• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.39-46
• /
• 2005

This paper use virtual running after possible traffic capacity application for optimal route location. General road is designed the design after we examine an alternate adequacy investigation and an execution design sufficiently. Various road user's requirement must be reflected from the beginning. But it is difficult to contain the various suitable design criteria because we consider the existing 2-dimension element. First of all, this study chose optimal route, used traffic assignment and 3D simulation. Then selected optimal route through the consistent road construction by analyzing road driving simulation of 3-dimension data and the urban landscape. possible traffic capacity and virtual running will be able to do the urban landscape analysis harmonizing with the environment; equally, it could be objectively solve the problem of a civil appeal.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.143-155
• /
• 2009

A dynamic traffic assignment (DTA) has recently been implemented in many practical projects. The core of dynamic model is the inclusion of time scale. If excluding the time dimension from a DTA model, the framework of a DTA model is similar to that of static model. Similar to static model, with given exogenous travel demand, a DTA model loads vehicles on the network and finds an optimal solution satisfying a pre-defined route choice rule. In most DTA models, the departure pattern of given travel demand is predefined and assumed as a fixed pattern, although the departure pattern of driver is changeable depending on a network traffic condition. Especially, for morning peak commute where most drivers have their preferred arrival time, the departure time, therefore, should be modeled as an endogenous variable. In this paper, the authors point out some shortcomings of current DTA model and propose an alternative approach which could overcome the shortcomings of current DTA model. The authors substitute a traditional definition for time-dependent OD table by a new definition in which the time-dependent OD table is defined as arrival time-based one. In addition, the authors develop a new DTA model which is capable of finding an equilibrium departure pattern without the use of schedule delay functions. Three types of objective function for a new DTA framework are proposed, and the solution algorithms for the three objective functions are also explained.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.605-610
• /
• 2013

A cryptography for enforcing hierarchic groups in a system where hierarchy is represented by a partially ordered set was introduced by Akl et al. But the key generation algorithm of Akl et al. is infeasible when there is a large number of users. To overcome this shortage, in 1985, MacKinnon et al. proposed a paper containing a condition which prevents cooperative attacks and optimizes the assignment. In 2005, Kim et al. proposed the key management systems for using one-way hash function, RSA algorithm, poset dimension and Clifford semigroup in the context of modern cryptography, the key management system using Clifford semigroup of imaginary quadratic non-maximal orders. We, in this paper, show that Kim et al. cryptosystem is insecure in some reasons and propose a revised cryptosystem.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.325-332
• /
• 2016

Configuring excavator attachments and engine sizes is the prerequisite for appropriate excavator assignment. Existing experience based configuration practice is lack of scientific rational because many variables (e.g., equipment motion data, soil and rock type and condition, equipment's engineering dimension along with bucket properties, job and management conditions etc.) should be considered simultaneously and timely fashion. This paper presents a new excavator configuration searching method that identifies the most favorable excavator configuration (i.e., the optimal set of excavator's maximum digging height and bucket size) to complement these existing practices. The method coded by using MATLAB identifies an optimal excavator configuration by considering those variables causing the variability of productivity. A case study is presented to demonstrate and to verify the system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.708-714
• /
• 2000

In this paper, an one-dimensional VLSI array for high speed processing of fractal image compression algorithm based the quad-tree partitioning method is proposed. First of all, the single assignment code algorithm is derived from the sequential Fisher's algorithm, and then the data dependence graph(DG) is obtained. The two-dimension array is designed by projecting this DG along the optimal direction and the one-dimensional VLSI array is designed by transforming the obtained two-dimensional array. The number of Input/Output pins in the designed one-dimensional array can be reduced and the architecture of process elements(PEs) can he simplified by sharing the input pins of range and domain blocks and internal arithmetic units of PEs. Also, the utilization of PEs can be increased by reusing PEs for operations to the each block-size. For fractal image compression of 512X512gray-scale image, the proposed array can be processed fastly about 67 times more than sequential algorithm. The operations of the proposed one-dimensional VLSI array are verified by the computer simulation.

• Journal of the Korean Society of School Health
• /
• v.22 no.2
• /
• pp.157-167
• /
• 2009

Purpose : The purpose of this study is to explore the students injuries by analyzing the data which has been inputted by the emergency center of the cooperated hospitals and the 119 rescue party through the injury surveillance system in Cheonan city. Method : Students were divided into the elementary, middle, high school students with the 776 cases of children and teenagers(7-19years old) of injury surveillance system in Cheonan area from january to june in 2009. Frequency analysis and $x^2$-test was done to recognize the features of students injuries among the groups. The program to be used for the statistical analysis is SPSS 17.0. Result : Out of the injury incidence rate, the elementary school students(52.1%) are first, the high school students (24.9%) are second, the middle school students appear to be 23.1%. Male is about two times higher than female by 66.6% in the injury incidence. In terms of the injury mechanism, the injury(22.2%) by hit is the first, the traffic accident(21.5%) is the second, the slippery(16.8%) is followed. The injuries were occurred most largely at 16:00-20:00(33.4%), and the 33.6% of injury by daily leisure activity occurs at 16:00-20:00 chiefly. Conclusion : Analysis using the data of the injury surveillance system has some advantages compared to the previous research such as reliability and specification. To prevent the students injuries, not the individual problem but the social dimension should be acknowledged so that we can secure and promote the safety from the risk. Therefore, we must organize the role assignment and the cooperative network in the school, home and community.

• Journal of Contemporary Eastern Asia
• /
• v.17 no.2
• /
• pp.176-198
• /
• 2018

Environmental issues are among the most critical issues nowadays. These issues are no longer confined to individual countries, and international society has been progressing in building global dialogues since the early 1970s. Within these international efforts, Germany and Japan have played essential roles in global environmental governance. However, there are major differences in nation-level environmental policies in both countries. Governance based on network structure is more efficient than that based on hierarchy for solving complex problems. The network structure is formed through horizontal cooperation among various autonomous actors, and the relationship intensity among actors is one of the key concepts in the governance. Using social network analysis as a framework to explain complicated societal structures explains how interaction among actors creates networks, and these networks further affect their interactions. The purpose of this study is to investigate the structure of environmental policy governance as collaborative governance in Germany and Japan. To address this goal, this paper analyzes the relationship between the informational dimension of governance networks and its complement resource-sharing networks in both countries. The results show that the information-sharing networks have lower-level network influence on the resource-sharing networks as higher-level networks even if not all of the information factors have singular influences. The results suggest that the information-sharing networks may be one of the pieces of the puzzle for explaining this phenomenon in environmental governance in Germany and Japan.

• Genomics & Informatics
• /
• v.21 no.3
• /
• pp.40.1-40.11
• /
• 2023

Microbial community profiling using 16S rRNA amplicon sequencing allows for taxonomic characterization of diverse microorganisms. While amplicon sequence variant (ASV) methods are increasingly favored for their fine-grained resolution of sequence variants, they often discard substantial portions of sequencing reads during quality control, particularly in datasets with large number samples. We present a streamlined pipeline that integrates FastP for read trimming, HmmUFOtu for operational taxonomic units (OTU) clustering, Vsearch for chimera checking, and Kraken2 for taxonomic assignment. To assess the pipeline's performance, we reprocessed two published stool datasets of normal Korean populations: one with 890 and the other with 1,462 independent samples. In the first dataset, HmmUFOtu retained 93.2% of over 104 million read pairs after quality trimming, discarding chimeric or unclassifiable reads, while DADA2, a commonly used ASV method, retained only 44.6% of the reads. Nonetheless, both methods yielded qualitatively similar β-diversity plots. For the second dataset, HmmUFOtu retained 89.2% of read pairs, while DADA2 retained a mere 18.4% of the reads. HmmUFOtu, being a closed-reference clustering method, facilitates merging separately processed datasets, with shared OTUs between the two datasets exhibiting a correlation coefficient of 0.92 in total abundance (log scale). While the first two dimensions of the β-diversity plot exhibited a cohesive mixture of the two datasets, the third dimension revealed the presence of a batch effect. Our comparative evaluation of ASV and OTU methods within this streamlined pipeline provides valuable insights into their performance when processing large-scale microbial 16S rRNA amplicon sequencing data. The strengths of HmmUFOtu and its potential for dataset merging are highlighted.

• Archives of design research
• /
• v.1 no.1
• /
• pp.1-162
• /
• 1980

The Design Society of Korea. It is our urgent task that we should map out our detailed guiedlines for the improvement of export-oriented industries and of the design of export goods in preparation for our export goal of $30 billion in the upcoming 1980s. The government, university design researchers, and most entrepreneurs have confronted diverse kinds of racking issues: how much do most export industries take advantage of the indus-trial design for the improvement of the quality of export goods\ulcorner, structural defects of most export industries, chronic and vicious cycle of overlooking the value of the industrial design in the process of manufacturing export goods and etc. In other words, the recent trend of slighting the industrial design is to speed up the sales of only unsophisticated goods on the international markets. Although Koreans have been plagued by scantiness of natural resources under these circumstances, most Korean people have showed off their strong will for today's growth. Furthermore, most exporters should do their best to sweep overseas markets by manufacturing sophisticated goods outranking those commodi-ties made by the United States, Japan, West Germany and the other developed countries. In this respect, we have to make our best efforts for the expensive application and practical use of the industrial design, one of the comprehensive sciences, in the face of the hard realities and conditions which we have confronted until now. For example, it can be attributed to the practical application of the industrial design that the neighboring Japan, West Germany, France, the United Kingdom in Europe, and the United States in North America have formulated a highly advan-ced cultural zone and braced up for their own trade protection-ism and tightened their embargoes on EEC goods. Unless any export goods take the best advantage of the industrial design, one of the behavioral sciences capable of satisfying the material mental needs of modern men and of promoting cultural growth, I am convinced that they will not infiltrate into any countries that have enjoyed their own highly cultural lives. It is absolutely important that most Korean universities, state-run, private corporations and research institutes should work out the improvement strategy for the development and practical use of the industrial design as will as the revision of the present curricula of the departments of design. However, most design researchers have come to grips with several difficult problems such as the correlation of export oriented industries and the industrial design and the development of the design of export goods. The improvement of the industrial design is our urgent assignment that we have to solve in the 1980s. Accordimgly, I cannot too much emphasize the value the recognition of the industrial design in our industrial communities because we have never witnessed the prosperity of those countries which have taken little notice of the importance of the industrial design. Hopefully, most entrepreneurs will take much consideration of the value of the industrial design and then can defeat their rival businessmen on the international markets by exporting goods of highly sophisticated design. In this respect, the main purpose of the research paper which this society presented is to underline the fact that the improvement and development of the industrial design is our common assignment to be studied from the viewpoints of national dimension as well as in conformity with our immediate goal for the export-oriented prosperity of state. In conclusion, I would like to highlight the fact that our export goods shall be continually developed in pace with the correlative improvement of the indudtrial design so as to pave the way for their bright prospect and to enhance their best impression of the first-class goods on the international markets.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.3 s.303
• /
• pp.81-90
• /
• 2005

When we transmit signals, which are quantized by the vector quantizer (VQ), through noisy channels, the overall performance of the coding system is very dependent on the employed quantization scheme and the channel error effect. In order to design an optimal coding system, the source and channel coding scheme should be jointly optimized as in the channel-optimized VQ. As a suboptimal approach, we may consider the robust VQ (RVQ). In RVQ, we consider developing an index assignment function for mapping the output of quantizers to channel symbols so that the effect of the channel errors is minimized. Recently, a VQ, which can reduce the encoding complexity and is called the sample-adaptive product quantizer (SAPQ), has been proposed. SAPQ has very similar quantizer structure as to the product quantizer (PQ). However, the quantization performance can be better than PQ. Further, the encoding complexity and the memory requirement for the codebooks are lower than the regular full-search VQ case. In this paper, SAPQ is employed in order to design an RVQ to channel errors by reducing the vector dimension. Discussions on the codebook structure of SAPQ and experiments are introduced in an aspect of robustness to noisy channels.