• 한국환경보건학회지
• /
• 제28권5호
• /
• pp.59-64
• /
• 2002

The photocatalytic decolorization of the Rhodamine B (RhB) was studied using a UV/TiO$_2$ reactor. Yakuri titanium dioxide(anatase) was used as the suspended photocatalyst and proved to be effective for decolorization irradiated with UV light (254 mm). The photocatalyzed dioxide concentrations, light intensity and air flow rates. In 0.01 mM RhB, color could be completely photodegraded after 3 hours. Absorption spectrum of an aqueous solution containing RhB showed a continued diminution of the RhB concentration in the solution bulk : concomitantly, no new absorption peaks appeared. This confirmed the decolorization of RhB, i.e., the break up of the chromopore. The optimum loaded titanium dioxide for the decolorization was 0.75 g/(equation omitted). The light intensity showed exponential decay with distance. The decay of light intensity of RhB solution showed different tendency from TiO$_2$. These results suggested that the photocatalytic decolorization of dyes may be available method for decolorizing in wastewater.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.235-239
• /
• 1996

In recent years, the optical properties of multiple-scattering media like tissue have been studied for their potential applications in medicine. In this work the optical properties of multiple scattering media were investigated using the time-resolved reflectance measurement. The reflected light was measured by time-correlated single photon counting system. The transport scattering and absorption coefficient are related to the initial rapid decay and the subsequent decay in reflected light, respectively. Also the optical properties of the samples were measured by conventional method, ie., using continuous wave light. When the distance between the light source and the detector is over 8mm, the optical coefficient can be measured accurately using the suggested method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.447-450
• /
• 2005

Multi-channel artificial reverberation algorithm to control perceived direction and distance is described in this paper. In conventional algorithms using IIR filters, reverberation time is the only parameter to be controlled. Moreover, since the convolution-based conventional algorithms apply only same impulse responses, but not considering sound localization, it was not realistic enough. The new algorithm proposed in this paper utilizes early reflections segmented according to the azimuth from which direct sound comes and controls perceived direction by panning the direct sound, and controls perceived distance by adjusting Energy Decay Curve (EDC) of reverberation and gain of the direct sound. In addition, the algorithm enhances Listener Envelopment(LEV) to make late reverberation incoherent among channels.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.617-631
• /
• 2019

본 4단계 교통수요예측모형의 통행분포단계에서 중력모형이 가장 일반적으로 활용하고 있다. 본 연구는 중력모형변수(통행시간, 통행비용 등)의 가변적인 한계를 보완하기 위해 접근성 속성을 단일 마찰인자로서 표현할 수 있는 보다 현실적이고 장래 활용이 용이한 신규 마찰인자를 개발하는데 그 목적이 있다. 이에 신규 마찰인자 도출을 위해 도시공간구조의 특성을 정량화할 수 있는 공간구문론(space syntax)을 활용하여 Link 단위 통합도를 도출 후 통행시간, 통행거리 관계를 이용해 일종의 대리변수로서의 신규 마찰인자를 도출하였다. 대수전환을 통한 마찰인자별 정산결과, 기존 마찰인자(최단거리, 통행시간) 대비 유사하거나 더 높은 수준을 보이는 것으로 분석되었다. 다양한, 검증지표를 활용하여 기존 마찰인자와의 비교시, 전체적으로는 기존 마찰인자와 유사하지만, 단거리 구간 및 장거리 구간에서 설명력이 뛰어난 것으로 분석되었다. 따라서, 기존 최단거리의 한계에서 벗어나 접근성을 보완할 수 있는 통합도 지표를 이용하여 신규마찰인자 도출 및 적용이 가능하고, 장래 활용성에서 좀 더 장점을 갖는 것으로 판단된다.

• 지역연구
• /
• 제31권1호
• /
• pp.65-81
• /
• 2015

본 연구의 목적은 국민국내관광객을 대상으로 이동시간거리에 대한 관광수요탄력성을 분석하는 것이다. 분석자료는 국민여행실태조사의 여행기록부 원자료를 이용하였고, 이동시간거리별 관광 수요는 구분적 선형회귀모형(Piecewise Linear Regression)을 적용하여 분석하였다. 본 연구의 결과를 정리하면, 첫째, 우리나라 국민국내관광객의 이동시간거리 1분 증가할 때 관광수요는 비탄력적으로 0.005%만큼 감소하였다. 이를 시간거리에 따른 구간별로 보면, 동일 조건에서 관광수요는 출발지에서 1구간(11.6분 이내)은 0.206% 상승하였고, 2구간(11.7-75.1분)과 3구간(75.2분 이상)에서 각각 0.106%, 0.014% 감소하였다. 둘째, 관광객의 수요가 나타나지 않는 이동시간거리 75.2분 이상의 구간은 거리조락율이 급격히 상승하는 관광효과배제구역(Effective Tourism Exclusion Zone)으로 해석할 수 있다. 셋째, 관광행태별 관광수요는 동반여행보다 단독여행 할 경우 증가하였으며, 출발지 기준의 관광수요는 중소도시 및 읍면에 비하여 대도시에 거주할수록 높게 나타났다. 연령별 관광수요는 젊은 연령에서 증가하다 고연령으로 갈수록 감소하였다.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.71-74
• /
• 2002

The apparent barrier height for charge transfer through an interfacial water layer between a Pt/Ir tip and a gold surface has been measured using STM technique. The average thickness of the interfacial water layer inside an STM junction was controlled by the amount of moisture. A thin water layer on the surface was formed when relative humidity was in the range of 10 to 80%. In such a case, electron tunneling through the thin water layer became the majority of charge transfers. The value of the barrier height for the electron tunneling was determined to be 0.95 eV from the current vs. distance curve, which was independent of the tip-sample distance. On the other hand, the apparent barrier height for charge transfer showed a dependence on tip-sample distance in the bias range of 0.1-0.5 V at a relative humidity of approximately 96%. The non-exponentiality for current decay under these conditions has been explained in terms of electron tunneling and electrochemical processes. In addition, the plateau current was observed at a large tip-sample distance, which was caused by electrochemical processes and was dependent on the applied voltage.

• Coupled systems mechanics
• /
• 제7권4호
• /
• pp.407-420
• /
• 2018

In solid-liquid two phase flow, the knowledge of how descending solid particles affected by the presence of downstream wall is important. This work studies at what interstitial distance the velocity of a vertically descending sphere is affected by a downstream wall as a consequence of wall-modified hydrodynamic forces through a validated dynamic model. This interstitial distance-the hydrodynamic coupling distance ${\delta}_c-is$ found to decay monotonically with the approach Stokes number St which compares the particle inertia to viscous drag characterized by the quasi-steady Stokes' drag. The scaling relation ${\delta}_c-St-1$ decays monotonically as literature below the value of St equal to 10. However, the faster diminishing rate is found above the threshold value from St=10-40. Furthermore, an empirical relation of ${\delta}_c-St$ shows dependence on the drop height which clearly indicates the non-negligible effect of unsteady hydrodynamic force components, namely the added mass force and the history force. Finally, we attempt a fitting relation which embedded the particle acceleration effect in the dependence of fitting constants on the diameter-scaled drop height.

• 대한기계학회논문집B
• /
• 제20권4호
• /
• pp.1395-1405
• /
• 1996

The purpose of this experimental research is to investigate the local heat transfer characteristics in the upward free water jet impinged on a downward flat plate of uniform heat flux. The inner shape of rectangular nozzle used was sine curve type and its contraction ratio of inlet to outlet area was five. Experimental parameters considered were Reynolds number, nozzle exit-flat plate distance, and level of supplementary water. Local Nusselt number was influenced by Reynolds number, Prandtl number, supplementary water level, and distance between the nozzle exit and flat plate. Within the impingement region, the Nusselt number has a maximum value on the nozzle center axis and decreases monotonically outward from center. Outside of the impingement region, on the other hand, the Nusselt number has a secondary peak near the position where the distance from nozzle center reaches four times the nozzle width. However if nozzle exit velocity exceeds 6.2 m/s, the secondary peak appears also in the impingement region. The empirical equation for the stagnation heat transfer is a function of Prandtl, Reynolds, and axial distance from the nozzle exit. The optimum level of supplementary water to augment the heat transfer rate at stagnation point was found to be twice the nozzle width.

• 한국지반공학회지:지반
• /
• 제4권4호
• /
• pp.19-28
• /
• 1988

An underground explosion crests shock waves, which propagate to a buried structure through the이 ground. Due to the explosion, very high stresses and large deformation occur in the ground so that the shock waves decay gradually. In this study the numerical simulation of the ground shock attenuation has teen performed. One dimensional wave equation is presented and the finite difference method is applies. A Cap model is adopted to describe the stress-strain behavior of the ground. The results are expressed by the attenuation of the peak stress and the particle vrelocity by the time and the distance.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.77-83
• /
• 1995

An electrostatic reducer of a multi-pole high DC voltage applied type and a high frequency square wave voltage applied type have been studied to eliminate effectively and safely electrostatic charge on a dummy charged material. As a fundamental experiments, measurement were made on the decay time as a function of distance between electrostatic reducer and charged body, skewed angle of electrostatic reducer installed and wind speed of generated ions(＋ or －) by electrostatic reducer with high DC voltage and high frequency square wave voltage. Based oil the results above, a appropriate installation and method were produced as a trial for factory.