• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.109-114
• /
• 2021

Cr(VI)-quinoline compound[(C₉H₇NH)₂Cr₂O₇] was synthesized by the reaction between of quinoline and chromium(VI) trioxide, and structure was FT-IR, elemental analysis. The oxidation ability of benzyl alcohol greatly depends upon the dielectric constant of the used organic solvent, where carbon tetrachloride was worst and N,N'-dimethylformamide was best solvent. Noticeably, in N,N'-dimethylformamide solvent, Cr(VI)-quinoline compound oxidized substituted benzyl alcohols. The Hammett reaction constant(ρ)=-0.69(303K). As a resuit, Cr(VI)-quinoline compound was found as efficicent oxidizing agent that converted benzyl alcohol, allyl alcohol, primary alcohol and secondary alcohols to the corresponding aldehydes or ketones. Cr(VI)-quinoline compound was selective oxidizing agent of benzyl alcohol, allyl alcohol and primary alcohol in the presence of secondary alcohol ones.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.04a
• /
• pp.84-87
• /
• 1996

• 월간산업보건
• /
• s.311
• /
• pp.61-63
• /
• 2014

• Bulletin of the Korean Chemical Society
• /
• v.20 no.11
• /
• pp.1255-1256
• /
• 1999

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1177-1180
• /
• 2003

Thallium is quantitatively retained by 1,10-phenanthroline and tetraphenylborate onto benzophenone in the pH range 0-11 from a large volumes of aqueous solutions of various samples. After filtration, the solid mass consisting of thallium complex and benzophenone is dissolved with 5 mL of dimethylformamide and the metal was determined by flame atomic absorption spectrometric. About 0.4 ㎍ of thallium can be concentrated from 400 mL of aqueous sample, where its concentration is as low as 1.0 ng/mL. Eight replicate determinations of 8.0 ㎍/mL of thallium in final dimethylformamide solution gave a mean absorbance of 0.160 with a relative standard deviation of 1.7%. The sensitivity for 1% absorption was 0.22 ㎍/mL. The interference of a large number of anions and cations has been studied and the optimized conditions developed were utilized for the trace determination of thallium in various alloys and biological samples.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.186-192
• /
• 1996

The effects of chemical modification on the enzymes' stability in polar organic solvents were studied with subtilisin Carlsberg in dimethylformamide-water mixtures as a model system. Three out of nine lysine residues of subtilisin Carlsberg were coupled to either trimellilic or pyromellitic anhydrides thereby, for each lysine residue modified, resulting in the net replacement of one basic amino group by two or three acidic carboxyl groups, respectively. In water at 60$^{\circ}C$, both trimellitic and pyromellitic anhydride-modified subtilisin Carlsberg showed increased thermostability by 2.6 times and 1.6 times, respectively, as compared to that of unmodified enzyme. In 70% dimethylformamide at 25$^{\circ}C$, however, only pyromellitic acrid was shown to enhance the stability of subtilisin Carlsberg by 5.5 times increasing the half life time of irreversible inactivation from 4.9hr for unmodified enzyme to 27.8hr for modified enzyme.

• Archives of Pharmacal Research
• /
• v.15 no.1
• /
• pp.69-72
• /
• 1992

Pyrimidine bases and their mucleosides were oxidatively iodinated at C-5 position by the reaction of iodine in DMF (dimethylformamide) with MCPBA (m-chloroperbenzoic acid) under mild conditions. For uracil derivatives such as uracil 1a. 1, 3-dimethyluracil 1b, uridine 1c, and 2'-deoxyuridine 1d, the corresponding 5-iodo derivatives were obtained in high yields (71-95%). The iodination of cytidine 3a and 2'-deoxycytidine 3b was achieved in moderate yields (41-56%).

• Bulletin of the Korean Chemical Society
• /
• v.25 no.9
• /
• pp.1403-1407
• /
• 2004

Dielectric relaxation measurements on 3-nitrotoluene (3-NT) mixture of dimethylacetamide (DMA), dimethylformamide (DMF) and dimethysulphoxide (DMSO) have been carried out across the entire concentration range using Time domain reflectometry technique at 15, 25, 35 and $45^{\circ}C$ over the frequency range from 10 MHz to 20 GHz. For all the mixtures, only one dielectric loss peak was observed in this frequency range and the relaxation in these mixtures can be well described by a single relaxation time using Debye model. Bilinear calibration method is used to obtain complex permittivity ${\varepsilon}^{*}({\omega})$ from complex reflection coefficient ${\rho}^{*}({\omega})$ over frequency range 10 MHz to 20 GHz. The excess permittivity, excess inverse relaxation time, Kirkwood correlation factor, molar energy of activation are also calculated for these mixtures to study the solute-solvent interaction.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.6
• /
• pp.290-295
• /
• 2020

In this study, Electro spinning was carried out using Cabon nanotube 0.1%-Polyacrylonitrile 3%-Dimethylformamide 17% agitation solution. It was investigated the solute and solvent correlations according to the electro spinning voltages ranging form 5 to 40 kV, based on the SEM image. Except voltage 25 kV, electro spinning was failed due to the lack of electro spinning (less than 60%). Voltage 25 kV was showed excellent properties, and was confirmed Cabon nanotube 58.1 nm and diameter of Cabon nanotube + Polyacrylonitrile 1.76 ㎛ as shown SEM image. Also, the tensile test results were showed that SK Chemical prepreg electro spinning angle of 0 and 90 degrees were 137 MPa and 60 MPa, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.5
• /
• pp.496-500
• /
• 1997

Electrochemical behavior of mer-tris(2-pyridinethiolato)cobalt(Ⅲ) in dimethylformamide was studied on a platinum electrode by means of cyclic voltammetry, chronoamperometry, and chronocoulometry. It was found that the neutral complex molecule was electroactive between the potential region of 1.0 and - 1.2 V vs. a nonaqueous Ag/Ag+ electrode. The Co(Ⅲ) complex was reversibly reduced to Co(Ⅱ) species by one-electron transfer at about - 1.1 V, followed by an irreversible dissociation reaction. However, the oxidation process at around 0.8 V, was responsible for an irreversible two-electron transfer that occurred at a ligand site.