• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.538-550
• /
• 1998

The variable frequency and variable voltage AC source made by a conventional inverter which is composed of power semi-conductors includes much noises in sine wave due to high frequency switching of DC source. In this paper the 3rd low pass LC filter for a variable speed 3 phase induction motor driven by a full bridge inverter is introduced to solve the EMI problem by serious noise current. The utility of a modified 3rd order Butterworth LC filter is confirmed through FFT analysis of sine waves and noiseless ACsource can be obtained by the proposed LC filter. The speed of a 3 phase induction motor driven by a full bridge inverter with a LC filter is satisfactorily controlled by a digital PID controller under the condition of stepwise load and setpoint changes.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.850-853
• /
• 1987

A VLSI digital filter design using a semi-custom method is described. The digital filters composed of TDM/FDM Transmultiplexer are designed. Using the polyphase network approach a filter bank composed of only all-pass digital filter sections was designed. The use of all-pass filters as basic building blocks is shown to provide a transmultiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler systems is used to reduce the design time and increase the credibility of designed filters. A design of 1st order and 2nd order all pass filters is done using CMOS 2um N-well double metal cell.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.950-956
• /
• 1986

In this paper, a direct addressing mode of a microprocessor is introduced to save memory capacity, and also a dedicated digital filter is constructed to speed up the filter processing and to enable an easy selection of the impulse response types. A theoretical analysis has been conducted on the errors caused by the finite word klength, rounding-off and multiplication procedures. The digital filter designed by the proposed method is made into a module which can function as a 7th-order recursive or a 14-order nonrecursive type with a simples witch operation. The proposed filter is implemented on a printed-circuit board. The frequency characteristics of this filter can be controlled by the multiplication values stored in ROMs. A low-pass, a high-pass and a band-pass filter have been designed and their frequency characteristics are verified by actual measurements. For a order higher filer, two filter modules have been cascaded into an integrated filter of 23rd-order non-recursive low-pass type and a 12th-order recursive multiband type. Their frequency characteirstics have been found to agree with the theory.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.93-96
• /
• 2000

This paper has been proposed an audio DAC structure composed of FIRs and IIR filters as digital interpolation filter to integrate the off-chip analog low-pass filter on-a-chip. The passband ripple(< 0.41${\times}$fs), passband attenuation(at 0.41${\times}$fs) and stopband attenuation(> 0.59${\times}$fs) of the Δ$\Sigma$ modulator output using the proposed digital interpolation filter had ${\pm}$ 0.001 ［㏈］, -0.0025［㏈］ and -75［㏈］, respectively. Also the inband group delay was 30.07/fs［s］ and the error of group delay was 0.1672%. Also, the attenuation of stopband has been increased -20［㏈］ approximately at 65［㎑］, out-of-band. Therefore the RC products of analog low-pass filter on chip have been decreased compared with the conventional digital interpolation filter structure.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2012

We propose a novel technique that records the horizontal-parallax-only (HPO) hologram of a real object using optical scanning holography (OSH). The proposing HPO-OSH is composed of a conventional OSH and an electronics low pass filter. When we scan an object along vertical direction before horizontal direction, the electronic low pass filter filters the vertical fringes with preserving horizontal fringes and gives an HPO hologram. To the best of our knowledge, this is the first time to record the HPO hologram using OSH without either truncation of the scanning beam or digital post processing.

• Journal of Industrial Technology
• /
• v.14
• /
• pp.3-17
• /
• 1994

This paper develops a design technique for approximating nonseparable frequency characteristics by sums and products of separable transfer functions. Therefore nonseparable frequency characteristics includes the four-quadrant symmetry filters. The desired filter with half plan symmetry is obtained by shifting a low pass characteristic in the frequency domain, and by combining these shifted characteristics. Also the paper develops the technique for designing recursive and nonrecursive two dimensional digital filters by the application of a complex transformation to one dimensional low pass filter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.157-159
• /
• 2010

Most digital cameras apply a Charge Coupled Device(CCD) Sensor or a Complementary Metal Oxide Semiconductor(COMS) Sensor. And the images captured these sensors include unwanted noises. In this paper, we proposed a method of the Noise Reduction(NR) about noise reduction or recovery in the image. The proposed NR method is related to Bandwidth of the Low Pass Filter(LPF). For improvement of NR, we were changing the filter coefficient of the LPF. The results of simulations with various filter coefficients, [1 2 1] in the LPF and [-1 2 -1] in the High Pass Filter(HPF) have ideal frequency bandwidth and high performance. We proposed a filter coefficient [1 2 1] and [-1 2 -1] in the LPF and the HPF respectively.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.443-450
• /
• 2006

In digital image communication systems, YUV 4:2:0 or YUV 4:2:2 images filtered and subsampled versions of YUV 4:4:4 images are utilized and these images recover their size by an interpolation filter. Low pass filters and interpolation filters in the image communication systems are generally utilized. Thus, to improve the image quality, efficient low pass filters and interpolation filters are still required. In this paper, we propose new and efficient low pass filters and interpolation filters and their design method. The low pass filters and interpolation filters used in the MPEG-2 system were developed independently. We utilize wavelet transforms to jointly design low pass filters and interpolation filters. Simulation results show that the proposed filters are superior to the filters used in MPEG-2 in terms of PSNR. In addition, the length of the proposed interpolation filters is shorter than that of the filters used in the MPEG 2 system.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.91-93
• /
• 2008

In this paper, novel phase angle following algorithm for the single phase grid-connected inverter is proposed. Gird-connected inverter needs phase angle detection for synchronization grid voltage with the inverter output. In case of single phase grid-connected inverter, zero crossing detection and virtual 2-phase PLL using digital all pass filter or digital low pass filter are used conventionally. But these methods have a weakness for harmonics, noises and ripples. The proposed method of PLL achieve DFT(Discrete Fourier Transform) using Goertzel algorithm. It can extract fundamental voltage of grid. As a results, it can obtain phase angle using digital all pass filter without effect of harmonics, noises and ripples. Simulation results are presented to demonstrate the effectiveness of the proposed algorithm.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.847-850
• /
• 1998

One of the most difficult problem of designing VLSI is a mixed-circuit design, that is to design circuit containing both analog parts and digital parts. Digital to analog converter and analog to digital converter is a typical case. Especially it can be a serious problem when mixed circuit are put into a large digital circuit like microcontroller. However nowadays this problem is settled by separating analog circuit parts outside the IC. This technique is based on converting a digital signal into a pulse sequence. Then an analog signal is obtained by averaging this pulse sequence at the external low-pass filter. An anlog to digital converter is designed using a stochastic logic instead of a traditional PWM (pulse-width modulation) signal and ins implemente dusing FPGa. Stochastic pulse sequence can be made as a simple circuits and moreover can be mathematically processed by simple circuits -AND gates. The spectral property of stochastic pulse sequence method is better than that of PWM method. So it make easy to design a external low-pass filter. This technique has important advantages, especially the reduction of the ADC cost.