thermal stress along the radial direction, axial and tangential stresses are compressive in the surface, and tential in the inner part. Radial stress is tensile in the whole body. The reversion of residual stress takes plase at 11.5~15.5mm from the center.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.03a
• /
• pp.161-168
• /
• 1997

The purpose of this study is to evaluate the possibility of normalization of the distibutions of soil parameters taken from soft ground and the reliability of the safety factors of specific objects on it, including sanitary landfill. Through this study it is found that distributions of soil parameters could be adjusted to appropriate normal distributions as possibility density functions(PDF), and that especially the group of initial cohesions and the coresponding safety factors has a perfect linear correlation. According to those results the PDF to initial cohesion as possibility parameter can not only be tmsformed to the PDF to safety factor but also, conseqently, the reliability of the safety factor(SF) simply based on the mean value of soil parameter(Co) can be calculated or easily picked up from the standrad normal distribution table. It is therefore concluded that even though calculated values of safety factors are over any standard requirements some possibility of risk both to the objects and natural soft ground could be still existing, and also a new standard value for this slope stability control system should be derived just by adjusting old one according to the magnitude of risk possibility.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.95-106
• /
• 2013

It is now generally known that dynamical climate modeling outputs include systematic biases in reproducing the properties of atmospheric variables such as, preciptation and temerature. There is thus, general consensus among the researchers about the need of bias-correction process prior to using climate model results especially for hydrologic applications. Among the number of bias-correction methods, distribution (e.g., cumulative distribution fuction, CDF) mapping based approach has been evaluated as one of the skillful techniques. This study investigates the uncertainty of using various CDF mapping-based methods for bias-correciton in assessing regional climate change Impacts. Two different dynamicailly-downscaled Global Circulation Model results (CCSM and GFDL under ARES4 A2 scenario) using Regional Spectial Model for retrospective peiod (1969-2000) and future period (2039-2069) were collected over the west central Florida. Total 12 possible methods (i.e., 3 for developing distribution by each of 4 for estimating biases in future projections) were examined and the variations among the results using different methods were evaluated in various ways. The results for daily temperature showed that while mean and standard deviation of Tmax and Tmin has relatively small variation among the bias-correction methods, monthly maximum values showed as significant variation (~2'C) as the mean differences between the retrospective simulations and future projections. The accuracy of raw preciptiation predictions was much worse than temerature and bias-corrected results appreared to be more significantly influenced by the methodologies. Furthermore the uncertainty of bias-correction was found to be relevant to the performance of climate model (i.e., CCSM results which showed relatively worse accuracy showed larger variation among the bias-correction methods). Concludingly bias-correction methodology is an important sourse of uncertainty among other processes that may be required for cliamte change impact assessment. This study underscores the need to carefully select a bias-correction method and that the approach for any given analysis should depend on the research question being asked.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.208-216
• /
• 2002

In this paper, the design method of a waveguide broad-wall longitudinal slot array monopulse antenna of X-type monopulse axes is presented, and the method is verified through manufacture and measurement. In the antenna design of this paper, the antenna size is small and the monopulse axes are X-type. Thus, the common continuous aperture distribution fuction is not suitable and the power balance among antenna quadrants should be considered. Also, since the waveguide height is reduced into 0.1 wavelength, the modelling of the slot characteristics is not simple. Thus, in this paper, the aperture distribution is optimized by using random number, and the balance among the quadrants is achieved by applying the quadrant weighting factor during the aperture optimization process. Also, the moment method procedure is accelerated by applying the interpolation technique to some part of the moment matrix, and the moment method procedure is added to the array synthesis program as a subroutine so that the slot characteristics can be calculated directly when it is required. Based on this method, a antenna of 28dBi is designed and manufactured. It is found that the antenna characteristics is similar to design data.

• Nuclear Engineering and Technology
• /
• v.5 no.4
• /
• pp.265-278
• /
• 1973

The incoherent neutron scattering cross section of molecular liquids is analyzed using a damping function model for correlation functions of molecular translations and rotations. The present approach is different from recent works in that the scattering function is evaluated directly, not through the intermediate scattering function. The damping fuction is determined from a simple relation between its long-wavelength limit and the generalized frequency distribution function, and translation-rotation couplings are assumed to be neglected. A physical model is used for the translational motions of center-of-mass of a molecule, including properly its short-time and long-time behaviors. A simple model for the rotational motions is suggested which relates the damping function to the Fourier transform of the dipole correlation function, or equivalently, the infrared vibrational absorption spectrum. Theoretical absolute scattering intensities are computed for liquid methane and shown to be in satisfactory agreement with both thermal and cold neutron measurements.

• Journal of the Korean Magnetics Society
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2002

Al$\^$3+/ substituted garnet Y$_3$Fe$\_$5-x/Al$\_$x/O$\_$12/ (x=0.0, 0.25, 0.5, 0.75, 1.0) was fabricated by sol-gel method. The crystallographic and magnetic properties of Y$_3$Fe$\_$5-x/Al$\_$x/O$\_$12/ have been studied with Mossbauer spectroscopy, x-ray diffraction (XRD), thermogravimetry analysis (TGA), differential thermal analysis (DTA), and vibrating samples magnetometer (VSM). The crystal structure of Y$_3$Fe$\_$5/O$\_$12/ is found to be a cubic with the lattice constant a$\_$0/= 12.381$\pm$0.005 $\AA$. The lattice constants a$\_$0/ decreases linearly from 12.381 to 12.304 A as the Al concentration (x) increases from x=0.0 to 1.0. Mossbauer spectra of measured at Y$_3$Fe$\_$5-x/A1$\_$x/O$\_$12/ various absorber temperatures of 13 to 600 K. Mossbauer spectrum for x = 0.0 is consist of well resolved two sets of six line patterns. While with increasing Al concentration outer sextet patters, which is originating from octahedral sites, broadens widely. These phenomena are interpreted in terms of random probability distributions of Fe$\^$3+/ and Al$\^$3+/ in tetrahedral site.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.489-502
• /
• 2012

Biogeochemical processes in groundwater-stream water mixing zone are recently of great interest because biodegradation and natural attenuation of aquatic contaminants may occur through the processes. The objectives of this study are to investigate the hydrologic and biogeochemical processes at the groundwater-stream water mixing zone through which surface water-driven nitrate may be naturally attenuated, and to examine the effect of the vertical flow exchange flux on biogeochemical processes using correlation analysis. To examine the direction of vertical water flow in the zone, vertical hydraulic gradients were measured at several depths using mini-piezometers. Microbial populations in soil samples of the zone were also analyzed by means of the polymerase chain reaction (PCR) and Cloning methods. In addition, partial correlations among vertical flow exchange, nitrate concentration and microbial activity was investigated to examine their mutual interaction. The results showed the significant interaction among the three parameters, resulting in natural attenuation of nitrate. This study showed an example of the biogeochemical fuction of groundwater-stream water mixing zone, which can be predictable from the examination of the interaction among microbial activities, concentration of contamination and vertical flow exchange flux. temperature show a significant difference in adjacent streambed, Also, the results shows that distribution of temperature was more affected by groundwater direction than intensity of flux.