• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.554-557
• /
• 2002

In this paper, PDP driving circuit is designed to show the pattern of still-image with ADS (Address Display Separation) driving method. The designed circuits consist of three stages which are the image processing program, digital logic parts, and power circuits. The Image processing program is designed serial-communication with RS-232C using BASIC language. Digital logic parts design ADS driving signals with Xilinx FPGA and are simulated by ModelSim 5.5f. Power circuits convert output of digital logic parts into high voltage which panel is drived.

• Progress in Superconductivity
• /
• 제9권2호
• /
• pp.157-161
• /
• 2008

Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.355-358
• /
• 1987

A design of digital position control system with DC Motor is presented. The digital position control system is constructed by power circuits, interface circuits and control circuits using single chip microprocessor (8096). All control functions are implemented on the 16 bit micro-processor requiring only on incremental encoder for speed and position sensing. The control schemes are used by the proportional control for some modifications and braking algorithms. This digital position system offered to the fast response, good steady-state accuracy, flexibility and reliability, Hardware, software features and experimental results of this system are described.

• 한국정보통신학회논문지
• /
• 제12권5호
• /
• pp.893-899
• /
• 2008

본 논문에서는 C++기반 동작 레벨 회로 시뮬레이션 프로그램인 CPPSIM을 이용하여 전압 조절기와 PLL을 구현하고 시뮬레이션 하였다. 아날로그 회로를 C++코드로 모델링 후 시뮬레이션을 통해 시뮬레이션 툴의 유효성을 살펴보았으며, 아날로그 회로의 단계별 설계와 가능성을 타진하였다. 시뮬레이션 결과 회로의 동작 레벨에서의 설계가능성을 검증할 수 있었다. 또한 PLL을 디지털 신호기반으로 구현하여 아날로그 회로의 디지털화를 시도하였다.

• 컴퓨터교육학회논문지
• /
• 제10권6호
• /
• pp.11-18
• /
• 2007

본 논문에서 구현된 논리회로 가상실험실은 원리이해를 위한 개념학습실과 가상 디지털 키트에 의한 가상실험실의 두 단계로 설계하였다. 개념학습실에서 학습자는 디지털 논리회로에 대한 중요한 원리나 의미를 쉽게 이해할 수 있도록 하였다. 가상실험실에서는 가상 브레드보드에서 회로를 결선하여 입력전압을 인가하여 출력신호를 측정한 다음 가상실험데이터와 비교하여 서버로 전송한다. 가상실험실에서 수행된 모든 실험활동은 데이터베이스에 저장되어 개인정보와 함께 예비보고서의 형태로 제공되어 교수자는 학습자가 얼마나 회로동작에 대해 잘 이해하였는가를 점검할 수 있도록 하였다. 마지막으로 제안된 가상실험시스템의 유효성을 입증하기 위해 한 학기 동안 실험 중에 발생한 실제 장비의 파손율과 학생들의 성취도를 5개의 설문을 통해 조사하여 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3112-3114
• /
• 2000

Recently. internet applications for efficient cyber education have drawn much interests. The world-wide web provides new opportunities for cyber education over the internet. In this paper, we developed the internet-based educational simulator for design and virtual experiment of the digital logic circuits. The proposed simulator provides the improved learning methods which can enhance the educational efficiency in digital theory. If the students execute the Digital simulator on the web. they can simulate in digital circuits through simple mouse manipulation. The proposed digital simulator can be used so that the students can easily understand the well-known digital principles.

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.193-197
• /
• 2017

본 논문에서는 델타 시그마를 이용하여 고분해능의 주파수 튜닝 범위를 가지는 저전력 디지털 주파수 합성기를 제안한다. 의료 기기용 센서 장치는 배터리 사용 시간의 제약으로 인해 저전력, 고성능 RF (Radio Frequency) 트랜시버를 필요로 한다. 반도체 공정의 미세화로 인한 디지털 회로 설계 기법의 발전으로, 이전의 아날로그 회로 설계의 한계를 극복하고, 고성능의 집적화가 가능해 지고 있다. 따라서, 전력 소모를 줄이기 위해 디지털 회로 기반의 주파수 합성기를 설계했다. 높은 주파수 분해능을 가지기 위해 델타 시그마 변조기를 링 발진기에 적용하여, 소수부 튜닝을 구현했다. 모의실험을 통해 제안된 구조가 전력 및 분해능에서 우수한 성능을 보임을 확인하였다.

• 조명전기설비학회논문지
• /
• 제27권9호
• /
• pp.15-22
• /
• 2013

A new LED lamp driving technology with a charge pump instead of a conventional DC-DC converter is proposed. The proposed driving technology is used to control the LED lamp with digital dimming. The power loss in the zener diodes is reduced because the charging process of the capacitors is selectively controlled according to the digital control signal. From the experimental results, when dimming four LED lamps simultaneously, the average driving circuit efficiency of 89% is obtained, regardless of the dimming level. White light with color temperature over a range of 2800~7200K was produced by dimming control of red, green, blue and amber LED lamps with the proposed driving circuit. The characteristics of the driving circuits can be changed depending on the characteristics of the R, G, B, and A LED lamps. The efficiency of the driving circuits up to a maximum 89% can also be obtained depending on the combination of LED lamps. The driving technology with digital dimming control for LED lamps proposed in this paper would be effective for obtaining high efficiency in LED driving circuits and remote control of LED lamps using digital communications.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.847-850
• /
• 1998

One of the most difficult problem of designing VLSI is a mixed-circuit design, that is to design circuit containing both analog parts and digital parts. Digital to analog converter and analog to digital converter is a typical case. Especially it can be a serious problem when mixed circuit are put into a large digital circuit like microcontroller. However nowadays this problem is settled by separating analog circuit parts outside the IC. This technique is based on converting a digital signal into a pulse sequence. Then an analog signal is obtained by averaging this pulse sequence at the external low-pass filter. An anlog to digital converter is designed using a stochastic logic instead of a traditional PWM (pulse-width modulation) signal and ins implemente dusing FPGa. Stochastic pulse sequence can be made as a simple circuits and moreover can be mathematically processed by simple circuits -AND gates. The spectral property of stochastic pulse sequence method is better than that of PWM method. So it make easy to design a external low-pass filter. This technique has important advantages, especially the reduction of the ADC cost.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.268-271
• /
• 2016

An efficient inductive switching noise suppression technique for mixed-signal integrated circuits (ICs) using standard CMOS digital technology is proposed. The proposed design technique uses a parallel RC circuit, which provides a damping path for the switching noise. The proposed design technique is used for designing a mixed-signal circuit composed of a ring oscillator, a digital output buffer, and an analog noise sensor node for $0.13-{\mu}m$ CMOS digital IC technology. Simulation results show a 47% reduction in the on-chip inductive switching noise coupling from the noisy digital to the analog blocks in the same substrate without an additional propagation delay. The increased power consumption due to the damping resistor is only 67% of that of the conventional source damping technique. This design can be widely used for any kind of analog and high frequency digital mixed-signal circuits in CMOS technology