• 대한화학회지
• /
• 제29권3호
• /
• pp.233-238
• /
• 1985

비다공성 및 다공성 폴리스티렌 디비닐벤젠 공중합체를 합성하고, 이것을 클로로메틸화 한후, 메틸아민으로 아미노화하여 약염기성 음이온교환수지인, 50∼100mesh의 비다공성, N-APSTDVB와 다공성, P-APSTDVB를 만들었다. 합성한 이들 음이온교환수지를 적외선 흡수스펙트럼으로 확인하였다. 이들 음이온교환수지의 최대 이온교환용량은 4.86meq/g이었다. 다공성 폴리스티렌 디비닐벤젠 공중합체, P-APSTDVB의 세공용적은, 디비닐벤젠의 볼륨퍼센트를 30%로 하였을 때, X$_{diluent}$의 증가에 따라서 증가하였다. 또한 X$_{diluent}$의 양을 0.5로 일정하게 하였을때, P-APSTDVB공중합체의 세공용적은, 디비닐벤젠의 볼륨퍼센트가 증가함에 따라 증가하였다. 디비닐벤젠의 퍼센트를 8%로 일정하게 하고, X$_{heptane}$을 0.5로 하였을 때, 합성한 공중합체와 음이온교환수지의 세공용적은, P-PSTDVB >P-APSTDVB >N-PSTDVB순으로 감소하였다. 여러 농도하에서의, 여러종류의 알코올 수용액중에서의 N-APSTDVB음이온교환수지에 대한 붕산의 분포계수가, 또한 논의되었다.

• 공업화학
• /
• 제9권5호
• /
• pp.680-688
• /
• 1998

친수성 단량체 glycidylmethacrylate (GMA)에 가교제인 divinylbenzene (DVB)과 세공형성제인 2,2,4-trimethylpentane (TMP)량을 각각 0~10 mol %과 0~100 vol %로 변화시켜 현탁중합법으로 macroreticular (MR)형 GMA-DVB 공중합체 (RG라 칭함)을 합성하였다. 이들 공중합체를 벤젠 존재하에서 인산으로 인산화시켜 인산기를 갖는 거대망상형 양이온 교환수지 (macroreticular type cation exchange resins containing phosphoric acid groups, RGP)을 제조하였으며, 이들 수지에 대한 물성과 우라늄의 흡착능을 고찰하였다. RGP수지들의 물성은 합성시 가교도와 희석제량에 따라 영향이 있었으며, 우라늄의 흡착능은 가교도 영향인 경우 $$RGP-10(50){\sim_=}RGP-1(50)>RGP-2(50)>RGP-5(50)>RGP-0(50)$$ 이며, 희석제량의 영향인 경우는 RGP-2(100)>RGP-2(75)>RGP-2(50)>RGP-2(30)>RGP-2(0)순이였다. RGP수지들의 물성과 우라늄의 흡착능에서 가교도의 영향인 경우 RGP 수지의 세공구조, 양이온 교환 용량 및 팽윤비에 의존하며, 희석제량의 영향인 경우는 양이온 교환 용량보다도 비표면적과 세공구조에 더 영향이 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.87-90
• /
• 2014

The effects of electric field frequency on the ac electrical treeing phenomena in an epoxy/reactive diluent/layered silicate (1.5 wt%) were carried out, in needle-plate electrode arrangement. A layered silicate was exfoliated in an epoxy base resin, by using our ac electric field apparatus. To measure the treeing propagation rate, constant alternating current (AC) of 10 kV with three different electric field frequencies (60, 500 and 1,000 Hz) was applied to the specimen, in needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. As the electric field frequency increased, the treeing propagation rate increased. At 500 Hz, the treeing propagation rate of the epoxy/PG/nanosilicate system was $0.41{\times}10^{-3}$ mm/min, which was 3.4 times slower than that of the epoxy/PG system. The electrical treeing morphology was dense bush type at 60 Hz; however, as the frequency increased, the bush type was changed to branch type, having few branches, with very slow propagation rate.

• Transactions on Electrical and Electronic Materials
• /
• 제14권6호
• /
• pp.317-320
• /
• 2013

Partial discharge resistance for the epoxy systems with two diluents was investigated in the rod-plane electrodes arrangement, and the effect of electric frequency on the partial discharge resistance was also studied. Diglycidyl ether of bisphenol A (DGEBA) type epoxy was used as a base resin, and 1,4-butanediol diglycidyl ether (BDGE) or polyglycol (PG) as a reactive diluent was introduced to the DGEBA system, in order to decrease the viscosity of the DGEBA epoxy system. BDGE was acted as a chain extender, and PG acted as a flexibilizer, after the curing reaction. To measure the partial discharge resistance, 5 kV alternating current (ac) with three different frequencies (60, 500 and 1,000 Hz) was applied to the specimen in a rod-plane electrode arrangement, at $30^{\circ}C$. PG had a good effect, while BDGE had a bad effect on the partial discharge resistance of the DGEBA system, regardless of the electric frequency.

• Journal of Pharmaceutical Investigation
• /
• 제32권2호
• /
• pp.95-101
• /
• 2002

Matrix tablets of nifedipine (NP) were prepared with Eudragit, diluent (lactose or Ca. phosphate) and Mg. stearate employing two different preparation methods (wet granulation and direct compression) to develop its sustained-release dosage forms. The effects of various formulation factors on the dissolution rate of the drug were investigated. Dissolution test was studied in pH 6.8 phosphate buffer containing 1% sodium lauryl sulfate using the paddle method. Formulation factors were the type and content of Eudragit, the type of diluent and the tablet preparation method. The optimum formula of NP matrix tablet, which resulted in a similar dissolution profile to that from Adalat Oros used as a reference, was 30 mg NP, 10% Eudragit RS, 2% Mg. stearate and an adequate quantity of lactose to yield 500 mg weight using the wet granulation method.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.90-96
• /
• 2001

Catalytic ignition of $H_2/O_2/CO_2$ mixtures over platinum catalyst is experimentally investigated by using microcalorimetry. For comparison, $N_2$ and Ar is also used as diluent gas. The gas mixture flows toward platinum foil heated by electric current at atmosphere pressure and ambient temperature. The ignition temperature range 350-445K according to the fuel ratio, dilution ratio and diluent gas. It increases as the fuel ratio and dilution ratio increase. $H_2/O_2$ mixture with $CO_2$ ignites at higher temperature than with other diluents by 30-50K. Several experimental evidences show the inhibition effects of $CO_2$ in $H_2-O_2$ heterogeneous reaction is considerable

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.171-175
• /
• 1998

$Al_2O_3$-TiC composites were prepared from aluminum, titanium oxide, and carbon fibers by self-propagating high-temperature synthesis(SHS). After the SHS reaction, the TiC phase in the sample was found either fibrous or non-fibrous shape. The fraction of the fibrous TiC phase varied with the amount of $Al_2O_3$ diluent addition. The optimum amount of diluent to make fibrous carbide was determined to be 30%. The fibers were hollow inside and made of multiple grains with a composition of titanium carbide. The hollow fiber formation mechanism was suggested and discussed. The synthesized powders were consolidated to dense composites by hot pressing at $1750^{\circ}C$ under 30 MPa.

• Journal of Biosystems Engineering
• /
• 제21권2호
• /
• pp.155-166
• /
• 1996

A direct injection sprayer was designed using the concepts of injection mixing and total flow control, flowrate-based system compensating for the variation of forwarding speed. A metered rate, proportionally to the actual diluent flow rate, of a tracer chemical was injected directly into the diluent stream. The injection of chemical may improve the precision and safety of chemical application process. The control system was evaluated for the variables of the control interval, tolerances and sensitivities of flow regulation valve and injection pump. Performance of the system was assessed as that the response time of flow rate, response time of injection rate, absolute steady state error, and the coefficient of variance(C.V.) of concentration were 8.5 and -0.53 seconds, 0.067 lpm(0.8%) and 3.15%, respectively, at optimal parameters of control interval of 1.0 sec, fast sensitivity of flow regulation valve, medium sensitivity of injection pump and medium tolerance of flow rate. Performance of the system can be improved by increasing the sensitivity of flow regulating valve and employing a high resolution velocimeter, such as Doppler radar.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.500-510
• /
• 1996

A Direct injection -mixing total -flow -control sprayer was developed and evaluated . The system provided precise application rates and minimized operator exposure to chemicals as well as providing a possibility for recycling container so f unused chemicals that can causes environmental contamination. Chemicals were metered and injected proportionally to the diluent flow rate to provide constant concentrations. The main diluent flow was varied in response to changes in travel speed. Experimental variables of the sprayer were the control interval, the sensitivity of flow regulating valve, the tolerance of control object and the sensitivity of the injection pump system. The optimal performance of the flow control system was with an average response time of 8.5 sec at an absolute steady state of error of 0.067 L/min (0.8% of flow rate). The average response time of the injection rate was -0.53 sec and the coefficient of variation (CV) of concentration was 3.2%.

• 한국수정란이식학회지
• /
• 제4권1호
• /
• pp.35-40
• /
• 1989

The effects of cryoprotectants (glycerol, DMSO and ethylene glycol) and the concentrations (0, 0, 25, 0.5and 1.0 M) of sucrose in the diluent on the is vitro survival of mouse morulae froaen rapidly in liquid nitrogenvapour were examined. When the embryos were equilibrated in 1.5 M cryoprotectants +0.25 M sucrose in one-step or in 3.0 M cryoprotectants +0.25 sucrose in two-step and diluted with 0, 0.25, 0.5, or 1.0 M sucrose solution after thawing, high survival rates were obtained in ethylene glycol (48.0% to 88.2 %) or in glycerol (35.0 % to 77.8 %). These results show that 1.5 M ethylene glycol is a highly efficient cryoprotective agent for the rapid freezing of mouse morula embryos and 0.5 M sucrose was optimal concentration in the diluent after thawing.