• 한국표면공학회지
• /
• 제28권3호
• /
• pp.133-141
• /
• 1995

The deposition characteristics of diamond films were investigated for three different substrates : Si, Inconel 600 and steel. Diamond films were prepared by microwave plasma CVD method using $CH_4$, $H_2$ and $O_2$ as reaction gases. The deposited films were analyzed with SEM, Raman spectroscopy and ellipsometer. For Si substrate, diamond films were successfully obtained for most of the deposition conditions used in this study. As the $CH_4$ flow rate decreased and the $O_2$ flow rate increased, the quality of the film was improved due to the reduced non-diamond phase in the film. For Inconel 600 substrate, the surface pretreatment with diamond powders was required to deposit a continuous diamond film. The films deposited at temperatures of $600^{\circ}C$ and $700^{\circ}C$ had mainly diamond phase, but they were peeled off locally due to the difference in the thermal expansion coefficient between the substrate and the deposited films. The films deposited at $500^{\circ}C$ and $850^{\circ}C$ had only the graphitic carbon phase. For steel substrate, all of the films deposited had only the graphitie carbon phase. We speculated that the formation of diamond nuclei on the steel substrate was inhibited due to the diffusion of carbon atoms into the steel substrate which has a large amount of carbon solubility.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.1137-1144
• /
• 2009

창의력[創意力] 즉, 새로운 것을 생각해 내는 능력은 디자이너 모두가 추구하는 것이다. 하지만 사실 독창적이라는 것은 절대적으로 새로운 것만은 아니다. 특히 정보공유, 정보보급의 현 시대에 있어 작품의 창작은 공유된 모든 것을 재구축하고 그것을 작가 자신의 무엇인가 새로운 것과 관련짓는 것이기 때문에 새로운 디자인이란 독창적인 것이 아니라 재편성된 것이라고 할 수 있다. 또한 디자이너들이 각기 다른 아이디어를 창출할 수 있다는 것은 개개인이 가지고 있는 지식체계가 다르기 때문이다. 이로 볼 때 자신의 고유지식체계의 특징과 한계를 정확히 파악하여 동화(同化)와 변형의 과정에서 어떤 새로운 것과 관련짓는 능력을 높여 줄 수 있는 디자인 사고확산방안을 모색하는 것은 디자이너에게 있어 매우 중요한 과제라고 할 수 있다. 따라서 효율적인 인지활동을 위한 디자인사고확산방법을 모색해 볼 필요가 있다. 본 연구는 인간의 지식을 설명함에 있어 인지과학에서 사용되는 한 가지 방법으로의 의미 네트워크(semantic network)라는 구조화 수법의 개념을 응용하여 이에 대응하는 디자인 발상법과 그 디자인 발상법을 토대로 한 디자인사고 확산방법을 제시하고자 하였으며, 연구에서 창출된 디자인사고 발상법과 확산법을 정리 분류하고 융통성 있게 조합 변용함으로써 각 확산법의 우점을 더욱더 활발히 하는 동시에 각 확산방법들에 존재하는 한계를 극복하여 더욱더 효과적인 디자인사고를 할 수 있는 방법을 모색해보았다. 본 연구는 각 발상법을 사용한 후 더 이상 노드를 연결해 나갈 수 없을 때에는 확산법을 사용하여 지속적인 디자인 사고를 하게 하며, 조건점을 다양화하고 활성화하여 고유 사고방식을 탈피함으로써 효율적인 디자인 사고를 하게 한다. 따라서 네트워크원리를 응용한 디자인 사고확산방안의 제안은 동화(同化)와 변형의 과정에서 어떤 새로운 것과 관련짓는 능력을 높여 준다는 점에서 그 연구의 의의가 있다.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.238-248
• /
• 2019

In the high-temperature and high-pressure irradiation environments, the multi-field coupling processes of hydrogen diffusion, hydride precipitation and mechanical deformation in Zircaloy cladding tubes occur. To simulate this hydrogen-induced complex behavior, a multi-field coupling method is developed, with the irradiation hardening effects and hydride-precipitation-induced expansion and hardening effects involved in the mechanical constitutive relation. The out-pile tests for a cracked cladding tube after irradiation are simulated, and the numerical results of the multi-fields at different temperatures are obtained and analyzed. The results indicate that: (1) the hydrostatic stress gradient is the fundamental factor to activate the hydrogen-induced multi-field coupling behavior excluding the temperature gradient; (2) in the local crack-tip region, hydrides will precipitate faster at the considered higher temperatures, which can be fundamentally attributed to the sensitivity of TSSP and hydrogen diffusion coefficient to temperature. The mechanism is partly explained for the enlarged velocity values of delayed hydride cracking (DHC) at high temperatures before crack arrest. This work lays a foundation for the future research on DHC.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.966-970
• /
• 2011

The thermo-mechanical interaction between brake block and wheel tread during braking has been found to cause thermal crack on the wheel tread. Due to thermal expansion of the rim material, the thermal cracks will protrude from the wheel tread and be more exposed to wear during the wheel/block contact than the rest of the tread surface. The wheel rim is in residual compression stress when is new. After service running, the region in the tread has reversed to tension. This condition can lead to the formation and growth of thermal cracks in the rim which can ultimately lead to premature failure of wheel. In the present paper, the thermal cracks of railway wheel, one of severe damages on the wheel tread, were evaluated to understand the safety of railway wheel in running condition. The residual stresses for damaged wheel which are applied to tread brake are investigated. Mainly X-ray diffusion method is used. Under the condition of concurrent loading of continuous rolling contact with rails and cyclic frictional heat from brake blocks, the reduction of residual stress is found to correlate well with the thermal crack initiation.

• 무역상무연구
• /
• 제60권
• /
• pp.213-234
• /
• 2013

e-Trade 3.0 era which means the expansion of seamless e-Trade process into global business has been come. e-Trade is in the evolution stage with the reflection of time changes and IT development. Furthermore e-Trade marketing method of SMEs has been generalized. However, SMEs have not utilized e-Trade marketing very actively even if it has much benefits in exploring overseas marketing. In this regard this paper has cautiously suggested the strategic using plan of e-Marketplace and SNS along with policy improvement in order to promote extensive diffusion of e-Trade marketing. First of all, a comprehensive evaluation system has to be developed for the assessment of overseas marketing program and provide organized guideline including SMEs support system. Also e-Marketplace operation company is necessary to invent management system for supervising and detecting risk factors of participating firms and business model to share information which each e-Marketplace possesses through mutual connection. Finally, the effective supports such as short-term education and acting operation of initial account to use SNS strategically are needed and continuous contents development to adopt SNS is absolute.

• 보건행정학회지
• /
• 제14권2호
• /
• pp.99-116
• /
• 2004

This study estimates the determinants of national health expenditures of OECD countries using panel regression method. The data used are OECD Health Data(2003) covering 33 countries and from 1970 to 2001. This study shows several important different results compared to the previous studies. Further this study estimates the determinants of Korean case using data from 1m to 2000, and compare with the results of OECD panel. The main findings are as follows. The income elasticity of health expenditures is estimated below 1.0, but is shown above 1.0 when the different health systems of each country are controlled. The women's labor participation influences strongly positive effect on the health expenditures. The diffusion of new technologies is positively related with the increasing expense. The increasing government expenditures have a tendency not to contain health expenses, but to increase expenses. The expansion of public health insurance holders is containing the expenses, and the increasing number of doctors is pushing expenditures. This implies the health expenditures are influenced more by the induced demand of providers rather than the moral hazard of patients. However, the above result is opposite in Korean case. The existence of primary care doctors affects slightly up warding rather than containing expenditures. Finally the determinants are seriously depending upon which factors are included in the model and which statistical model is chosen. Therefore it must be cautious to interpret the results of statistical model.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.694-699
• /
• 2002

In autobody assembly, thin-wall, tubular connections have been used for the frame structure. Recent interest in light materials, such as aluminum or magnesium alloys, has been rapidly growing for weight reduction and fuel efficiency. Due to higher thermal expansion coefficient, low stiffness/strength, and low softening temperature of aluminum and magnesium alloys, control of welding-induced distortion in these connections becomes a critical issue. In this study, the material sensitivity to welding distortion was investigated using a T-tubular connection of three types materials; low carbon steel (A500 Gr. A), aluminum alloy (5456-H116) and magnesium alloy (AZ91C-T6). An uncoupled thermal and mechanical finite element analysis scheme using the ABAQUS software program was developed to model and simulate the welding process, welding procedure and material behaviors. The predicted angular distortions were correlated to the cumulative plastic strains. A unique relationship between distortion and plastic strains exists for all three materials studied. The amount of distortion is proportional to the magnitude and distribution of the cumulative plastic strains in the weldment. The magnesium alloy has the highest distortion sensitivity, followed by the other two materials with the steel connection having the least distortion. Results from studies of thin-aluminum plates show that welding distortion can be minimized by reducing the cumulative plastic strains by preventing heat diffusion into the base metal using a strong heat sink placed directly beneath the weld. A rapid cooling method is recommended to reduce welding distortion of magnesium tubular connections.

• Nuclear Engineering and Technology
• /
• 제25권1호
• /
• pp.20-27
• /
• 1993

이 논문은 가압경수로의 노심내 핵연료 관리용 탐색코드를 개발하기 위한 것이다. 이 목적으로 점반응도모형을 사용하여 핵연료주기 결정을 위한 FCYPRM코드를 제작하였고, 수정형 Borresen의 소격확산모형과 노달전개법에 의한 중성자 공간 해석용 CMSNAP코드를 개발하였다. 또한 수치 실험을 통하여 일련의 경험칙을 수립하고 이들을 이용하여 재장전노심 핵연료집합체 배치코드로서 ALPS코드를 개발하였다. 수치계산결과를 예시함으로서 개개 코드들의 유용성과 응용성을 입증하였으며, 이들 코드들을 가압경수로의 재장전노심 설계문제를 해결하기 위한 코드로 합성, 응용함으로서 상기 코드들이 효과적인 탐색코드가 될 수 있음을 보였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권4호
• /
• pp.139-143
• /
• 2006

Recently, standard of living improved and Information-Communication industry developed rapidly. Thereby, interest about electric power quality is rising worldwide. So, research and Development to enhance electric power quality in various viewpoint until most suitable supply system from each kind device to improve electric power quality. And specially, interest about voltage quality is rising by diffusion increase of information communication appliance and minuteness control appliance etc. Also Power consumption is increasing, but expansion of large size generator by environmental and site security problem is difficult. So, introduction of distribution generation is investigated actively by electric-power industry reorganization. Voltage management of power system had been controlled by ULTC (Under Load Tap Changer) in substation and pole transformer on the high voltage distribution line. But, voltage control device on substation and distribution line is applied each other separatively. Therefore, efficiency of line voltage control equipment is dropping. Also, research about introduction upper limit of distribution generation is consisting continuously. This paper presents cooperation use way between voltage control device and introduction upper limit of distribution generation for most suitable voltage control in distribution power system.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2230-2245
• /
• 2023

KANT (KAIST Advanced Nuclear Tachygraphy) is a PWR core simulator recently developed at Korea Advance Institute of Science and Technology, which solves three-dimensional steady-state and transient multigroup neutron diffusion equations under Cartesian geometries alongside the incorporation of thermal-hydraulics feedback effect for multi-physics calculation. It utilizes the standard Nodal Expansion Method (NEM) accelerated with various Coarse Mesh Finite Difference (CMFD) methods for neutronics calculation. For thermal-hydraulics (TH) calculation, a single-phase flow model and a one-dimensional cylindrical fuel rod heat conduction model are employed. The time-dependent neutronics and TH calculations are numerically solved through an implicit Euler scheme, where a detailed coupling strategy is presented in this paper alongside a description of nodal equivalence, macroscopic depletion, and pin power reconstruction. For validation of the steady, transient, and depletion calculation with pin power reconstruction capacity of KANT, solutions for various benchmark problems are presented. The IAEA 3-D PWR and 4-group KOEBERG problems were considered for the steady-state reactor benchmark problem. For transient calculations, LMW (Lagenbuch, Maurer and Werner) LWR and NEACRP 3-D PWR benchmarks were solved, where the latter problem includes thermal-hydraulics feedback. For macroscopic depletion with pin power reconstruction, a small PWR problem modified with KAIST benchmark model was solved. For validation of the multi-physics analysis capability of KANT concerning large-sized PWRs, the BEAVRS Cycle1 benchmark has been considered. It was found that KANT solutions are accurate and consistent compared to other published works.