• 제목/요약/키워드: discharge delay

검색결과 124건 처리시간 0.023초

로테르담규칙상 항만터미널운영자에 관한 연구 - 히말라야조항의 적용과 관련하여 - (A Study on Port Terminal Operator's Liability under Rotterdam Rules)

  • 송수련;민주희
    • 무역상무연구
    • /
    • 제58권
    • /
    • pp.127-148
    • /
    • 2013
  • The Rotterdam Rules provide that port terminal operator may avoid or limit their liability for cargo loss, damage or delay in delivery or breach of any other obligation under the Rules by invoking the provisions that may provide a defence for, or limit the liability of, the carrier. Consequently the port terminal operator who are involved in the provision of maritime services may avoid or limit their liability for cargo loss, damage or delay in delivery or breach of any other obligation under the Rules. The port terminal operator to be applied for the Himalaya clause under the Rules must show that it has the requisite link with a Contracting State. In addition, the port terminal operator performs service to the period of time between the arrival of the goods at the port of loading and their departure from the port of discharge. The port terminal operator's liability for breaches of its obligation is limited to 875 SDR per package or other shipping units, or 3 SDR per kilogram of the gross weight of the goods. In addition, compensation for delay shall be limited to an amount equivalent to two and one-half times the fright payable on the goods delayed.

  • PDF

최적 증착 속도로 형성된 MgO를 갖는 인-라인 진공 실장된 플라즈마 디스플레이 패널의 방전 특성에 관한 연구 (A Study on Discharge Characteristics of the PDP Packaged with In-situ Vacuum Sealing with the MgO Protective Layer Deposited by Optimal Evaporation Rate)

  • 이조휘;조의식;권상직
    • 한국전기전자재료학회논문지
    • /
    • 제21권10호
    • /
    • pp.916-922
    • /
    • 2008
  • AC PDP with MgO protective layer coated with the optimum evaporation rate of $5{\AA}/s$ can generate more enhanced efficiency through the vacuum in-line sealing process. However, the optimized process conditions still require the optimum driving scheme on the ramp-up and ramp-down slope of the reset waveform for enhancing the efficiency. In this paper, for the in-situ vacuum sealed PDP with the optimum evaporation rate of MgO protective layer, the address delay time was investigated with various slopes of ramp waveform during a reset ramp-up and ramp-down period. In this study, the minimum statistical delay time was obtained at the ramp-up rate of $6.0 V/{\mu}s$ and the ramp-down rate of $0.7 V/{\mu}s$ of the reset waveform.

플라즈마 디스플레이 판넬의 제작 및 특성 연구 (A Study on the Fabrication of Plasma Display Panel and It's Characteristics)

  • 김준식;최경철;신범재;황기웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1990년도 추계학술대회 논문집 학회본부
    • /
    • pp.157-160
    • /
    • 1990
  • A dot matrix type DC Plasma Display Panel was fabricated and it's characteristics was investigated. Paschen curve and I-V curve of various gas mixture was given. Optimal gas mixing ratio, pressure and operating point was determined. The priming effect was observed and discharge delay time was measured with varing applied voltage, priming current, priming distance, duty ratio.

  • PDF

새로운 고속 저전력 TSPC D-플립플롭을 사용한 CMOS Dual-Modulus 프리스케일러 설계 (Design of a CMOS Dual-Modulus Prescaler Using New High-Speed Low-Power TSPC D-Flip Flops)

  • 오근창;이재경;강기섭;박종태;유종근
    • 전기전자학회논문지
    • /
    • 제9권2호
    • /
    • pp.152-160
    • /
    • 2005
  • 프리스케일러는 PLL을 이용한 주파수합성기의 동작속도를 좌우하는 중요한 구성블록으로써, 고속 동작 특성과 저전력 소모 특성을 동시에 만족해야 한다. 따라서 프리스케일러에 사용되는 D-플립플롭의 설계가 중요하다. 기존의 TSPC D-플립플롭은 출력단의 글리치나 비대칭적인 전파지연시간, 클럭의 프리차지구간에서 내부노드의 불필요한 충 방전으로 인해 소비전력이 증가하는 단점이 있다. 본 논문에서는 이러한 단점을 개선한 새로운 동적 플립플롭을 제안하였다. 제안한 플립플롭은 방전억제방식을 사용하여 글리치를 최소화하였고, 대칭적 전파지연시간을 만들어줌으로써 속도를 향상시켰으며, 불필요한 방전을 제거하여 저전력 특성을 얻을 수 있었다. 제안된 플립플롭의 성능평가를 위해 $0.18{\mu}m$ CMOS 공정변수를 이용하여 128/129 분주 프리스케일러를 구성한 결과 최대 5GHz까지 동작 하였으며, 이는 같은 조건에서 4.5GHz까지 동작하는 기존의 회로에 비해 향상된 결과이다. 또한 4GHz에서 전력소모가 0.394mW로 기존구조에 비해 약 34%의 전력소모를 줄일 수 있다.

  • PDF

AC PDP의 순차 증가 Address 전압 방식에 의한 고온 오방전 대책에 관한 연구 (A Study on the Compensation of Temperature-Dependent Misfiring in AC PDP by the progressively increasing Address Voltage Method)

  • 김준연;이상진;권병대;김동현;이호준;박정후
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 C
    • /
    • pp.1623-1627
    • /
    • 2002
  • If the ambient temperature rises in AC PDP, some of the discharged cells arc turned off because of the addressing failure. Particularly, the addressing failure at the last scan line is more serious than at the first scan line. The failure is accompanied with delay of the address discharge and reduction of total charge involved. In order to compensate this kind of misfiling, the progressively increasing address voltage waveform is used instead of constant one. In this method, we found that the total charge and address time at the last scan line are similar to those of the first line. As a result, we can have stable discharge without misfiring even at the high ambient temperature.

  • PDF

Long Pulse Generation Technology of an Alexandrite Laser System for Hair Removal

  • Kim, Hee-Je;Park, Jin-Young;Kwak, Su-Young;Kim, Su-Weon;Min, Byoung-Dae;Jung, Jong-Han;Hong, Jung-Hwan
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제3C권4호
    • /
    • pp.155-160
    • /
    • 2003
  • In this study, an Alexandrite laser system for hair removal adopting a multi-discharge method in which three flash lamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. Specifically, this study demonstrates a technology that makes it possible to formulate various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a PIC (program integrated circuit) one-chip microprocessor. With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and real-time control is possible with an external keyboard, enabling an assortment of pulse shapes. In addition, longer pulses can be more widely used for industrial processing as well as for numerous medical purposes.

PBD 공법 시공사례를 통한 교훈 및 개선안 제안 (Lesson and proposal of revised equations from the Pan method application case for soft clay improvement)

  • 유한구;조영묵;김종석;박정규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.147-158
    • /
    • 2001
  • In general, two methods have been used to predict settlement of soft ground. One method is Terzaghi's one dimensional consolidation theory which gives time-settlement relationship using the standard consolidation test results. The other is forecasting method of ground settlement to be occured in the future using in-situ monitoring data. The above both methods have some defects in application manner or in itself especially in very deep and soft clayey ground. In view of the lessons and experiences of soft ground improvement projects, several techniques were proposed for more accurate theorectical calculation of consolidation settlement as follows ; ① Subdivision of soft ground, ② Consideration of secondary compression, ③ Using the modified compression index, etc. And also, revised hyperbolic fitting method was suggested to minimize the error of predicted future settlement. In addition, revised De-Beer equation of immediate settlement of loose sandy soil was proposed to overcome the tendency to show too small settlement calculation results by original De-Deer equation. And also, considering the various effects of settlement delay in the improved ground by vertical drains, time-settlement caculation equation(Onoue method) was revised to match the tendency of settlement delay by using the characteristics of discharge capacity decreases of vertical drain with time elapse by the pattern of hyperbolic equation.

  • PDF

항해용선계약상 도착선의 판단기준에 관한 연구 (A Study on the Judgement Criterion of Arrived Ship under Voyage Charterparty)

  • 한낙현;이재성
    • 한국항만경제학회지
    • /
    • 제28권3호
    • /
    • pp.167-192
    • /
    • 2012
  • 본 연구는 항해용선계약상 목적지표시의 원칙과 그 운용에 대해 Merida호 사건을 중심으로 분석하는 것에 목적이 있다. 선박이 항에 있거나 용선자의 자유재량으로 선박의 도착이 즉각적 또는 효과적으로 용선자의 이용에 맡길 수 있는 선석으로 즉각 도달하거나 또는 그와 같은 위치에 있는 선박은 도착선이 된다. 선박이 용선계약의 조건에 의해 화물을 선적 또는 양하할 의무가 있는 장소에서 지연이 발생한 경우 선박이 선석 또는 항에 있는지의 여부에 불구하고 특정 목적지의 식별표시는 화물의 선적 또는 양하함에 있어 지연에 의해 발생한 손해사고에 대해 영향을 미친다. Merida호 사건은 2009년 4월 20일 용선자가 2명의 저명한 중재인의 최종중재재정에 대해 상소한 사안이다. 2007년 2월 5일 본선 Merida호에 대해 용선자와 선박소유자 간에 체결한 항해용선계약은 Berth Charter이기 보다는 Port Charter이었다. 선주와 용선자 간에 이 차이에 대한 기본적인 관련성은 선적항과 양륙항에서 선박혼잡에 의해 발생한 지연위험의 분담이다. 이 상소에서 제기된 법적 쟁점으로서 중재인이 이 용선계약은 Port Charter이며 Berth Charter가 아니라는 판정을 내릴 수 있는 권리가 있는지 여부이었다. 중재인은 용선자가 하역준비완료통지서의 유효성에 대해서는 논쟁하지 않았다는 것을 판정하면서 따라서 본 용선계약은 Port Charter라고 판정하였다.

치료중단행위에 대한 의료형법적 고찰 -의학적 충고에 반한 퇴원 사례를 중심으로- (A Study on Medical-criminal Problem of Withdrawing Life-Sustaining Treatment)

  • 조인호
    • 의료법학
    • /
    • 제9권1호
    • /
    • pp.319-382
    • /
    • 2008
  • As a withdrawing care's study, the purpose of this study is searching about withdrawing care's acceptance and circumstances through Bora-mae hospital case(chapter 1). Withdrawing life-sustaining treatment has various forms. Though the meaning of euthanasia, death with dignity, natural death, physician assisted suicide are duplicated, the meaning of those are different slightly. Firstly, this study looks about the difference of the those meaning and acceptance range(condition) by withdrawing care's forms(chapter 2). Bora-mae hospital case sentenced guilty about physician who discharged incompetent patient who was after surgery by patient's wife determination. This Bora-mae case that sentenced guilty about discharge against medical advise(DAMA) that is regarded to custom has brought intensive confliction of legal, social, medical aspect, Bora-mae hospital case has many legal problems. First, as to criminal law rule 250(murder), the problem is whether discharge and withdrawing life-sustaining treatment is commission or omission. this study concluded omission(district court: omission, appeal, supreme court: commission). Because legal denounce point of discharge and medical treatment withdrawing is omission that physician who is obligatory on patient to cure. If physician's act is regarded omission, it is necessary to determine whether he has guardian status and obligation. Without guardian status and obligation, omission crime can't exist. This study decided that physician had guardian status and obligation and foundation of guardian status was pre-action or acceptance of emergency patient. Physician's medical treatment duty finished when patient(or patient's guardian) demands discharge. But when patient death is foreseen and other possible treatment does not exist, his duty of life prolonging treatment does not finish. This originate from physician's social responsibility and public status that limits patient's private liberty. This study regarded physician's action as accomplice about whether physician's discharging action is accomplice or the principal offender(district court: the principal offender, appeal, supreme court: accomplice). Though the principal offender needs criminal determination and action, there is no this common determination and functional action control of physician in Bora-mae case(chapter 3). Bora-mae hospital case partly originated from deficiency of legal, institutive system including medical security system shortage, the instruction is 1. medical security system strengthening, 2. hospital ethical committee's activity strengthening, 3. institutionalization of withdrawing life-sustaining treatment, 4. acceptance of pre-decision making system, 5. sufficient persuasion of physician for patient and faithful writing of medical paper, 6. respect for patients' self-determination and rights, 7. consciousness's changing for withdrawing life-sustaining treatment and persistent education about medical ethics(chapter 4). Considering Bora-mae case, medical sector is not the dead ground of a criminal punishment. Intervention of criminal law in medical sector give rise to ill effect, that is, excess medical examination and treatment, safeguard treatment, delay of discharge from a hospital. Because sufficient guarantee of life becomes mere empty slogan under situation that impose a burden of heavy cost to family or hospital, public and systematic solution should be given(chapter 5).

  • PDF

ISO/IEC 15118기반 V2G 환경에서 전기자동차 유연성 검토 (EV Flexibility Availability for V2G Considering ISO/IEC 15118 Charging Protocol)

  • 이상환;조규상;이상영;김영우;손성용
    • 한국정보전자통신기술학회논문지
    • /
    • 제14권1호
    • /
    • pp.91-97
    • /
    • 2021
  • 전기자동차를 이용하여 계통에 전력을 공급하는 Vehicle to Grid(V2G)의 구현을 위한 통신표준으로 ISO/IEC 15118이 적용되고 있다. 통신 프로토콜에 기반을 두는 전기자동차의 충방전 제어 시에 필연적으로 충방전 실행까지의 시간지연이 발생하게 되는데, 이러한 시간지연은 전력 유연성 공급 측면에서 제한의 요인이 된다. 본 연구에서는 ISO/IEC 15118 기반 V2G 에뮬레이터를 구현하고 전기 자동차 충방전 제어에 따른 반응성을 확인하였다. 실험결과 시간지연은 0.12ms로 나타났으며, 이를 기반으로 현 표준 하에서 참여 가능한 전력 유연성 시장에 대하여 검토하였다.