• Korea Trade Review
• /
• v.47 no.2
• /
• pp.31-46
• /
• 2022

The purpose of this study is to measure the degree of discrepancies in the bilateral trade data between South Korea and its five major trade partners and to identify the key factors causing the discrepancies. By analyzing statistics based on the CIF/FOB ratio estimation and taking into consideration the trade flow via Hong Kong, the study finds that the discrepancies in South Korea's trade data with the US, Vietnam, and Japan are insignificant. In case of Hong Kong, however, the value of South Korea's import from Hong Kong is extensively inconsistent with Hong Kong's export to South Korea(i.e. the mirror data) while the value of South Korea's export to Hong Kong generally corresponds to its mirror data. Such discrepancies are caused by differences in recording re-exports, which are often found in the trade flow via entrepôt economics including Hong Kong. Meanwhile, discrepancies in reported bilateral trade flows between South Korea and People's Republic of China(PRC) remain relatively marginal. The discrepancy of statistics between South Korea as the exporter and PRC as the importer is mainly caused by the trade flow via Hong Kong. On the other hand, the discrepancy of statistics between South Korea as the importer and PRC as the exporter is assumably due to the differences in attribution of trade partners.

• Korea Trade Review
• /
• v.47 no.4
• /
• pp.161-176
• /
• 2022

Most companies are achieving economic benefits by producing products in the form of bi-national products, but there are also negative consequences such as reduced brand power, so strategic bi-national product planning and branding is essential. In order to actively reflect these practical needs, this study conducted a comprehensive and easy-to-generalize evaluation of Bi-national products that has been somewhat underdeveloped in previous studies. To this end, the selection and evaluation criteria of the products to be investigated were differentiated. This is to classify the products by place of use and the purpose of use so that the majority of bi-national products can be included, and then use the combination to derive the specific products to be evaluated for bi-national products. The evaluation of the product identified the phenomenon of psychological conflict among consumers due to the country of origin discrepancy at the level of decreasing brand authenticity. The above research design is an evaluation method that can encompass bi-national products as a whole, rather than an evaluation of a specific product or product line that is mainly reported in previous studies, and it is also very easy to apply to practice because it allows us to more carefully identify changes in psychological attitudes.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.521-533
• /
• 2000

This study was investigated to evaluate the morphologic characteristics of openbite and deep bite in Class I malocclusion patients and to find skeletodental factors which contributed to vertical discrepancy in Class I malocclusion. The subjects were consisted of 40 control subjects (male 20, female 20) and 40 Class I openbite patients and 40 Class I deep bite patients. Lateral cephalograms in centric occlusion were taken, traced and digitized lot each subjects. The computerized statistical analysis were carried out with SPSS program. The results were as follows. 1. The pattern of vortical discrepancy in Class I malocclusion is mainly influenced by the skeletodental factors under palatal plane. 2. In openbite group, vortical discrepancy is prominent on anterior lower face and is closely related with skeletal factors such as mandibular form and inclination. 3. In deep bite group, dental factors such as ewe of Spee, vertical height of maxillary molar and skeletal factor such as articular angle were contributed to the vertical discrepancy. 4. The multiple regression analysis showed that overbite in Class I molar relationship was determined mainly by dental factors such as lower incisor to occlusal plane angle, curve of Spee, interincisal angle, and ODI.

• The korean journal of orthodontics
• /
• v.25 no.6 s.53
• /
• pp.675-688
• /
• 1995

The purposes of this study were:1) to determine the normal range of CR-CO discrepancy in normal occlusion group ; 2) to evaluate the changes of condylar position and craniofacial morphology between centric relation and centric occlusion before and after stabilization splint therapy in malocclusion group outside the normal range of CR-CO discrepancy. The normal occlusion group consisted of 80 subjects who had well-balanced faces and good occlusions with acceptable Class I molar relationship. They had not been treated orthodontically and had no signs or symptoms of temporomandibular joint dysfunction. 71 malocclusion patients enrolled for orthodontic treatment at the Department of Orthodontics, College of Dentistry, Chosun University comprised the malocclusion group, little variation of growth factor by the second molar eruption. They had CR-CO discrepancy beyond normal range and were subdivided into anterior-posteriorly -[25 Class I (0$\geq$4), and 24 Class III (ANB$\leq$0)] : vertically - [20 Normodivergentscy (30$\geq$34), and 18 Hypodivergency (SNGoMe$\leq$30)] ; and sexually - [26 Male and 45 Female]. For malocclusion group, stabilization splint with mutually protected type of occlusal scheme was applied for three months. Panadent articulators, Panadent condylar position indicator (CPI), and lateral headfilm were used to investigate the influence of stabilization splint on condylar position and craniofacial morphology. The results of this study were as follows. 1. The amounts of CR-CO discrepancy in normal occlusion were that the antero-Posterior component (${\bigtriangledown}X$) was $0.56\pm0.46mm$ (Male:$0.63\pm0.42mm$, Female:$0.49\pm0.50mm$) ; the supero-inferior component (${\bigtriangledown}Y$) was $-0.75\pm0.48mm$ (Male:$-0.76\pm0.52mm$, Female:-$0.73\pm0.43mm$) : and the transverse component (${\bigtriangledown}Z$) was $-0.33\pm0.28mm$ (Male : $-0.38\pm0.29mm$, Female:$-0.31\pm0.27mm$). 2. The condylar position was in normal range after stabilization splint therapy. 3. The mandible was always rotated infero-posteriorly after stabilization splint therapy. 4. Antero-posteriorly, Class III malocclusion responded very well to the stabilization splint therapy. 5. Vertically, Hyperdivergency responded very well to the stabilization splint therapy 6. Sexually, Male responded very well to the stabilization splint therapy.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.41-49
• /
• 2003

This study examined the relations between degree of posterior dental compensation and skeletal discrepancy in Class III malocclusion. The pretreatment lateral cephalogras and dental casts of 87 skeletal Class III adults were selected to provide a random sampling of skeletal Class III malocclusion. Skeletal discrepancy was described with ANB angle, Wits appraisal, SN-Mn plane angle, FMA and ratios of basal arch width. Degree of posterior dental compensation was described with maxillary intermolar angle, mandibular interolar angle and sum of intermoloar angle. The relationships between skeletal discrepancy and degree of posterior dental compensation were analyzed with simple correlation analysis, stepwise multiple regression analysis. The results were as follows 1. A strong association was found between the variation in the anteroposterior measure, ANB angle and the variation of posterior dental compensation measures, sum of intermolar angle and mandibular intermolar angle in skeletal Class III malocclusion. 2. There was no statistically significant relationship between the variation in the vertical measures and the variation of posterior dental compensation measures in skeletal Class III malocclusion. 3. There was no statistically significant relationship between the variation in the anteroposterior and vortical measures and degree of basal arch width discrepancy.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.313-324
• /
• 2004

The Purpose of this study was to investigate the predictors of relapse in orthodontic treatment of skeletal Class III malocclusion in growing patients. A total of 55 patients were studied and all subjects were divided into two groups according to their stability in the post-treatment stage. Of the sample, 33 patients were included in the stable group and the remaining 22 were assigned to the relapse group. Cephalometric data of the pre-treatment stage was taken and compared between the stable and relapse group. The following results were obtained through t-test: 1. This study presented statistical evidence to show that the major skeletal determinant of prognosis in Class III orthodontic treatment was not anteroposterior discrepancy .but vertical discrepancy, especially within the AB-maxillo mandibular triangle. Vertical angular measurements that showed statistically significant differences were AB-MP and ODI(P<0.01) and the vortical ratio measurements were MP-P/AL and PP-P/AL(P<0.05). 2. Relapse tendency increased with the steep occlusal Plane, especially the steep lower occlusal plane. As to occlusal plane, there were statistically significant differences in OP(L)-PP, OP-PP, AB-OP(L) and Wits appraisal(P<0.05). This study claimed that anteroposterior discrepancy was not necessarily the proper criteria to predict relapse. Vertical discrepancy had a significant effect on post-treatment stability.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.452-456
• /
• 2013

PURPOSE. The aim of this study was to evaluate the repeatability of the digitizing of silicon rubber impressions of abutment teeth by using a white light scanner and compare differences in repeatability between different abutment teeth types. MATERIALS AND METHODS. Silicon rubber impressions of a canine, premolar, and molar tooth were each digitized 8 times using a white light scanner, and 3D surface models were created using the point clouds. The size of any discrepancy between each model and the corresponding reference tooth were measured, and the distribution of these values was analyzed by an inspection software (PowerInspect 2012, Delcamplc., Birmingham, UK). Absolute values of discrepancies were analyzed by the Kruskal-Wallis test and multiple comparisons (${\alpha}$=.05). RESULTS. The discrepancy between the impressions for the canine, premolar, and molar teeth were $6.3{\mu}m$ (95% confidence interval [CI], 5.4-7.2), $6.4{\mu}m$ (95% CI, 5.3-7.6), and $8.9{\mu}m$ (95% CI, 8.2-9.5), respectively. The discrepancy of the molar tooth impression was significantly higher than that of other tooth types. The largest variation (as mean [SD]) in discrepancies was seen in the premolar tooth impression scans: $26.7{\mu}m$ (95% CI, 19.7-33.8); followed by canine and molar teeth impressions, $16.3{\mu}m$ (95% CI, 15.3- 17.3), and $14.0{\mu}m$ (95% CI, 12.3-15.7), respectively. CONCLUSION. The repeatability of the digitizing abutment teeth's silicon rubber impressions by using a white light scanner was improved compared to that with a laser scanner, showing only a low mean discrepancy between $6.3{\mu}m$ and $8.9{\mu}m$, which was in an clinically acceptable range. Premolar impression with a long and narrow shape showed a significantly larger discrepancy than canine and molar impressions. Further work is needed to increase the digitizing performance of the white light scanner for deep and slender impressions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.90-96
• /
• 2014

Purpose: The purpose of this study is to see what impact the heat and press-on-metal technique has on the marginal fit of metal ceramic crown. Materials and methods: Prior to the experiment, 4 metal master models were prepared. Each model has margin of chamfer, margin of heavy chamfer, margin of shoulder with bevel and margin of shoulder (collarless). Additionally, 10 crowns were made for each margin, total of 40 crowns. Marginal discrepancy between the master model and crown was observed at ${\times}100$ microscopic magnification in two states; in coping state and upon completion of making metal ceramic crown. Data analysis was performed using paired t-test along with one-way ANOVA and Duncan multiple comparison test. Results: After analyzing mean and standard deviation of marginal discrepancy, it was confirmed that marginal discrepancies were within the clinical permitted range for all states; in coping state and upon completion of making metal ceramic crown. For the chamfer group, a significant increase in marginal discrepancy upon completion of making metal ceramic crown was observed compared to the heavy chamfer group. Also, a marginal discrepancy of porcelain margin in shoulder group was significantly less than the marginal discrepancy of metal margin in chamfer and shoulder group. Conclusion: From the test result, one can conclude that marginal fit of metal ceramic crown built with heat and press-on-metal technique is not significantly different from marginal fit of metal ceramic crown built with traditional technique. And along with efficiency of this system, heat and press-on-metal technique is considered in clinic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.173-181
• /
• 2017

This study was conducted to investigate the effects of sociocultural attitude toward appearance, social pressure, and stress on university students' body figure discrepancy. A total of 363 students were recruited from a university in C and A city. Data were collected by self-reported questionnaires from Oct 27 to Dec 9, 2016. Statistical analyses of the collected data were conducted using SPSS 20.0 and consisted of descriptive statistics, Pearson's correlation, and multiple regression. A positive relationship was observed between body figure discrepancy and female's sociocultural attitude toward appearance (r=.406, p=.006), peer pressure (r=.197, p<.001), parental pressure (r=.176, p=.002), and stress (r=.218, p<.001). Body figure discrepancies increased with peer pressure (${\beta}=.159$, p=.007), stress (${\beta}=.186$, p=.002), and BMI (${\beta}=.186$, p=.002), and these factors accounted for 10.9% of the body figure discrepancy. To reduce body figure discrepancy, it is necessary to develop health education and promotion programs that enable university students to manage weight and stress for health maintenance and to have positive self-assessment without being hurt by other people's view or evaluation.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.6-17
• /
• 2009

Objective: The purpose of this study was to evaluate the possibility of using a digital model and cone beam computed tomograph(CBCT) image for model analysis. Methods: Model analyses of CBCT images, plaster models, and digital models of 20 orthodontic patients with a permanent dentition with no proximal metal restorations, were compared. Results: The average differences of tooth size measurements were 0.01 to 0.20 mm, and the average difference of arch length discrepancy measurements were 0.41 mm in the maxilla and 0.82 mm in the mandible. The difference in Bolton discrepancy measurements was 0.17 mm for the anterior region and 0.44 mm overall but with no statistically significant difference. When comparing CBCT images with plaster models, the average differences in tooth size measurements were -0.22 to 0.01 mm, and the average differences in arch length discrepancy measurements were 0.43 mm in the maxilla and 0.32 mm in the mandible. Difference in Bolton discrepancy measurements were 0.35 mm in the anterior region and 1.25 mm overall. CBCT images showed significantly smaller overall Bolton discrepancy measurements. Conclusions: Although there were statistically significant differences in some model analysis measurements, the ranges of measurement errors of the digital model and CBCT images were clinically acceptable. Therefore, a digital model and CBCT image can be used for model analysis.