• Title/Summary/Keyword: direction turning

Search Result 191, Processing Time 0.024 seconds

보행 방향 전환 시 입각기 하지 및 체간의 운동형상학적 분석 (A Study on Kinematic Analysis of Trunk and Lower Extremities in Stance Phase of Walking according to Turning Direction)

  • 오태영
    • The Journal of Korean Physical Therapy
    • /
    • 제25권2호
    • /
    • pp.88-95
    • /
    • 2013
  • Purpose: The purpose of this study was to conduct an analysis of kinematics of lower extremities and trunk in stance phase of walking according to turning direction. Methods: Ten university students (five male, five female) who were in their 20s (mean age was 20.6 years old) participated in this study. Participants did not have participants did not have any problem with skeletal muscular system. We used the "Qualisys motion capture system" for analysis of trunk and lower extremity movement in stance phase of walking according to turning direction. We collected data while subjects walked a distance of 10 m, and at the 6 m line, subjects were required to turn to the left side and the right leg was positioned in stance phase and the left leg was positioned in swing. For data analysis, the SPSS for Windows ver. 20.0 statistics program was used in performance of one way analysis of variance according to turning direction. Results: Significant difference of trunk and lower extremities was observed for turning direction according to walking cycle (p<0.05). Upper trunk movement showed a greater increase at three dimensions than lower trunk, and in heel off phase, pelvic movement showed a greater increase than lower trunk (p<0.05). In 45 degree and 90 degrees of turning direction, all movements of trunk and lower extremities were significantly different among three events of stance phase (p<0.05). Conclusion: We suggest that three-dimensional movement analysis of trunk and lower extremities during turning movement was very important in order to indicate increasing balance or walking ability for people with impaired movement or walking.

Effect of Neck Rotating Directions on the Muscle Activity of Upper and Lower Trapezius during Shoulder External Rotation

  • Shin, Yong Wook;Kim, Chi Hwan;Han, Jin Tae
    • The Journal of Korean Physical Therapy
    • /
    • 제32권2호
    • /
    • pp.101-106
    • /
    • 2020
  • Purpose: This study examined the effects of the directions of neck rotation on the muscle activity of the upper trapezius and lower trapezius while rotating a shoulder externally. Methods: Twenty-five healthy males participated in this study. The subjects were asked to rotate their shoulder externally with 90° shoulder abduction and 90° elbow flexion in three different neck rotations (neutral, ipsilateral, and contralateral) in the prone position. The muscle activities of the upper and lower trapezius were measured using surface electromyography. One way repeated measures ANOVA was used to compare the muscle activity of the upper and lower trapezius depending on the different neck turning directions. Results: In the upper trapezius, turning the neck in the ipsilateral direction while turning a shoulder externally decreased the muscle activity significantly, but the muscle activity was increased significantly by turning the neck in the contralateral direction. On the other hand, in the lower trapezius, turning the neck in the ipsilateral direction increased the muscle activity significantly, but the muscle activity was decreased significantly by turning the neck in the contralateral direction decreased it significantly. Conclusion: When someone has an imbalance of shoulder function, turning the neck in the ipsilateral direction while turning the shoulder externally in the prone position is effective in decreasing the activity of the upper trapezius and increasing the activity of the lower trapezius. Therefore, these results could be used as basic evidence for researching patients with shoulder problems.

일어서서 걷기 검사 시 회전 방향이 뇌졸중 환자의 보행 시간에 미치는 영향 (Effect of Direction to be Used for the Timed Up and Go Test on Walking Time in Stroke Patients)

  • 이건;조철훈;임경진;이주현;윤규리;우영근
    • 한국전문물리치료학회지
    • /
    • 제23권2호
    • /
    • pp.11-19
    • /
    • 2016
  • Background: In the stroke patients with the characteristics of hemiplegic gait, turning direction of the affected and unaffected side influences turning time. Therefore, it is important to investigate the walking response to turning directions in stroke patients. Objects: This study aimed to measure the walking time while turning direction in hemiplegic patients depending on balance ability measured by Berg Balance Scale. Methods: A group of forty-five subjects with stroke (Berg Balance Scale score${\geq}46$ were twenty-eight, Berg Balance Scale score${\leq}45$ were seventeen) were enrolled in this study. Subjects were asked to perform the Timed Up and Go test. Testing indications included two directions for turning in each subject. These indications were for turning toward the affected and unaffected side in stroke patients. The duration of total analysis duration, sit to stand phase, stand to sit phase, mid-turning phase, and end turning phase were recorded. The obtained data were analyzed by using paired t-test and Wilcoxon signed rank test in the group that are below and above 45 points of Berg Balance Scale score. The significance level was set at ${\alpha}=.05$. Results: There were significant increase time in the analysis duration and end turning phase duration while subjects were turned the unaffected side in stroke patients that presented a Berg Balance Scale score${\leq}45$ (p<.05). However, the comparison between the affected side and the unaffected side in the stroke patients with Berg Balance Scale score${\geq}46$, revealed no significant differences of the measured parameters. Conclusion: This finding should be suggested in the specific definition of turning direction for evaluation with Timed Up and Go test in the Berg Balance Scale score${\leq}45$, and other intervention for hemiplegic patients need to be suggested the direction of turning during walking training program.

Z시험에 의한 선회권의 작도법에 관한 연구 (A Study on the Method of Turning Circle Drawing by Z-test)

  • 오정철
    • 한국항해학회지
    • /
    • 제7권1호
    • /
    • pp.33-62
    • /
    • 1983
  • A navigator on bridge needs to know every kinds of motion characteristics of his vessel at sea. Generally when a vessel is completely built, the shipyard makes turning circle diagrams from the results of turing circle tests made during the sea trials for the reference of the vessel's owner. But referring only the data of a turning circle diagram, an officer on bridge can not figure out his vessel's maneuvering characteristics sufficiently, So nowadays the shipyard often adds Z test to turning circle test for more detail references. In this paper the author made Z and turning circle tests at the rudder angles of 15 and and 35 degress separately and in each of the case made a turrning circle diagram from the results of the turning circle test and the esults numerically calculated from mathematical formula made on the base of the maneuvering indices got from the Z test and compared them each other for the purpose of finding the correlations between them. Followings are concluded from the results. An actual turning circle diagram and a calculated one from the results of the Z test at same rudder angle coincides each other well when the center of the calculated circle is transferred by 1.7B toward the direction of the initial turning perpendicularly to the original course and 0.5L toward the direction in parallel with original course in case of the rudder angle of 35 degrees and 1.2B and 0.3L toward each of the above mentioned directions in case of rudder angle of 15 degrees.

  • PDF

Effect of Load Condition on Turning Performance of a VLCC in Adverse Weather Conditions

  • Zaky, Mochammad;Yasukawa, Hironori
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제4권2호
    • /
    • pp.53-65
    • /
    • 2018
  • The load condition significantly influences ship maneuverability in calm water. In this research, the effect of the load condition on turning performance of a very large crude oil carrier (VLCC) sailing in adverse weather conditions is investigated by an MMG-based maneuvering simulation method. The relative drift direction of the ship in turning to the wave direction is $20^{\circ}-30^{\circ}$ in ballast load condition (NB) and full load condition (DF) with a rudder angle $35^{\circ}$ and almost constant for any wind (wave) directions. The drifting displacement in turning under NB becomes larger than that under DF at the same environmental condition. Advance $A_d$ and tactical diameter $D_t$ become significantly small with an increasing Beaufort scale in head wind and waves when approaching, although $A_d$ and $D_t$ are almost constant in following wind and waves. In beam wind and waves, the tendency depends on the plus and minus of the rudder angle.

트럼펫 IC 램프의 운전조건과 교통사고 분석 (Analysis of Driving Conditions and Traffic Accidents in the Case of Trumpet Interchange Ramps)

  • 김태영;박병호
    • 대한교통학회지
    • /
    • 제25권1호
    • /
    • pp.73-79
    • /
    • 2007
  • 본 연구는 트럼펫 IC 램프의 교통사고를 다룬다. 연구의 목적은 회전방향(그리고 기하구조 요소와의 조합)에 따른 교통사고와의 관계를 분석하는데 있다. 이를 위해 본 연구에서는 트럼펫 IC 연결로의 회전방향과 종단경사와의 조합 및 회전방향과 곡선반경과의 조합에 따른 교통사고와의 관계분석에 중점을 둔다. 귀무가설을 검정한 결과 트럼펫 IC 연결로 회전방향에 따른 평균사고율과 평균사고건수는 각각 신뢰수준 90%와 95%신뢰수준에서 기각되었다 또한 트럼펫 IC 연결로 회전방향-종단경사의 조합과 회전방향-곡선반경의 조합에서도 평균사고건수와 평균사고율은 모두 95%신뢰수준에서 기각되었다. 요약하면, 우회전 이동류가 좌회전에 비해 더 위험한 것으로 분석된다. 또한 우회전-상향 램프와 좌회전-곡선반경 200이상 램프가 타 램프에 비해 교통사고 잠재력이 더 높은 것으로 분석된다.

사용 편의성 향상을 위한 선풍기의 효율적 회전구간 선정 (User-friendly adjustable table fan with selective rotation angles)

  • 김상현
    • 문화기술의 융합
    • /
    • 제8권2호
    • /
    • pp.53-58
    • /
    • 2022
  • 일반적인 가정용 선풍기는 단 하나의 좌우 회전 구간을 갖기 때문에 회전 각도를 조절할 수 없어 불필요한 영역까지 바람이 가거나 바람이 필요한 공간에 바람이 가지 않는 구간이 발생한다. 본 논문에서는 에너지 낭비를 줄이면서 필요한 공간에 선택적으로 바람을 보낼 수 있도록 회전 구간을 효율적으로 조절하는 방법을 제시하고자 한다. 정지 풍향각 측정 실험을 통해 최소 회전 각도를 구하였으며 최적의 회전 단계수를 선정하기 위해 바람이 도달하는 공간을 적절히 분할하였다. 이를 통해 선풍기가 45°의 최소 회전 각도와 3단계의 회전 구간을 가지면서 각 단계마다 정지 풍향각의 2배씩 회전 각도가 증가할 때 바람이 효율적으로 분배되는 것을 확인하였다. 따라서 본 논문에서 제시한 선택적 회전 구간 조절 방법은 선풍기 구조에 큰 변형 없이 에너지 낭비를 최소화 할 수 있을 것으로 사료된다.

Directing the turning behavior of carp using virtual stimulation

  • Kim, Cheol-Hu;Kim, Dae-Gun;Kim, Daesoo;Lee, Phill-Seung
    • Ocean Systems Engineering
    • /
    • 제7권1호
    • /
    • pp.39-51
    • /
    • 2017
  • Fishes detect various sensory stimuli, which may be used to direct their behavior. Especially, the visual and water flow detection information are critical for locating prey, predators, and school formation. In this study, we examined the specific role of these two different type of stimulation (vision and vibration) during the obstacle avoidance behavior of carp, Cyprinus carpio. When a visual obstacle was presented, the carp efficiently turned and swam away in the opposite direction. In contrast, vibration stimulation of the left or right side with a vibrator did not induce strong turning behavior. The vibrator only regulated the direction of turning when presented in combination with the visual obstacle. Our results provide first evidence on the innate capacity that dynamically coordinates visual and vibration signals in fish and give insights on the novel modulation method of fish behavior without training.

신침로거리와 전타시점에 관한 연구 (A Study on the New Course Distance and the proper time to alter course)

  • 김민석
    • 수산해양교육연구
    • /
    • 제21권4호
    • /
    • pp.586-591
    • /
    • 2009
  • The marine traffic accidents go on increasing owing to the increment of marine traffic capacity, and the solutions about these matters are vigorously considering by many researchers. When the watch officer navigates to the narrow channel, bend or an area obscured by an intervening obstruction and around the harbour limit he must follow the planned track. The watch officer can safely navigate along the course laid down only when he alters his course in advance before the new course distance earlier than the course alternation point. If we call this point to be changed in advance a turning bearing, the turning bearing is decided according to the direction and the range from the clearing objects. The turning bearing helps the watch officer to determine whether the ship is at wheel-over position or not. The author in this paper suggest how to make and use a curve graph which is decided according to the direction and the distance from the clearing objects. If the watch officer utilize this curve graph he can judge swiftly and precisely whether his ship is at the wheel - over position or not.

수직형 선반의 평면 오차 민감도 분석 및 신뢰도 평가 (Sensitivity Analysis and Confidence Evaluation for Planar Errors of a Vertical Turning Center)

  • 여규환;양승환
    • 한국정밀공학회지
    • /
    • 제15권11호
    • /
    • pp.67-75
    • /
    • 1998
  • Geometric and thermal errors are key contributors to the errors of a computer numerically controlled turning center. A planar error synthesis model is obtained by synthesizing 11 geometric and thermal error components of a turning center with homogeneous coordinate transformation method. This paper shows the sensitivity analysis on the temperature change, the confidence evaluation on the uncertainty Of measurement systems, and the error contribution analysis from the planar error synthesis model. Planar error in the z direction was very sensitive to the temperature change. and planar errors in the x and z directions were not affected by the uncertainty of measurement systems. The error contribution analysis ,which is applicable to designing a new turning center, was helpful to find the large error components which affect planar errors of the turning center.

  • PDF