• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.144-144
• /
• 2002

Analysis techniques using stereo-photos of object is used widely in close-range-photogrammetry field. but, there is difficulty to use metric camera for specialist. In this study, stereo images were acquired using metric camera and general digital camera about slide in Youngdong area. And they were generated two DEMs based metric camera and digital camera. And it was analyzed the correlation of two DEMs. Therefore, in research that was presented effectiveness of digital camera take the place of metric camera for slope analysis.

• Korean Journal of Geomatics
• /
• v.3 no.1
• /
• pp.43-51
• /
• 2003

This paper presents the benefits of using close-range digital photogrammetric techniques for measuring the roughness of rock surfaces, using digital stereo images obtained from a Rolleiflex 6006 metric camera. To precisely measure surface roughness, we researched on how to use the flat and curved reference surface obtained from geometrically corrected digital images of the rock surface by using the least squares method. To test the precision of the proposed technique, the surface roughness has been measured between the reference surface and sample areas of very smooth-surfaced rock. Then the results were compared with the measurements obtained from a laser sensor profilometer.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.199-208
• /
• 1995

Significant developments in the use of digital imagery for close-range photogrammetric metrology have occured in the last few years because of technological advances in digital image processing. Present day needs for applications of digital image processing technique to measurements of photographs obtained with non-metric camera at reduced cost, automation and convenience. In order for this application to be useful, a detailed procedure must be developed. Investigation of this study is given to the detailed procedure for the digital measurements of the object space data from the scanned non-metric photographs.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.495-501
• /
• 2016

This study applied close-range digital photogrammetry to measure deformation of reinforced-soil wall as the passed time. We proposed to utilize the photogrammetric-board to determine 3D coordinates and compute exterior orientation parameters from the images without measuring control points. The displacements by the proposed method are compared with those of the Total-station. As results, measuring errors was within 5cm, and the deformation was not occurred in the 3 months. The proposed method using the photogrammetric-board therefore can be utilized to measure deformation of the reinforced-soil wall.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.59-65
• /
• 2008

Digital close-range photogrammetric technique can measure and describe 3D geometric farm from 2D image. This technique is increasingly applied in the field of sciences. In the fields of civil and mechanical engineering, which need precise measurements for design, expensive measuring equipments are widely used. In occasions where visual inspection is required in addition to other forms of measurements, appropriate measuring equipments have not been yet available. This study utilizes digital close-range photogrammetric technique to quantitatively analyze behavior patterns before and after destruction from test model of reinforced-soil wall. Then the results are compared with the measurements obtained using digital theodolite to verify the reliability of the proposed method.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.517-527
• /
• 2011

Currently, there is a considerable interest in 3D object reconstruction using terrestrial laser scanner (TLS) systems due to their ability to automatically generate a considerable amount of points in a very short time. To fully map an object, multiple scans are captured. The different scans need to be registered with the help of the point cloud in the overlap regions. To guarantee reliable registration, the scans should have large overlap ratio with good geometry for the estimation of the transformation parameters among these scans. The objective of this paper is to propose a registration method that relaxes/eliminates the overlap requirement through the utilization of photogrammetrically reconstructed features. More specifically, a point-based procedure, which utilizes non-conjugate points along corresponding linear features from photogrammetric and TLS data, will be used for the registration. The non-correspondence of the selected points along the linear features is compensated for by artificially modifying their weight matrices. The paper presents experimental results from simulated and real datasets to illustrate the feasibility of the proposed procedure.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.399-404
• /
• 2002

In this study, it was intended to present solution for learners to understand and utilize photogrammetry more easily using economic medium except expensive measuring equipment. For this, 3D point data was analysed by generating event to stereo image on monitor, and input to CAD system automatically. so, real time vector editing and drawing with coordinates measurement were possible. The system was verified, and the monitoring for real construction was performed. so, it is expected to be utilized as a practical use software in related fields.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.159-172
• /
• 1995

This study aims to apply digital photogrammetric methods on the close range photogrammetry. To get a three dimensional position with digital photogrammetric method, scanning, image matching, and bundle adjustment are performed. Comparing the three dimensional position computed by digital photogrammetric methods with ground survey values, the errors can be detected. Analyzing the errors, it is possible to present a new digital photogrammetric method for the close range photogrammetry. Image matching method used in this study is area-based pixel unit and subpixel unit method. As a result of the study, three dimensional position error is 3.32mm and the error in the single coordinate axis direction is 0.76mm in pixel unit and in subpixel unit, respective error is 3.98mm and 0.73mm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.31-43
• /
• 2015

This study had been aimed to conduct the camera calibration on VLBI antenna in the Space Geodetic Observation Center of Sejong City with a low-cost digital camera, which embedded in a mobile phone to determine the three-dimension position coordinates of the VLBI antenna, based on stereo images. The initial values for the camera calibration have been obtained by utilizing the Direct Linear Transformation algorithm and the commercial digital photogrammetry system, PhotoModeler $Scanner^{(R)}$ ver. 6.0, respectively. The accuracy of camera calibration results was compared with that the camera calibration results, acquired by a bundle adjustment with nonlinear collinearity condition equation. Although two methods showed significant differences in the initial value, the final calibration demonstrated the consistent results whichever methods had been performed for obtaining the initial value. Furthermore, those three-dimensional coordinates of feature points of the VLBI antenna were respectively calculated using the camera calibration by the two methods to be compared with the reference coordinates obtained from a total station. In fact, both methods have resulted out a same standard deviation of $X=0.004{\pm}0.010m$, $Y=0.001{\pm}0.015m$, $Z=0.009{\pm}0.017m$, that of showing a high degree of accuracy in centimeters. From the result, we can conclude that a mobile phone camera opens up the way for a variety of image processing studies, such as 3D reconstruction from images captured.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2000.10a
• /
• pp.40-50
• /
• 2000

본 연구에서는 Rolleiflex 6006 측정용 카메라로 촬영된 사진과 DCS 420 디지털 카메라로부터 촬영된 화상을 이용, 수치근접사진측량을 실시한 후, 조경석의 표면 거칠기 측정 정확도 향상을 위하여 최소제곱법으로 기준평면 또는 기준곡면을 찾아 사용하는 방법을 연구하였으며, 조경석 표면의 연마 이전과 연마 이후의 표면 거칠기를 측정, 비교하여 연마후의 거칠기 감소크기를 산출하고, 측정 정확도를 알아보기 위하여 거칠기가 거의 없는 평면인 돌과 곡면인 돌의 표면 거칠기를 측정한 결과, 그 거칠기를 기대정확도 이상인 각각 $\pm$0.lmm 및 $\pm$0.2mm의 정확도로 측정할 수 있었다. 또한 측정용 카메라인 경우 렌즈왜곡 보정에 있어서 검정자료를 토대로 기준점을 사용하지 않는 직접보정방법인 Newton-Raphson법을 적용하여 기하학적 정확도가 향상된 수치사진화상을 얻을 수 있었으며, DCS 420 디지털 카메라와 윈도우 운영체계인 Visual basic 6.0을 이용하여, 표면 거칠기 측정시스템을 구축함으로써 연마이전 조경석과 연마이후 조경석에 대한 표면 거칠기 및 형상을 정밀 측정할 수 있는 수치근접사진측량기법을 제시할 수 있었다.