• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.189-194
• /
• 2013

Single phase crystalline powders of $Mg_3Sb_2$ and $Mg_3Bi_2$ were prepared by mechanical alloying Mg, Sb and Bi metals with planetary ball milling for 24~48 h. The compositions of starting raw materials for single phase $Mg_3Sb_2$ and $Mg_3Bi_2$ were 3Mg : 1.8Sb and 3Mg : 1.6Bi, respectively. Two types of mechanically alloyed powders obtained were mixed at some ratios for the fabrication of $Mg_3Sb_2-Mg_3Bi_2$ composites and then hot pressed under uniaxial pressure of 70 MPa at 723 K for 1 h. The main phase of composites was a stable phase similar to $Mg_3Bi_2$ phase with a small amount of Bi phase. The distributions of Sb and Bi elements on EDS mapping images were discontinuous and their compositional contours were clear, which means that the hot pressed specimens were composites composed of two compounds of $Mg_3Sb_2$ and $Mg_3Bi_2$.

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.3
• /
• pp.9-15
• /
• 2000

We Propose a sensor fusion technique for motion capture system. In our system, two kinds of sensors are used for mutual assistance. Four magnetic sensors(markers) are attached on the upper arms and the back of the hands for assisting twelve optical sensors which are attached on the arms of a performer. The optical sensor information is not always complete because the optical markers can be hidden due to obstacles. In this case, magnetic sensor information is used to link discontinuous optical sensor information. We use a system identification techniques for modeling the relation between the sensors' signals. Dynamic systems are constructed from input-output data. We determine the best model from the set of candidate models using the canonical system identification techniques. Our approach is using a simple signal processing technique currently. In the future work, we will propose a new method using other signal processing techniques such as Wiener or Kalman filter.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.164-170
• /
• 2002

Sliding mode control, as a typical method of variable structure control, has the robust characteristics for the uncertainty and the disturbance of the nonlinear system. Because, however, sliding mode control input includes a sign function that Is discontinuous on the predefined switching surface, its applications are primarily limited by the need of alleviation or reduction of chattering. In this paper, we propose a chattering alleviation strategy based on a special nonlinear function and a fuzzy system. By using the proposed control scheme, we can reduce the steady state error. Its tracking performance is as fast as that of conventional method using the fixed boundary layer. Especially, in the proposed method, we can adjust the trade-off between the steady state error and the degree of chattering by regulating the proper range of the output variable of the fuzzy system. To verify the validity of the proposed algorithm, the analysis of the control method using the fixed boundary layer and the computer simulations are shown to compare with them.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.10
• /
• pp.55-65
• /
• 2014

Recent researches on debris flow is focused on understanding its movement mechanism and building a numerical simulator to predict its behavior. However, previous simulators emulating fluid-like debris flow have limitations in numerical stability, geometric modeling and application of various boundary conditions. In this study, depth integration is applied to continuity equation and force equilibrium for debris flow. Thickness of sediment, and average velocities in x and y flow direction are chosen for main variables in the analysis, which improve numerical stability in the area with zero thickness. Petrov-Galerkin formulation uses a discontinuous test function of the weighted matrix from DG scheme. Presented mechanical constitutive model combines fluid and granular behaviors for debris flow. Effects on slope angle, inducing debris height, and bottom friction resistance are investigated for a simple slope. Numerical results also show the effect of embankment at the bottom of the slope. Developed numerical simulator can assess various risk factors for the expected area of debris flow, and facilitate embankment design in order to minimize damage.

• The Journal of Engineering Geology
• /
• v.11 no.1
• /
• pp.13-23
• /
• 2001

Rock slope near the road or railroad is affected by the outside temperature and iterative freezing-thawing process during winter and early spring. The purpose of this study is to analyze the stability of rock slope which is iniluenced by deterioration due to the freezing-thawing. Method of analysis is homogenization method which find the strength property of discontinuous rock mass and as a strength failure criterion, Drucker-Prager failure criterion is used, The deterioration property of real rock is obtained by a freezing-thawing labordtory test of tuff and this quantitative property is used as a basic data of stability analysis of rock mass. To evaluate the deterioration depth due to the freezing-thawing in the field rock slope, one dimensional heat conductivity equation is used and as a a result we can find the depth of which is affected by a temperature. After determined the freezing-thawing depth of model slope, the pattern of rock mass strength value of model rock slope which excess the limit of self-load is analyzed.

• Applied Microscopy
• /
• v.20 no.1
• /
• pp.17-35
• /
• 1990

Effect of 5-hydroxytryptamine(5-HT, serotonin) and its precursor tryptophan on the cell proliferation of brain and somite parts of 4 day chick embryo in Dulbeco's modified essential medium was examined morphologically at cellular level. It was realized that the externally added 5-HT and/or tryptophan disturbed cell proliferation and severve necrosis occured. Electron micrograph showed that the development of cell organelles were greatly impaired. The activities of both acetylcholine esterase and $Mg^{2+}$ -dependent ATPase of the brain tissues of 5 day chick embryo, which received 1mg of tryptophan and/or 0.1mg of 5-HT at primitive streak stage after 24 hrs incubation of the fertilized egg, were much lower(about 20-25%) than those of control group. These results were supported by the electron micrographs of chemically treated cells. Control cells showed clear densed bands of acetylcholine esterase activity around nucleus and rough endoplasmic reticulum but tryptophan or 5-HT treated groups showed discontinued activity bands. In the case of $Mg^{2+}$-ATPase, the control groups showed clear continuous activity bands but tryptophan and/or 5-HT treated groups were discontinuous. From the previous and present studies, it seems that the intracelluar 5-HT level is very important for the cell proliferation and normal morphogenesis.

• The Korean Journal of Food And Nutrition
• /
• v.8 no.4
• /
• pp.307-317
• /
• 1995

The purity of mtDNAs isolated from Archicitrus and Metacitrus leaves was higher in percoll density gradient centrifugation than differential and sucrose density gradient centrifugation. The most clear mtDNAs were obtained from mitochondria included in the Interface band of between 21% and 45% under isomotic, low viscosity conditions in the three step discontinuous percoll density gradient centrifugation. DNase treatment to the crude mitochondrlal suspension still more increased purity of mtDNA by the effective removal of the nuclear and chloroplast DNA and mtDNAs were appeared as a single band at middle position of tube by EtBr /cscl density gradient centrifugation. Agarose gel electrophoresis of mtDNAs resolved a single, broad band containing high molecular weight DNAs In all preparation. Yield of mtDNAs was about 110 and 2 ug Per 2009 in mature and immature leaves respectively. The mtDNA fragment patterns showed by EcoR I treatment were indistinguishable with respect to nom bet and position of bands in Archicitrus and Metacitrus. In the pattern of Hind E restriction, the Metacitrus displayed the unique band between 5.0 and 4.0kb, in addition to four fragments about 5.0, 2.4, 2.15, and 2.0kb, respectively, different from Archicitrus. Also the pattern of total mtDNAs fragment by the treatment of Pst I showed that the distinguishable fragment pat tern was not appeared in Archicitrus(C. iyo Tanaka), but about 6.0, 5.5, 5.0 and 2.Bkb fragments were appeared only in Metacitrus(C. junos Sieb). Therefore it was indicated that two species in intra-subgenus were identical each other, whereas considerable difference was revealed for inter-subgenus.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.492-499
• /
• 1997

The effect of oxidants, gluten and gums on breadmaking quality of wheat-purple sweet potato(Ipomoea batatas) composite flour were studied. Alveograph tests of doughs showed that all additives increased the P, L and W values. Of these additives, L-Ascorbic acid, gluten, carboxy methyl cellulose have a significant effect on alveogram indexes. SEM showed that the dough added with additives changed some what in appearance when compared with the control. When oxidants was added, the doughs discontinuous gluten film were observed. No significant differences ,were evident in bread crumb color among the additives. And textural characteristics of bread crumb were influened by adding additives. Breads containing additives showed an increase in max weight, strength and hardness and a decrease in springness and cohesiveness. Average enthalpy values for all bread crumb after 7days increased with storage time. However, addition of additives decrease the rate of staling slightly more than that of the control. Addition of L-Ascorbic acid, L-Cystine, carboxy methyl cellulose and hydroxy propyl methyl cellulose increased the loaf volume significantly, and with except potassium bromate bread scores were acceptable.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.8
• /
• pp.748-755
• /
• 2012

Friction causes self-excited vibration, stick-slip vibration and any other friction-induced phenomena. That kinds of vibrations cause chatter and squeal. In order to predict such vibrations accurately, employing an accurate friction model is very important because a dynamic behavior of a system with friction is dominantly governed by a friction model. A Coulomb friction model is the most widely known model. Coulomb friction model is useful model to obtain analytical solutions of the system with friction and the model gives relatively good simulation result. However, defining a friction force at a stick state in simulation is hard because of the characteristic itself and a Coulomb friction model is discontinuous function between a static and a dynamic friction coefficient. Therefore, applying the Coulomb friction model to a simulation is not appropriate. In order to resolve these problems, an approximated Coulomb friction model was developed using simple and continuous function. However, an approximated Coulomb friction model cannot realize stick. Therefore, an approximated Coulomb friction model cannot describe friction phenomena accurately. In order to analyze a friction phenomenon accurately, a friction model for a simulation was proposed in this paper. A proposed friction model realizes stick and gives reasonably good results compared to results obtained by the simulation employing an approximated Coulomb friction model. Accuracy of a proposed friction model was verified by comparing experimental results.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.6
• /
• pp.1617-1621
• /
• 2004

The aim of this study was to investigate the apoptotic effect and its mechanism on Radix Paeoniae Alba Extract(RPAE) in DU145 human prostate cancer cell line. RPAE induced apoptosis in a dose-dependent manner in DU145 cells as confirmed by both discontinuous DNA fragmentation using Hoechst33342 staining and poly-(ADP-ribose) polymerase(PARP) cleavage, which are apoptotic signs. To clarify the mechanisms on RPAE-induced apoptosis, we examined the p50(NF-κB subunit), IκBα, PTEN and Par-4 protein expression using Western blotting. Treatment with RPAE resulted in the decrease of p50 expression by IκBα increase, which resulted in Par-4 increase and bcl-2 decrease in DU145 cells. These results suggest that apoptosis of DU145 cells by RPAE involved decreases of NF-κB activation and bcl-2 expression, increase of Par-4 protein expression.