• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2013년도 춘계 종합학술대회 논문집
• /
• pp.443-444
• /
• 2013

빈발하고 있는 대규모 홍수와 자연재해는 정확도가 높은 하천 흐름 수치해석 모델에 대한 관심의 증대로 이어지고 있다. 현재 하천에서 발생하는 일반적인 흐름은 기존에 개발된 여러 형태의 천수방정식을 지배방정식으로 하는 수치기법에 의해 해석되고 있으나, 연속적이지 않은 형태의 흐름을 해석하거나 매우 정확한 해석을 필요로 하는 경우에는 기존의 수치해석기법은 많은 한계를 보여 주고 있다. 본 연구에서는 불연속 갤러킨 기법 기반의 흐름 모델을 개발하고, 이를 이용하여 천이류로 분류되는, 댐 붕괴파, 둔덕위 흐름과 2차원 사류의 모의에 적용하여 기존의 수치해와 잘 일치함을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.261-261
• /
• 2000

This paper analyzes the characteristics of pre-sliding friction of an X-Y table of CNC machining center at velocity reversal, and presents a simple and effective method of friction compensation based on this characteristics. At velocity reversal, a large position tracking error occurs because of the discontinuous change of friction. The relationship between the occurrence time of maximum position tracking error and the acceleration at zero velocity is analyzed by using the spring-like friction model. Furthermore, the experimental observation verifies this relation. From this, the state transition tine from pre-sliding regime into sliding regime can be predicted. Using the predicted transition time, the friction can be effectively compensated and table experimental results show its effectiveness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.23-30
• /
• 1996

The purpose of this study was to investigate changes in thewall thickness of tube sinking and working forces by the upper bound method and ABAQUS code. The independent variables were : Workpiece material, original wall thickness of tube, die angle, friction, and diameter reduction. The results indicated that of these five variables were a factor in wall-thickness increase and working forces. Three variables, a inner tube wall angle and two angles of the velocity discontinuous surfaces, are optimized in this proposed velocity field by the upper bound method. In this method, we can estimate the working forces and final tube thicknesses whcih are similar to acturla forming process. Optimized process variables which are obtained by upper bound method are used in ABAQUS pre-model . In ABAQUS analysis, the stress and the strain contours which are considered to be heat generation occured by the friction during forming process are observed.

• 소성∙가공
• /
• 제6권6호
• /
• pp.517-526
• /
• 1997

The purpose of this study is to investigate changes in the wall thickness of tube sinking and working forces by the upper bound method and ABAQUS code. The independent variables are ; workpiece material, original wall thickness of tube, die angle, friction, and reduction of diameter. The results indicate that these five variables are factors of the increase in wall-thickness and working forces. Three variables, a inner tube wall angle and two angles of the velocity discontinuous surfaces, are optimized in this proposed velocity field by the upper bound method. In this method, we can estimate the working forces and final tube thicknesses similar to actual forming process. Optimum process variables which are obtained by upper bound method are used in ABAQUS pre-model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.61-65
• /
• 1996

This paper experimentally describes the grinding characteristic of discontinuous grinding wheels in creep-feed grinding. In creep-feed grinding, grinding temperature increases rapidly and thermal damage such as a burn occurs on a workpiece. Discontinus grinding wheel with Conventional grinding wheel shows an exellent cooling effect has been developed. The wheels have 6, 12, 24 pieces of slotted which compare with characteristics of each wheels

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제6권2호
• /
• pp.9-24
• /
• 2002

Total Variation(TV) regularization method is effective for reconstructing "blocky", discontinuous images from contaminated image with noise. But TV is represented by highly nonlinear integro-differential equation that is hard to solve. There have been much effort to obtain stable and fast methods. C. Vogel introduced "the Fixed Point Lagged Diffusivity Iteration", which solves the nonlinear equation by linearizing. In this paper, we apply multigrid(MG) method for cell centered finite difference (CCFD) to solve system arise at each step of this fixed point iteration. In numerical simulation, we test various images varying noises and regularization parameter $\alpha$ and smoothness $\beta$ which appear in TV method. Numerical tests show that the parameter ${\beta}$ does not affect the solution if it is sufficiently small. We compute optimal $\alpha$ that minimizes the error with respect to $L^2$ norm and $H^1$ norm and compare reconstructed images.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권2호
• /
• pp.137-150
• /
• 2016

In this paper we analyze an a posteriori error estimator based on flux recovery for lowest-order finite element discretizations of elliptic interface problems. The flux recovery considered here is based on averaging the discrete normal fluxes and/or tangential derivatives at midpoints of edges with weight factors adapted to discontinuous coefficients. It is shown that the error estimator based on this flux recovery is equivalent to the error estimator of Bernardi and $Verf{\ddot{u}}rth$ based on the standard edge residuals uniformly with respect to jumps of the coefficient between subdomains. Moreover, as a byproduct, we obtain slightly modified weight factors in the edge residual estimator which are expected to produce more accurate results.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제25권1호
• /
• pp.1-8
• /
• 1986

It is a common saying that markov-chain is a special case of probability course. That is to say, It means an unchangeable markov-chain process of the transition-probability of discontinuous time. There are two kinds of ways to show transition probability parade matrix theory. The first is the way by arrangement of a rightangled tetragon. The second part is a vertical measurement and direction sing by transition-circle. In this essay, I try to find out existence of procession for transition-probability applied markov-chain. And it is possible for me to know not only, what it is basic on a study of chain but also being applied to abnormal problems following a flow change and statistic facts expecting to use as a model of air expansion in physics.

• 터널과지하공간
• /
• 제4권1호
• /
• pp.1-16
• /
• 1994

The study on the flow characteristics and analysis of groundwater in discontinuous rock mass is very important, since the water inflow into the underground opening during excavation induces serious stability and environmental problems. To investigate the flow through single rock joint, the effect of various aperture distribution on the groundwater flow has been analyzed. Observed through the analysis is the "channel flow", the phenomenon that the flow is dominant along the path of large aperture for given joint. The equivalent hydraulic conductivity is estimated and verified through the application of the joint network analysis for 100 joint maps generated statistically. Both the analytic aproach based on isotropic continuum premise and the joint network analysis are tested and compared analyzing the gorundwater inflow for underground openings of different sizes and varying joint density. The joint network analysis is considered better to reflect the geometric properties of joint distribution in analyzing the groundwater flow.ater flow.

• 소성∙가공
• /
• 제5권4호
• /
• pp.327-336
• /
• 1996

The effect of dynamic strain aging on high temperature deformation behaviour of the A-Mg alloy was investigated by strain rate change tests and stress relaxation tests between 20$0^{\circ}C$and 50$0^{\circ}C$. Yield point, short stress transient and periodic discontinuities on the stress-strain curve were considered as an evidence of the effect of dynamic strain aging. With this criterion two distinct strain rate-temperature regimes could be manifested. Dynamic strain aging was considered to be effective in the high temperature-low strain rate regime, whereas dynamic recovery was a dominant deformation mechanism in the low temperature-high strain rate regime. It was found that dynamic strain aging in the high temperature deformation was governed by the mechcanism of diffusion-controlled, viscous dislocation movement.