• 패션비즈니스
• /
• 제17권6호
• /
• pp.28-43
• /
• 2013

Recent trends toward the collaborations among various sectors of academia and research areas have brought interests and significances in new activities especially in the fashion and textile areas. One of the collaboration examples is the recent research projects on 3D virtual clothing systems based on the 3D CAD software. The 3D virtual clothing systems provide simulated apparels with high degrees of fidelity in terms of color, texture, and structural details. However, since real fabrics exhibit strong nonlinearity, anisotropy, viscoelasticity, and hysteresis, the 3D virtual clothing systems need fine tuning parameters for the simulation process. In this study, characteristics of silk fabrics, which are woven by using degummed silk and raw silk yarns, are being analyzed and compared. Anisotropic properties may be measured as warp and filling direction properties separately in woven fabrics, such as warp tensile stress or filling bending rigidity. Hysteretic properties may be measured as bending hysteresis or shear hysteresis by using KES measurements. These data provide deformation-force relationships of the fabric specimen. Three-dimensional effects obtained when using these characteristic fabrics are also analyzed. The methods to control the three-dimensional appearance of the sewn fabric specimens when utilizing a programmable microprocessor-based motor device, as prepared in this study, are presented. Based on the physical and mechanical properties measured when using the KES equipment, the property parameters are being into a 3-dimensional virtual digital clothing system, in order to generate a virtual clothing product based on the measured silk fabric properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.491-491
• /
• 2011

Transparent and flexible electronic devices that are light-weight, unbreakable, low power consumption, optically transparent, and mechanical flexible possibly have great potential in new applications of digital gadgets. Potential applications include transparent displays, heads-up display, sensor, and artificial skin. Recent reports on transparent and flexible field-effect transistors (tf-FETs) have focused on improving mechanical properties, optical transmittance, and performances. Most of tf-FET devices were fabricated with transparent oxide semiconductors which mechanical flexibility is limited. And, there have been no reports of transparent and flexible all-organic tf-FETs fabricated with organic semiconductor channel, gate dielectric, gate electrode, source/drain electrode, and encapsulation for sensor applications. We present the first demonstration of transparent, flexible all-organic sensor based on multifunctional organic FETs with organic semiconductor channel, gate dielectric, and electrodes having a capability of sensing infrared (IR) radiation and mechanical strain. The key component of our device design is to integrate the poly(vinylidene fluoride-triflouroethylene) (P(VDF-TrFE) co-polymer directly into transparent and flexible OFETs as a multi-functional dielectric layer, which has both piezoelectric and pyroelectric properties. The P(VDF-TrFE) co-polumer gate dielectric has a high sensitivity to the wavelength regime over 800 nm. In particular, wavelength variations of P(VDF-TrFE) molecules coincide with wavelength range of IR radiation from human body (7000 nm ~14000 nm) so that the devices are highly sensitive with IR radiation of human body. Devices were examined by measuring IR light response at different powers. After that, we continued to measure IR response under various bending radius. AC (alternating current) gate biasing method was used to separate the response of direct pyroelectric gate dielectric and other electrical parameters such as mobility, capacitance, and contact resistance. Experiment results demonstrate that the tf-OTFT with high sensitivity to IR radiation can be applied for IR sensors.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.165-177
• /
• 2015

Purpose: Accurate monitoring of soil strength is a key technology applicable to various precision agricultural practices. Soil strength has been traditionally measured using a cone penetrometer, which is time-consuming and expensive, making it difficult to obtain the spatial data required for precision agriculture. To improve the current, inefficient method of measuring soil strength, our objective was to develop and evaluate an in-situ system that could measure horizontal soil strength in real-time, while moving across a soil bin. Methods: Multiple cone-shape penetrometers were horizontally assembled at the front of a vertical plow blade at intervals of 5 cm. Each penetrometer was directly connected to a load cell, which measured loads of 0-2.54 kN. In order to process the digital signals from every individual transducer concurrently, a microcontroller was embedded into the measurement system. Wireless data communication was used between a data storage device and this real-time horizontal soil strength (RHSS) measurement system travelling at 0.5 m/s through an indoor experimental soil bin. The horizontal soil strength index (HSSI) measured by the developed system was compared with the cone index (CI) measured by a traditional cone penetrometer. Results: The coefficient of determination between the CI and the HSSI at depths of 5 cm and 10 cm ($r^2=0.67$ and 0.88, respectively) were relatively less than those measured below 20 cm ($r^2{\geq}0.93$). Additionally, the measured HSSIs were typically greater than the CIs for a given numbers of compactor operations. For an all-depth regression, the coefficient of determination was 0.94, with a RMSE of 0.23. Conclusions: A HSSI measurement system was evaluated in comparison with the conventional soil strength measurement system, CI. Further study is needed, in the form of field tests, on this real-time measurement and control system, which would be applied to precision agriculture.

• 로봇학회논문지
• /
• 제8권1호
• /
• pp.29-36
• /
• 2013

This paper presents a sensitivity optimization of a MEMS (microelectromechanical systems) gyroscope for a magnet-gyro system. The magnet-gyro system, which is a guidance system for a AGV (automatic or automated guided vehicle), uses a magnet positioning system and a yaw gyroscope. The magnet positioning system measures magnetism of a cylindrical magnet embedded on the floor, and AGV is guided by the motion direction angle calculated with the measured magnetism. If the magnet positioning system does not measure the magnetism, the AGV is guided by using angular velocity measured with the gyroscope. The gyroscope used for the magnet-gyro system is usually MEMS type. Because the MEMS gyroscope is made from the process technology in semiconductor device fabrication, it has small size, low-power and low price. However, the MEMS gyroscope has drift phenomenon caused by noise and calculation error. Precision ADC (analog to digital converter) and accurate sensitivity are needed to minimize the drift phenomenon. Therefore, this paper proposes the method of the sensitivity optimization of the MEMS gyroscope using DEAS (dynamic encoding algorithm for searches). For experiment, we used the AGV mounted with a laser navigation system which is able to measure accurate position of the AGV and compared result by the sensitivity value calculated by the proposed method with result by the sensitivity in specification of the MEMS gyroscope. In experimental results, we verified that the sensitivity value through the proposed method can calculate more accurate motion direction angle of the AGV.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.

• 한국가구학회지
• /
• 제22권3호
• /
• pp.160-173
• /
• 2011

Increased internet use under a ubiquitous environment may be called as a great human information space revolution followed by Industrial Revolution. This revolution is exerting its significant influence over all the industry as a whole with speed faster than that of any other times. Along with this trend, if furniture design field that leads living culture should fail to jump on this main stream without noticing it, it may be reduced to a unpopular field some day without any sign of recovery. Under this background, this study is intended to recognize a goal aiming at understanding our rapidly changing living environment and leading our way positively. Currently, our surrounding living environment is immersed in computers here and there and Mark Weiser once defined a system that moves in advance before an action as ubiquitous computing and in this respect, I am going to observe a detailed transformation process of space. First nature of the space may be defined as atoms, a physical space equivalent to a spatial element and Bits space that is untouchable is usually called as 2nd space and a combination of atoms and Bits is an intelligent space - 3rd space - that can be intelligible without touching it and finally, this space is called as a ubiquitous space. This spatial transformation is developed by several changes of living environment and we may call it as living trend or interior design trend. Transformation in terms of social perspective, space structural perspective and digital technique perspective may be enumerated. These transformations were surveyed based on its contents being implemented at a future housing exhibition hosted by 5 construction companies along with fusion of information furniture and furniture depending on each housing space. In conclusion, it could be realized that most of the companies were decorating future space by implementing ubiquitous environment as a success factor of future housing market. It may be meaningful to note once again that under an interior environment, a fusion of furniture and information furniture is required considering interior trend elements.

• 대한통합의학회지
• /
• 제8권3호
• /
• pp.71-81
• /
• 2020

Purpose : The purpose of this study is to investigate the instant effect of Kinesio taping on pain decrease and improvement of functional disorder of the subjects who have lumbar instability. Methods : A total of 20 patients (13 men and 7 women) who have lumbar instability were chosen as the subjects. The experiment was conducted by assigning the subjects into Kinesio taping group and placebo taping group. A visual analog scale (VAS) was used to measure back pain and Biering-Sorensen test was applied to measure the muscle endurance of back extensor muscles. A digital dynamometer was used to test the isomeric contraction strength of lumbar extensor muscle. The subject performed single-leg stance and double-leg stance task and their static balancing ability was measured by a testing device that captures the static balancing ability. Results : In a within-group comparison, Kinesio taping group showed a significant decrease of VAS (p<.05) and a significant increase of endurance and strength of lumbar extensor muscle (p<.05). In Kinesio taping group, the shift distance in anterior-posterior sway and medial-lateral sway during the double-leg stance significantly decrease (p<.05). The shift distance in anterior-posterior sway and medial-lateral sway also significantly decreased during the single-leg stance (p<.05). Placebo taping group showed a significant decrease of visual analog scale (p<.05). In a between-group comparison, Kinesio taping group showed a significantly larger decrease of VAS (p<.05), significant larger increase of muscle endurance and muscle strength (p<.05), and significant larger decrease of anterior-posterior sway in the double-leg stance (p<.05), compared to placebo taping group. Conclusion : Application of Kinesio taping to the subjects with lumbar instability produced positive effect of reducing pain, increasing muscle strength and endurance, and improving static balancing ability.

• 방송공학회논문지
• /
• 제22권3호
• /
• pp.366-374
• /
• 2017

TV나 디지털 사이니지와 같은 화면표시장치들이 점점 커져감에 따라, 미디어의 종류가 UHD, 파노라마, 퍼즐형 미디어와 같은 광각의 미디어로 변하고 있다. 특히, 파노라마 및 퍼즐형 미디어는 스티칭을 통해 복수개의 카메라로 촬영된 비디오 클립을 합성한 형태로 구성된다. 그러나, 스티칭 과정의 처리 시간이 오래 걸리기 때문에 실시간 서비스에는 적용하기 어려운 문제가 있다. 따라서 본 논문에서는 스티칠 처리 시간을 감소하기 위한 방법으로, 영상간의 공간적 연관관계를 알려주는 2D Adjacency Matrix를 생성하는 것을 제안한다. Discrete Cosine Transform (DCT)를 사용하여, 비디오 소스의 각 프레임을 공간 영역에서 주파수 영역으로 변환 시킨다. 앞서 언급한 DCT 계수를 기반으로 효과적으로 이미지들의 공간적 연관관계를 알려주는 2D Adjacency Matrix를 생성한다. 본 논문에서는 각각의 비디오 클립들로부터 파노라마 영상과, 퍼즐형 미디어를 생성하기 위해 DCT를 이용한 2D Adjacency matrix 생성 방법을 제안한다.

• 융합신호처리학회논문지
• /
• 제19권1호
• /
• pp.14-19
• /
• 2018

최근 건강에 대한 관심과 욕구가 크게 증가하고 있으며, 이에 따라 스마트 헬스케어 산업이 크게 주목받고 있다. 이로 인해 일상생활 중 자신의 건강 상태를 지속적으로 확인하기 위한 원격의료시스템뿐만 아니라, 최근에는 국내외 기업에서 언제 어디서나 신체의 활동 정보를 계측 할 수 있는 웨어러블 디바이스들을 지속적으로 연구개발 및 시장에 선보이고 있다. 특히, 맥파와 심전도는 일상생활 중 자신의 건강상태를 지속적으로 모니터링하기 위한 생체신호로 가장 많이 활용되고 있다. 본 연구에서는 마이크 센서를 활용한 심장의 소리 즉, 심음의 계측을 통해 심장 활동 상태 모니터링이 가능한 시스템을 구현하고자 하며, 상용 전자 청진기과 비교평가를 통해 일상생활 중 지속적인 모니터링이 가능함을 확인 하였다.

• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.22-29
• /
• 2014

PURPOSE. This study aimed to investigate the potential clinical application of digitized silicone rubber impressions by comparing the accuracy of zirconia 3-unit fixed partial dentures (FPDs) fabricated from 2 types of data (working model and impression) obtained from a laser scanner. MATERIALS AND METHODS. Ten working models and impressions were prepared with epoxy resin and vinyl polysiloxane, respectively. Based on the data obtained from the laser scanner (D-700; 3Shape A/S, Copenhagen, Denmark), a total of 20 zirconia frameworks were prepared using a dental CAD/CAM system (DentalDesigner; 3shape A/S, Copenhagen, Denmark / Ener-mill, Dentaim, Seoul, Korea). The silicone replicas were sectioned into four pieces to evaluate the framework fit. The replicas were imaged using a digital microscope, and the fit of the reference points (P1, P2, P3, P4, P5, P6, and P7) were measured using the program in the device. Measured discrepancies were divided into 5 categories of gaps (MG, CG, AWG, AOTG, OG). Data were analyzed with Student's t-test ($\alpha$=0.05), repeated measures ANOVA and two-way ANOVA (${\alpha}=0.05$). RESULTS. The mean gap of the zirconia framework prepared from the working models presented a narrower discrepancy than the frameworks fabricated from the impression bodies. The mean of the total gap in premolars (P=.003) and molars (P=.002) exhibited a statistical difference between two groups. CONCLUSION. The mean gap dimensions of each category showed statistically significant difference. Nonetheless, the digitized impression bodies obtained with a laser scanner were applicable to clinical settings, considering the clinically acceptable marginal fit ($120{\mu}m$).