• Journal of applied mathematics & informatics
• /
• 제27권1_2호
• /
• pp.441-452
• /
• 2009

In this paper, a fifth order numerical method is presented for solving singularly perturbed differential-difference equations with negative shift. In recent papers the term negative shift has been using for delay. Similar boundary value problems are associated with expected first exit time problem of the membrane, potential in models for neuron and in variational problems in control theory. In the numerical treatment for such type of boundary value problems, first we use Taylor approximation to tackle terms containing small shifts which converts it to a boundary value problem for singularly perturbed differential equation. The two point boundary value problem is transformed into general first order ordinary differential equation system. A discrete approximation of a fifth order compact difference scheme is presented for the first order system and is solved using the boundary conditions. Several numerical examples are solved and compared with exact solution. It is observed that present method approximates the exact solution very well.

• 한국의류산업학회지
• /
• 제4권4호
• /
• pp.394-398
• /
• 2002

The purse of this study was to invesigate the dyeing fastness on extract of bufferbur leaf princeps. The experimental items were divided into the mordant treatment, component of fabric and kind of mordants. The experimental study was done by laundering, abrasion (dry/wet), perspiration (acid/alkali), light, iron fastness test and color difference by C.C.M system. The summerized finding resulted from experiments and investigation are suggested as follows : In the C.C.M test on mordanting method and kind of fabric, color difference of silk was three times higher than cotton. The silk fabric was the highest in simultaneous mordant treatment but cotton fabric was the highest in none mordant. In color difference analysis on 6 mordants, that of silk and cotton was significantly improved when mordants was treatmented. Especially color difference of Fe and Cu mordanting treatment was higher than Cr, Sn, Al and none. In dyeing fastness on mordants laundering, perspiration, abrasion and iron fastness showed 4-5 grade but light-fastness showed 1-3 grade.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.383-392
• /
• 2009

The static and dynamic analyses of simply supported beams are studied by using the U-transformation method and the finite difference method. When the beam is divided into the mesh of equal elements, the mesh may be treated as a periodic structure. After an equivalent cyclic periodic system is established, the difference governing equation for such an equivalent system can be uncoupled by applying the U-transformation. Therefore, a set of single-degree-of-freedom equations is formed. These equations can be used to obtain exact analytical solutions of the deflections, bending moments, buckling loads, natural frequencies and dynamic responses of the beam subjected to particular loads or excitations. When the number of elements approaches to infinity, the exact error expression and the exact convergence rates of the difference solutions are obtained. These exact results cannot be easily derived if other methods are used instead.

• 지질공학
• /
• 제33권2호
• /
• pp.229-240
• /
• 2023

연약지반 개량공사 시 계측기를 설치하여 경제적이고 안전한 시공이 이루어지도록 관리한다. 데이터 분석 시 시간에 따른 침하량 데이터를 활용하여 전체적인 지반 침하 거동을 파악할 수 있지만, 계측지점 간 상호관련성을 분석하기에는 어려움이 있다. 따라서 계측지점 간의 상대적인 압밀침하 거동을 분석하기 위하여, 침하량과 속도를 가공하여 평균 침하량 차이 지수와 기울기 차이 지수로 정의한 후, 평균 침하량 차이 지수 - 기울기 차이 지수(AS_i,j-SDI_i,j) 좌표계에 도시하였다. 계측지점 간 상대적인 압밀침하 거동 분석결과 평균 침하량 차이 지수 - 기울기 차이 지수 좌표계에 나타낸 계측지점 간의 관계가 압밀이 완료됨에 따라 영역 1로 이동하였다. 관측점의 이동 경로를 해당 좌표계에 연속적으로 나타냄으로써 계측지점 간의 상대적인 압밀침하 거동관계를 분석하였으며, 이동경로 방향에 따라 두 계측지점의 압밀침하 거동관계가 안정한 상태인지 불안정한 상태인지 확인할 수 있었다.

• Journal of Astronomy and Space Sciences
• /
• 제29권1호
• /
• pp.1-10
• /
• 2012

In this study, global positioning system (GPS)-derived precipitable water vapor (PWV) and microwave radiometer (MWR)-measured integrated water vapor (IWV) were compared and their characteristics were analyzed. Comparing those two quantities for two years from August 2009, we found that GPS PWV estimates were larger than MWR IWV. The average difference over the entire test period was 1.1 mm and the standard deviation was 1.2 mm. When the discrepancies between GPS PWV and MWR IWV were analyzed depending on season, the average difference was 0.7 mm and 1.9 mm in the winter and summer months, respectively. Thus, the average difference was about 2.5 times larger in summer than that in winter. However, MWR IWV measurements in the winter months were over-estimated than those in the summer months as the water vapor content got larger. The results of the diurnal analysis showed that MWR IWV was underestimated in the daytime, showing a difference of 0.8 mm. In the early morning hours, MWR IWV has a tendency to be over-estimated, with a difference of 1.3 mm with respect to GPS PWV.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.48-57
• /
• 2008

The research analyzed the distribution of the indoor temperatures of a radiant floor cooling system through mock-up experiments. It investigated the temperature difference of feed water, the vertical temperature difference of indoor air, the temperature difference of floor surface, and so on. The following is the results of the research. First, the research shows that the difference between indoor temperature and outside temperature was the smallest when the temperature of feed water was set at 16$^{\circ}C$. In addition, the temperature changes according to indoor positions (wall, room, floor, and ceiling) were the most uniform. Thus, the research found that the cold water temperature of 16$^{\circ}C$ is the most proper. In addition, it confirmed that the feed water temperature of 18$^{\circ}C$ is effective because the temperature can lower the temperature of a room to 13.55$^{\circ}C$, which is lower than the temperature of a non-cooling mode. Second, an investigation on the temperature distribution of vertical air in indoor space shows that the temperature distribution had a difference of 0.2 to 1.9$^{\circ}C$ on the average, which satisfies the range of 3.0$^{\circ}C$ in the standard of ISO.

• 설비공학논문집
• /
• 제29권4호
• /
• pp.202-211
• /
• 2017

In this study, the exergy that can be reflected in the energetic and economic values was used to assess the heat tariff of a district heating (DH) system instead of the enthalpy. It is difficult to directly apply the exergy to the current heat-charge system because of the complicated calculation; therefore, the difference between the supply and return temperatures was converted to the exergy-temperature difference for the ease of the heat-amount calculation. As a result of the exergy analysis for a DH substation, the exergy-temperature difference did not affect the surrounding temperature and pressure loss. The supply temperature and the maximum difference between the supply temperature and the return temperature exerted the main effect on the exergy-temperature difference. The new heat charge of a DH user was slightly reduced in winter compared with the previous charge, but the heat charges in the other seasons are almost the same. It is concluded from the assessment of the heat tariff for which the exergy is used that this tariff is more feasible for both DH suppliers and consumers compared with enthalpy.

• 대한가정학회지
• /
• 제35권3호
• /
• pp.101-113
• /
• 1997

The purpose of this study was to investigate family system types, self-differentiation and psychological well-being of adolescent. The subjects were 248 male and 241 female students selected from 3 universities' freshmen to seniors. The instruments of measurement were the FACES Ⅲ, Self-Differentiation Scale and Well-Being and Life Satisfaction Scale. SAS program was used for data analysis, and the data analysis, and the data were verified by frequency, one-way ANOVA and multiple Regression. The main results of this study were summarized as follows: 1. There was a significant difference in psychological well-being of adolescent according to family system types. Adolescents of balanced families had the most psychological well-being. 2. There was a significant difference in self-differentiation of adolescent according to family system types. Adolescents of balanced families had the most self-differentiation. 3. There was a significant difference in psychological well-being of adolescent according to self-differentiation. The more th degree of self-differentiation is high, the more the psychological well-being is high. 4. The self-differentiation is the most significant factor of influence on psychological well-being of adolescent.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권6호
• /
• pp.2513-2533
• /
• 2018

In cognitive radio technology, the overall efficiency of communications systems can be improved without allocating additional bands by allowing a secondary system to utilize the licensed band when the primary system, which has the right to use the band, does not use it. In this paper, we propose a fast and reliable common channel initialization protocol without any exchange of initialization messages between the cluster head and the member nodes in cognitive ad-hoc networks. In the proposed method, the cluster and member nodes perform channel-based spectrum sensing. After sensing, the cluster head transmits a system activation signal through its available channels with a predetermined angle difference pattern. To detect the cluster head's transmission channels and to join the cluster, each member node implements fast Fourier transform (FFT) and computes autocorrelation for the angle difference sequence of the received signal patterns. This is compared to the predetermined reference angle difference pattern. The join-request and channel-decision procedures are presented in this paper. Performance evaluation of the proposed method is presented in the simulation results.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3104-3109
• /
• 2009

정보수집용 ELINT 장비에서 전파의 방위를 정확하게 찾는 기술은 매우 중요하다. 신호도착 시간차(TDOA)를 이용하는 방위탐지 장치는 수신용 배열 안테나와 시간차 측정장치로 구성된다. TDOA 기술은 에미터 신호가 수신용 배열 안테나 시스템의 각각의 안테나에 도달하는 시간차를 계산하여 에미터의 방위를 산출하는 방법이다. TDOA 방식은 광대역 주파수에서 사용 가능하며 위상변별기나 주파수 측정기와 같은 복잡한 장치가 필요하지 않기 때문에 구성이 간단하다. 그러나 방위 탐지정확도를 높이기 위해서는 시간 측정 분해능이 좋아야하고 수신 안테나 배열간격이 길어야 한다. 본 논문에서는 실제 환경과 유사한 잡음을 고려한 환경에서 방위탐지 정확도를 모사하고 그 결과를 분석하였다.