• 제목/요약/키워드: digital thermometer

검색결과 56건 처리시간 0.024초

가축에서 간이 체온측정 비접촉성 체온계 개발을 위한 임상적 연구 (Clinical Studies for the Development of Non-contact Thermometer to Take Easily the Body Temperature of Domestic Animals)

  • 김용준;이대영;한경호
    • 한국임상수의학회지
    • /
    • 제20권3호
    • /
    • pp.357-363
    • /
    • 2003
  • These studies were carried out to develop non-contact thermometer to take easily the body temperature of domestic animals instead of taking rectal temperature. For the studies, 86 cattle, 57 horses, 72 pigs, 43 goats, and 42 dogs were used and body parts as neck, flank, axilla, lateral abdomen, gluteus, inguinal region, or jugular groove were chosen for taking temperature according to different species. Two types of commercial non-contact thermometers were used to take the temperature of certain body part and at the same time the rectal temperature using digital thermo-meter was taken to compare the difference of temperature between rectum and certain body part. The difference of mean temperature in cattle between rectum and axilla and flank were 0.52 and $2.41^{\circ}C$, respectively, using non-contact thermometer I, whereas $3.02^{\circ}C$ between rectum and flank using thermometer II. The difference of mean temperature in horses between rectum and axilla, gluteus, and jugular groove were 0.52, 1.49, and $0.26^{\circ}C$, respectively, using thermometer I, whereas 2.28 ane $0.92^{\circ}C$ between rectum and gluteus or jugular groove using thermometer II. The difference of mean temperature in swine between rectum and flank, inguinal region, and neck were 1.23, 0.21, and $0.8^{\circ}C$, respectively, using thermometer I, whereas 1.42, 0.711, and $1.25^{\circ}C$ using thermometer II The difference of mean temperature in goats between rectum and lateral abdomen and inguinal region were 1.02 and $0.12^{\circ}C$, respectively, using thermometer I, whereas 1.96 and $1.01^{\circ}C$ using thermometer II. The difference of mean temperature in dogs between rectum and lateral abdomen, inguinal region, and neck were 3.26, 0.24, and $2.37^{\circ}C$, respectively, using thermometer I, whereas 3.45, 0.56, and $2.61^{\circ}C$ using thermometer II.

저면적 디지털 제어 발진기의 양자화 에러 최소화를 위한 추가 서모미터 코드 잠금 기법 (Additional Thermometer Code Locking Technique for Minimizing Quantization Error in Low Area Digital Controlled Oscillators)

  • 강병석;김영식;김신웅
    • 전기전자학회논문지
    • /
    • 제27권4호
    • /
    • pp.573-578
    • /
    • 2023
  • 본 논문에서는 고성능 디지털 위상 고정 루프(DPLL)에 적용 가능한 새로운 잠금 기법을 소개한다. 이 연구는 LC 기반 디지털 제어 발진기(DCO)에서 발생하는 양자화 오류를 줄이기 위해 추가 서모미터 코드를 사용한다. 본 방식은 전체 DCO 코드를 서모미터 방식으로 구현하지 않음에도 불구하고 높은 선형성을 통해 양자화 오류를 감소시킨다. 초기 잠금 단계에서 바이너리 코드를 사용하고, 잠금이 완료되면 서모미터 코드로 전환하여 높은 주파수 대비 선형성과 낮은 지터 특성을 달성한다. 이 접근법은 낮은 DCO 이득(Kdco) 값을 요구하는 응용에서 서모미터 코드만을 사용하는 기존 방식과 비교하여 스위치의 수를 현저히 줄이고 발진기의 면적을 최소화한다. 또한, 지터 특성은 서모미터 코드만을 사용하는 방식과 동일한 수준을 유지한다. SystemVerilog 및 Verilog HDL을 사용한 모델링과 RTL 수준에서의 설계를 통해 이 기법의 효과가 입증되었다.

Programmable Digital On-Chip Terminator

  • Kim, Su-Chul;Kim, Nam-Seog;Kim, Tae-Hyung;Cho, Uk-Rae;Byun, Hyun-Guen;Kim, Suki
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -3
    • /
    • pp.1571-1574
    • /
    • 2002
  • This paper describes a circuit and its operations of a programmable digital on-chip terminator designed with CMOS circuits which are used in high speed I/O interface. The on-chip terminator matches external reference resistor with the accuracy of ${\pm}$ 4.1% over process, voltage and temperature variation. The digital impedance codes are generated in programmable impedance controller (PIC), and the codes are sent to terminator transistor arrays at input pads serially to reduce the number of signal lines. The transistor array is thermometer-coded to reduce impedance glitches during code update and it is segmented to two different blocks of thermometer-coded transistor arrays to reduce the number of transistors. The terminator impedance is periodically updated during hold time to minimize inter-symbol interferences.

  • PDF

디코더 면적을 줄이는 새로운 전류구동 셀 매트릭스 DAC 구조 (A Novel Current Steering Cell Matrix DAC Architecture with Reduced Decoder Area)

  • 정상훈;신홍규;조성익
    • 전기학회논문지
    • /
    • 제58권3호
    • /
    • pp.627-631
    • /
    • 2009
  • This paper presents a novel current steering cell matrix DAC(digital-to-analog converter) architecture to reduce decoder area. The current cell matrix of a existing architecture is selected by columns and lows thermometer code decoder of input bits. But The current cell matrix of a proposal architecture is divided 2n by the thermometer code decoder of upper input bits and are selected by the thermometer code decoder of middle and lower input bits. Because of this configuration, decoder numbers have increased. But the gate number that composed of decoder has decreased. In case of the designed 8 bit current steering cell matrix DAC, the gate number of decoder has decreased by about 55% in comparison with a existing architecture.

고온에서 박막의 기계적 거동 측정 방법 (Method for Measuring Mechanical Behaviors of Thin Films at High Temperature)

  • 임상채;주재황;강기주
    • 대한기계학회논문집A
    • /
    • 제27권1호
    • /
    • pp.102-108
    • /
    • 2003
  • Recently, the authors have developed a new material test system fur thin film at the high temperature. It is so compact and precise with sub micron resolution that it seems to be a useful tool fur research of the oxide film growth, its mechanical behavior and failure mechanism. To this end. in this paper three methologies are described for in-situ monitoring of the displacement & strain and the temperature, the oxide thickness. These are the Laser Speckle analysis with digital image correlation technique, the two-color infra-red thermometer and the laser reflection interferometry respectively. The calibration results and some issues which should be addressed for practical application are presented.

디지털 PLL을 위한 높은 해상도를 갖는 시간-디지털 변환기의 연구 (A Study on High Resolution Time to Digital Converter for All Digital PLL)

  • 김용우;안태원;문용
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.587-588
    • /
    • 2008
  • Digital PLL을 위한 높은 해상도를 갖는 TDC(Time to Digital Converter)를 $0.18{\mu}m$ CMOS 공정으로 설계하였다. 2단 구조를 갖는 TDC를 제안하였고 이를 Cadence Spectre를 이용하여 검증하였다. TDC는 Difference pulse generator, coarse 변환기와 fine 변환기로 구성된다. 그리고, 2단 변환기와 Thermometer decoder를 이용하여 delay cell의 수를 적게 유지하면서도 높은 해상도를 얻을 수 있었다.

  • PDF

서울지역 학교 영양(교)사의 PHF에 대한 인식 및 CCP 관리기준 수행실태 조사 - HACCP 시스템 CCP 3~CCP 7을 중심으로 - (Research Study on Seoul Region School Nutritionists' Perception of Potentially Hazardous Foods and Execution Conditions of Managing CCP Control Standard of the HACCP System - Focusing on CCP 3~CCP 7 -)

  • 이애랑
    • 동아시아식생활학회지
    • /
    • 제26권6호
    • /
    • pp.517-530
    • /
    • 2016
  • This research was conducted on Seoul region elementary, middle, and high school nutritionists to analyze execution conditions of HACCP control standards, focusing on PHF and CCP 3~CCP 7, in order to determine more efficient methods for school meals' sanitation system settlement. All surveys were distributed and collected via email. A total of 305 survey papers were collected, and 300 school results were analyzed. The following percentage of nutritionists perceived the following foods as potentially hazardous foods(PHF): raw or cooked animal foods (94.7%), blossomed seed products (93.7%), packed pickled radish (36.7%), unopened mayonnaise (30.2%), and unopened snails & corn cans 54.8%. Exactly 51.2% of nutritionists believed that foods were properly supplied via CCP 3's food quality standard. Exactly 33.9% of nutritionists answered that they had never corrected the digital thermometer since there were no issues with the CCP 4's digital thermometer correction frequency level. As for CCP 5's chroline disinfection of green vegetables, 57.1% of nutritionists answered that vegetables were slightly softened while 36.2% said there were no changes at all. According to the nutritionists, the most difficult execution level of CCP levels (excluding CCP 3, CCP 4) was CCP 7 (37.1%), CCP 6 (16.4%), and CCP 2 (16.4%). For the above results, proper training/education must be enforced so that nutritionists can have a clear notion of the PHF. A solution must be developed enhancing the execution of CCP 4's digital thermometer correction frequency level. For CP 5's chroline disinfection of green vegetables, food characteristics must be considered to suggest an appropriate number and method of cleansing. Furthermore, cooking employees are needed that properly use and manage cooling & heating equipments to maintain heated foods above $57^{\circ}C$ under the CCP 7 standard.

수부냉증 진단방법에 관한 기초연구 (Diagnostic Tool for Cold Sensation of Hands: A Preliminary Study)

  • 고승우;박종주;공경환;고호연
    • 대한한방내과학회지
    • /
    • 제36권3호
    • /
    • pp.228-235
    • /
    • 2015
  • Objectives: The aim of this study was to find an effective medical device to detect cold sensation of hands. Methods: Patients with cold sensation of hands (N=42) were recruited in July 2013. We surveyed patients’ general characteristics, severity of cold sensation, body temperature in Nogung (PC8) and Hyeopbaek (LU4) measured with a digital thermometer, digital infrared thermal imaging, and pulse wave velocity. Results: The relation between severity of cold sensation and temperature in Nogung (PC8) and Hyeopbaek (LU4) was statistically significant. The results showed a higher correlation of severity of cold sensation with Nogung (PC9) than with Hyeopback (LU4) temperature. No other indices were statistical significant. Conclusions: Measuring the Nogung (PC9) temperature is most reasonable for assessing the severity of cold sensation of hands. To generalize this result, however, a large-scale study is warranted.

고속 임베디드 시스템 응용을 위한 CMOS AD 변환기 설계 (The Design of CMOS AD Converter for High Speed Embedded System Application)

  • 권승탁
    • 한국통신학회논문지
    • /
    • 제33권5C호
    • /
    • pp.378-385
    • /
    • 2008
  • 본 논문은 고속 임베디드 시스템에 사용하기 위해 CMOS AD 변환기(Analog-to-Digital Converter)를 설계하였다. 이 AD 변환기는 효율적인 구조로 설계하기 위하여 전압을 예측할 수 있는 플래시 AD 변환기와 자동 영을 기반으로 하여 설계된 비교기를 사용하였다. 이 구조의 변환속도는 기존의 플래시 AD 변환기와 거의 같지만 비교기와 연결된 회로가 줄어들었기 때문에 전체 회로의 크기를 크게 줄일 수 있었다. 이 ADC는 $0.25{\mu}m$ 디지털 CMOS 기술로 구현되었다.

HDD 읽기 채널용 6-bit 800 Msample/s DSDA 아날로그/디지털 변환기의 설계 (Design of 6-bit 800 Msample/s DSDA A/D Converter for HDD Read Channel)

  • 정대영;정강민
    • 정보처리학회논문지A
    • /
    • 제9A권1호
    • /
    • pp.93-98
    • /
    • 2002
  • 본 논문에서는 하드디스크 드라이브 읽기 채널용 아날로그/디지털 변환기를 설계하였다. 본 회로는 고속 저에러율 비교 동작이 가능한 빠른 regenerative autozero 비교기에 기반을 두고 있고, 아키텍쳐에 Double Speed Dual ADC(DADA) 방식을 사용하여 전체 A/D 변환기의 속도를 효과적으로 향상시켰다. 또한 autozero 구조에 적합한 새로운 타입의 thermometer-to-binary 디코더를 사용하여 글리치를 제거하였고 기존의 구조를 보다 최적화시켰다. 이 ADC는 6-bit, 해상도, msample/s 최대 변환속도로 설계되었으며, 390mW 전력 소모와 한 클럭주기의 latency를 가진다. 설계에 0.65m CMOS 공정을 사용하였다.