• Advances in nano research
• /
• 제12권4호
• /
• pp.353-363
• /
• 2022

This paper presents an investigation about superharmonic and subharmonic resonances of a carbon nanotube reinforced composite beam subjected to lateral harmonic load with damping effect based on the modified couple stress theory. As reinforcing phase, three different types of single walled carbon nanotubes (CNTs) distribution are considered through the thickness in polymeric matrix. The governing nonlinear dynamic equation is derived based on the von Kármán nonlinearity with using of Hamilton's principle. The Galerkin's decomposition technique is utilized to discretize the governing nonlinear partial differential equation to nonlinear ordinary differential equation and then is solved by using of multiple time scale method. Effects of different patterns of reinforcement, volume fraction, excitation force and the length scale parameter on the frequency-response curves of the carbon nanotube reinforced composite beam are investigated. The results show that volume fraction and the distribution of CNTs play an important role on superharmonic and subharmonic resonances of the carbon nanotube reinforced composite beams.

• Geomechanics and Engineering
• /
• 제29권6호
• /
• pp.667-681
• /
• 2022

This paper presents a thermoelastic analysis of variable thickness plates made of functionally graded materials (FGM) subjected to mechanical and thermal loads. The thermal load is applied to the plate as a temperature difference between the top and bottom surfaces. Temperature distribution in the plate is obtained using the steady-state heat equation. Except for Poisson's ratio, all mechanical properties of the plate are assumed to vary linearly along the thickness direction based on the volume fractions of ceramic and metal. The plate is resting on an elastic foundation modeled based on the Winkler foundation model. The governing equations are derived based on the third-order shear deformation theory (TSDT) and are solved numerically for various boundary conditions using the differential quadrature method (DQM). The effects of various parameters on the stress distribution and deflection of the plate are investigated such as the value of thermal and mechanical loads, volume fractions of ceramic and metal, and the stiffness coefficients of the foundation.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.13-19
• /
• 2016

Purpose: In this study, we examined outdoor air fraction using historical data of actual Air Handling Unit (AHU) in the existing building during intermediate season and analyzed optimal outdoor air fraction by control types for economizer. Method: Control types for economizer which was used in analysis are No Economizer(NE), Differential Dry-bulb Temperature(DT), Diffrential Enthalpy(DE), Differential Dry-bulb Temperature+Differential Enthalpy(DTDE), and Differential Enthalpy+Differential Dry-bulb Temperature (DEDT). In addition, the system heating and cooling load were analyzed by calculating the outdoor air fraction through existing AHU operating method and control types for economizer. Result: Optimized outdoor air fraction through control types was the lowest in March and distribution over 50% was shown in May. In case of DE control type, outdoor air fraction was the highest of other control types and the value was average 63% in May. System heating load was shown the lowest value in NE, however, system cooling load was shown 1.7 times higher than DT control type and 5 times higher than DE control type. For system heating load, DT and DTDE is similar during intermediate season. However, system cooling load was shown 3 times higher than DE and DEDT. Accordingly, it was found as the method to save cooling energy most efficiently with DE control considering enthalpy of outdoor air and return air in intermediate season.

• The Plant Pathology Journal
• /
• 제17권6호
• /
• pp.387.2-387
• /
• 2001

• 한국강구조학회 논문집
• /
• 제16권1호통권68호
• /
• pp.81-89
• /
• 2004

구조물과 같은 아치의 진동해석은 많은 산업분야에서 다양하게 적용되기 때문에 공학적 문제에 중요한 주제이다. 특히 변화하는 단면형상을 가지는 아치는 질량이나 강도를 최적화 하거나 특별한 구조물이나 요구조건들을 만족하기 위해서 폭넓게 사용되어 진다. 최근에는 일반화 미분구적법(GDQM)이나 미분변환법(DTM)은 각각 Shu와 Zou에 의해서 제안이 되었다. 연구에서는 변화하는 단면형상을 가지는 아치의 진동해석이 일반화 미분구적법과 미분변환법을 적용하였다. 변화하는 단면형상을 가지는 아치에 대하여 지배방정식이 유도되어졌으며, 미분변환과 일반화 미분구적법의 개념이 간단히 소개되었다. 변화하는 단면형상을 가지는 아치의 무차원화된 고유진동수가 다양한 경계조건에 대해서 구해졌으며, 이러한 방법들에 의해서 얻어지는 결과들은 선행연구와 비교 되어졌다. 일반화 미분구적법과 미분변환법은 변화하는 단면형상을 가지는 아치의 진동문제를 해석함에 있어서 빠른 수렴, 정확도, 효율성, 유효성을 보인다.

• 한국수학사학회지
• /
• 제13권1호
• /
• pp.1-14
• /
• 2000

The first part of this thesis discusses the Pearson's Curve Family which gives $\beta$distribution, $\Gamma$-distribution, $X^2$-distribution and t-distribution. The second part of this thesis gives some brief process of calculations for normal distribution density and t-distribution density by the 7-th type Curve of Pearson's Curve Family. Finally, a conclusion arrives that Student(Gosset) could not find out his famous 'Student's t-distribution' without his attending of 'Pearson's Differential Equation' class taught by Pearson himself when he was a senior student. However, if he had got a professorship at the Pearson Statistics Laboratory, the University of London, then he could not have found 'Student's t-distribution' for small sampling technique of modern statistics.

• 한국콘텐츠학회논문지
• /
• 제21권5호
• /
• pp.465-476
• /
• 2021

이 연구는 불법 성콘텐츠 접촉과 불법 성콘텐츠 유통의 그 원인요인들 및 통제요인들을 제시하고 그 요인들 간의 상호작용효과를 각각 살펴보고 비교하였다. 원인요인으로는 낮은 자기통제력, 불법 성콘텐츠 경험 친구, 그리고 가부장가정 요인을, 그리고 통제요인들로는 도덕태도, 공식처벌, 기회제약을 다뤘다. 그리고 세 원인요인들의 영향에 대한 세 통제요인들의 조절 혹은 완충효과를 살펴보았다. 서울시 대학생을 조사대상으로 하는 분석결과 대체로 불법 성콘텐츠 접촉과 불법 성콘텐츠 유통에서 그 원인요인들의 작용은 유사해 낮은 자기통제력, 불법 성콘텐츠 경험 친구, 그리고 가부장가정 모두가 크게 유의미했고 그 중에서도 불법 성콘텐츠 경험 친구와의 접촉의 영향력이 가장 컸다. 불법 성콘텐츠 접촉 및 유통에 대한 원인요인들과 통제요인들의 상호작용효과에 대한 결과를 보면 그 결과가 상이했다. 불법 성콘텐츠 접촉의 경우 원인요인들과 통제요인들과의 상호작용효과가 모두 유의미하지 않았다. 즉 불법 성콘텐츠 접촉에서는 원인요인 모두가 독립적으로만 유의미하게 작동했으며 그 작용을 어떠한 통제요인들도 통제하지 못했다. 그러나 불법 성콘텐츠 유통의 경우는 낮은 자기통제력과 도덕태도간의 상호작용효과, 불법 성콘텐츠 유통 친구와 도덕태도간의 상호작용효과가 유의미했고, 가부장가정과 공식처벌간의, 그리고 가부장가정과 기회제약간의 상호작용효과가 유의미했다. 그 결과의 함의를 논의한다.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.729-737
• /
• 2013

콘크리트 포장의 환경하중은 온도하중과 수분하중으로 구분할 수 있으며, 이는 콘크리트 슬래브 내의 온도분포와 건조수축 및 크리프를 의미한다. 본 연구에서는 공항 콘크리트 포장의 역학적 설계에 필요한 환경하중을 산정할 수 있는 방법을 개발하였다. 먼저, 대상 지역과 설계 슬래브 두께를 결정한 후, 포장 온도 예측 프로그램을 사용하여 예측된 슬래브 깊이에 따른 콘크리트 온도분포를 등가선형 온도차이로 환산하였다. 기존 건조수축 예측 모형을 개선하여 지역별 상대습도를 고려하여 콘크리트의 건조수축을 예측한 후 부등건조수축 등가선형 온도차이로 환산하였다. 또한, 응력이완을 건조수축에 반영하였다. 결국, 온도에 의한 등가선형 온도차이와 수분에 의한 부등건조수축 등가선형 온도차이를 합하여 최종 환경하중인 총 등가선형 온도차이를 산정하였다. 적용 예를 보이기 위해 지역별 기상조건을 대표할만한 국내 민간공항 8곳 및 군공항 2곳의 환경하중을 본 연구에서 개발된 방법으로 계산하고 비교하였다.

• 한국식물병리학회지
• /
• 제11권3호
• /
• pp.238-244
• /
• 1995

Severity of panicle blast disease on the leading cultivars of rice was investigated at nine locations of Korea during summer in 1993 with frequent raining and low temperature conditions. Incidence of panicle blast was 26% on Jinmibyeo, 23% on Chuncheongbyeo and 40% on Odaebyeo. Race distribution of Pyricularia grisea was examined from 1993 to 1994. A total of 1,098 isolates of the fungus obtained from the blast nurseries and framers; fields were screened using Korean differential varieties. Twenty one races were identified in 1993 and 19 races in 1994. KI-181, KJ-103, KJ-104, KI-241 and KI-209 were identified as new races, and KJ-301 (15%), KJ-201 (13%), KJ-105 (12%) and KI-409 (12%) were major races during 1993 and 1994. Race KI-197, which has a wide spectrum of virulence on rice cultivars, was isolated in a ratio of 8.3% and evenly distributed in the whole country. Some of the major and newly identified races during 1993∼1994 were used for spray-inoculation on leading cultivars and differential varieties in a greenhouse. We found that most of the cultivars were resistant to the major races, KJ-301 and KI-409, but were very susceptible to the new races, KI-241, KI-209, KI-181 and KJ-103.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권4호
• /
• pp.263-269
• /
• 2012

The ability to characterize feature objects from radar readings is often limited by simply looking at their still frame reflectivity, differential reflectivity and differential phase data. In many cases, time-series study of these objects' reflectivity profile is required to properly characterize features objects of interest. This paper introduces a novel technique to automatically track multiple 3D radar structures in C,S-band in real-time using Doppler radar and profile their characteristic reflectivity distribution in time series. The extraction of reflectivity profile from different radar cluster structures is done in three stages: 1. static frame (zone-linkage) clustering, 2. dynamic frame (evolution-linkage) clustering and 3. characterization of clusters through time series profile of reflectivity distribution. The two clustering schemes proposed here are applied on composite multi-layers CAPPI (Constant Altitude Plan Position Indicator) radar data which covers altitude range of 0.25 to 10 km and an area spanning over hundreds of thousands $km^2$. Discrete numerical simulations show the validity of the proposed technique and that fast and accurate profiling of time series reflectivity distribution for deformable 3D radar structures is achievable.