• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.3-10
• /
• 2014

Digital maps are made by experts who digitize the data from aerial image and field survey. And the digital maps are updated every 2 years in National Geographic Information Institute. Conventional Digitizing methods take a lot of time and cost. And geographic information needs to be modified and updated appropriately as geographical features are changing rapidly. Therefore in this paper, we modify the digital map updates the road information for rapid high-resolution aerial orthophoto taken at different times were performed HSI color conversion. Road area of the cassification was performed the region growing methods. In addition, changes in the target area for analysis by applying the CVA technique to compare the changed road area by analyzing the accuracy of the proposed extraction.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.327-340
• /
• 2002

In this paper, we performed the design study of a wide-band digital autocorrelation spectrometer for the observation study of an extra-galaxy's spectral lines and the survey research of the special radio sources in field of the radio astronomy observational research. The autocorrelation spectrometer designed in this paper can be used to their spectrometer of any system because this spectrometer has a wide dynamic power and frequency range properties. In this system we use the aliasing sampling method to minimize the band loss. For the output signal of the correlator we can increase the signal processing speed using by a special DSP chip, the integration and the FFT using hardware, so this spectrometer can support the newest developed technique for the radio astronomy observation so called “On the fly” method.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.4
• /
• pp.23-32
• /
• 2021

For agricultural water management, it is essential to establish the digital infrastructure data such as agricultural watershed, irrigated area and canal network in rural areas. Approximately 70,000 irrigation facilities in agricultural watershed, including reservoirs, pumping and draining stations, weirs, and tube wells have been installed in South Korea to enable the efficient management of agricultural water. The total length of irrigation and drainage canal network, important components of agricultural water supply, is 184,000 km. Major problem faced by irrigation facilities management is that these facilities are spread over an irrigated area at a low density and are difficult to access. In addition, the management of irrigation facilities suffers from missing or errors of spatial information and acquisition of limited range of data through direct survey. Therefore, it is necessary to establish and redefine accurate identification of irrigated areas and canal network using up-to-date high resolution images. In this study, previous existing data such as RIMS (Rural Infrastructure Management System), smart farm map, and land cover map were used to redefine irrigated area and canal network based on appropriate image data using satellite imagery, aerial imagery, and drone imagery. The results of the building the digital infrastructure in rural areas are expected to be utilized for efficient water allocation and planning, such as identifying areas of water shortage and monitoring spatiotemporal distribution of water supply by irrigated areas and irrigation canal network.

• Asia Marketing Journal
• /
• v.15 no.3
• /
• pp.1-14
• /
• 2013

Our research brings managerial insights for developing new digital convergence of devices and services. To explain the phenomenon of device and service convergence, we combine two different approaches from separate research fields: a perceptual mapping technique generally used for segmentation in marketing and associative network analysis mobilized to understanding network structure of core and peripheral as well as the information mediating role of nodes in network science. By combining these two approaches, we provide an in-depth analysis of the associations among devices and services by assessing the centrality of device and service nodes in an associative network. This is done by examining the connections between these services and devices as well as investigating the role of mediation in the combined device-service associative network. Our results based on bi-partite network analysis of survey responses from 250 Internet Protocol (IP) television viewers show which device and which service will play the major role in future device and service convergence as well as which characteristics and functionalities have to be incorporated into future convergence. Among the devices, the mobile handset with the betweenness centrality of 0.26 appears to be the device that would lead future device convergence. Among the services, wireless broadband with the betweenness centrality of 0.276 appears to be the service on which future service convergence needs to be developed. This result is quite unexpected, since wireless broadband has a lower penetration rate than other services, such as fixed broadband and cable TV. In addition, we indicate the possibility of converging devices, such as personal digital assistant (PDA) and mobile handset, and services, such as IPTV and mobile Internet, into wireless broadband services in the future.

• Journal of Korean Society of Rural Planning
• /
• v.10 no.2 s.23
• /
• pp.35-42
• /
• 2004

This study aimed at establishing the multi-ranged approach on data acquisition technique for rural landscape planning, which tried categorization, grading and transferring of landscape elements in the more detailed level. For the systematic management of database for the topographic informations in the village level, a kind of the aerial photographing techniques with UAV(Unmanned Aerial Vehicle) was used and its resultant data for the landscape simulation of the rural village, which in turn helped the convenient approach to understanding of its comprehensive spatial structure. The image data from aerial photography was systematically processed through; First, after revision of the distorted one, the image map was adjusted with the topographical and cadastral maps. Second, the farm houses and buildings, and other facilities difficult to find out in the topographical map was digitally read from the adjusted image. The topographical landscape view of rural village was simulated on the base of DEM(Digital Elevation Model) and the 3-dimensional shapes of farm houses and buildings were automatically modelled using the input system developed by the author. In conclusion, the aerial image information adjusted with the edited maps could give more intuitive and detailed villagescape than the ordinary one and through landscape simulation of the rural village, its topography, features of houses/buildings and spatial distribution of land uses were effectively reproduced. And, by the linkage between field survey and photographed/simulated results of the typical landscape elements using hyper-link method, it would be expected to develop as an effective visualization technique of rural landscape.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.691-697
• /
• 2005

Recently, the development of accurate gravity-meter and GPS make it possible to obtain high resolution gravity data. Though gravity data interpretation like modeling and inversion has significantly improved, gravity data processing itself has improved very little. Conventional gravity data processing removes gravity effects due to mass and height difference between base and measurement level. But, it would be a biased density model when some or whole part of anomalous bodies exist above the base level. We attempted to make a multiquadric surface of the survey area from topography with DEM (Digital Elevation Map) data. Then we constituted rectangular blocks which reflect real topography of the survey area by the multiquadric surface. Thus, we were able to carry out 3-D inversions which include information of topography. We named this technique, 3-D Gravity Terrain Inversion (3DGTI). The model test showed that the inversion model from 3DGTI made better results than conventional methods. Furthermore, the 3-dimensional model from the 3DGTI method could maintain topography and as a result, it showed more realistic geologic model. This method was also applied on real field data in Masan-Changwon area. Granitic intrusion is an important geologic characteristic in this area. This method showed more critical geological boundaries than other conventional methods. Therefore, we concluded that in the case of various rocks and rugged terrain, this new method will make better model than convention ones.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.277-288
• /
• 2014

The purpose of the study is to investigate the students' learning motive through the application of the learner-centered program Creative Teaching Technique(CTT) conducted by undergraduate school of Medical Record Information Management(MRIM), and to improve learning from the results. A questionnaire survey was carried out that started March to June 2013 among the sixty freshmen college students from the Health Administration Department who participated in the CTT during the 12 weeks training. The main results are as follows. The subjects' cognitive results form CTT were relativiely higher in 'increased voluntary participation(4.03)', 'improved concentration(4.00)', 'increased understanding(3.97)' in order. The effects of the tools used in CTT were higher as well in 'two members in a tem(4.08)', 'three-dimensional tools(4.03)' and 'quiz cards(3.95)' in order. While undergoing CTT, the learners considered reviewing repeatedly the content before starting and finishing as mostly helpful. Concludingly, this learner-centered CTT program identified having positive effects on their participation, concentration and understanding. To maximize the learning effects, development and activating a systematic, continuous and supportive program like this CTT is highly recommended.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.29-38
• /
• 2010

The airborne LiDAR which was introduced in the early 2000's provides the point data. The new methods for the verification of LiDAR materials with high accuracy which is different from the existing airborne survey are needed. In accordance with the rules of airborne laser survey which were enacted in 2009, the verifications by three methods of Unmeasured Rate and point accuracy, point density have been executed, and Unmeasured Rate is to evaluate the rate for the presence of points within uniform grids except non-reflective areas such as watershed areas. For the calculation of Unmeasured Rate, non-reflective areas should be removed by all means, and in case of normal LiDAR materials, as there are scant points for watershed areas, watershed areas should be divided by additional spatial information. So, in this study, the watershed areas were extracted using domain extension technique from the high resolution CIR images of 0.3m grade. In addition, in order to compare the accuracy of Unmeasured Rate calculated, the comparative analysis of the Unmeasured Rate calculated by digital maps has been done. In conclusion, we found that 1I1e accuracy of Unmeasured Rate extracted by domain extension technique is similar to the value extracted by digitizing technique.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.517-526
• /
• 2017

In this study, we analyzed the accuracy of elevation, slope, and area to the damage scale of the debris flow using the drones to track the details of the debris flow that method was between the digital topographical map(1/5,000) method and GPS ground survey method. The results are summarized as follows. At first, in the comparison of elevation, the value by the drones was 3.024m lower than the digital topography map, but in case of slope the average slope was $1.20^{\circ}$ and the maximum slope was $10.46^{\circ}$ which was higher by the drones image. Secondly, the difference area is $462m^2$ between on the digital topographic map and the drones image was calculated high, because it is determined by reflecting the uplift of the terrain as a point that calculated more accurate than the digital topographic map. Therefore, when compared with the existing method, the drone image method was very effective in terms of time and manpower.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.685-692
• /
• 2018

The purpose of this study is to develop a prediction model of hypertension in middle-aged adults using Statistical analysis. Statistical analysis and prediction models were developed using the National Health and Nutrition Survey (2013-2016).Binary logistic regression analysis showed statistically significant risk factors for hypertension, and a predictive model was developed using logistic regression and the Naive Bayes algorithm using Wrapper approach technique. In the statistical analysis, WHtR(p<0.0001, OR = 2.0242) in men and AGE (p<0.0001, OR = 3.9185) in women were the most related factors to hypertension. In the performance evaluation of the prediction model, the logistic regression model showed the best predictive power in men (AUC = 0.782) and women (AUC = 0.858). Our findings provide important information for developing large-scale screening tools for hypertension and can be used as the basis for hypertension research.