• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1961-1965
• /
• 2003

The flow analysis is needed to verify the physical phenomena through interruption processes for improving the capacity and the reliability of gas circuit breakers. Moreover the small current interruption performance of GCBs could be predicted by coupling the flow characteristics with the electric field one. In this paper, the unsteady flow characteristics and the traveling trajectory are depicted with a commercial CFD code, PHOENICS, programmed for moving motion of objects. In order to validate computational results, the measured pressure data in cylinder and in front of arcing contact are compared with the test results of small current interruption.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1647-1650
• /
• 2003

The Objective of this work was to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that was asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSFIP elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was 16${\times}$8 array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue lift curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75(1.875kN) load level. SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.15-22
• /
• 1997

A 10Gbit/s limiting amplifier IC for optical transmission system was implemented with AlGaAs HBT (heterojunction bipolar transistor) technology. HBTs with 2x10.mu. $m^{2}$ and 6x20.mu. $m^{2}$ emitter size were used. The HBT structures are based on metal-organic chemical vapor deposition (MOCVD) epitxy and employ a mesa structure with self-aligned emitter/base and sidewall dielectric passivation. IC was designed to support differnetial input and output. Small signal performance of the packaged IC showed 26dB gain and $f_{3dB}$ of 8GHz. A single ouput has 800m $V_{p-p}$ swing with more than 26dB dynamic range. The performance of the limiting amplifier was verified through single mode fiber320km transmission link test.est.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.105-109
• /
• 2002

The short-term AC breakdown strength of laminated polypropylene insulating Paper (PPLP) has been studied for cold dielectric of high temperature superconductivity power cables. The design and operating conditions of the electrode system for studying of short-term breakdown strength of one-layer and multi-layer PPLP samples are discussed in liquid nitrogen(LN2) state. The influence of various operating factors (geometry and dimension of electrodes, speed of tested voltage, thickness of test sample) on the value of short-term AC breakdown strength at cryogenic temperature has been established.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.10a
• /
• pp.25-28
• /
• 2000

In this paper, the technology for accelerating degradation & life estimation on the traction motor was introduced with the stator form-winding sample coils of the 200 Class insulation system The accelerative degradation was performed in 10 cycles, which were composed of thermal stress, fast rising surge voltage, vibration, water immersion and overvoltage applying. After aging of 10 cycles, condition diagnosis test such as insulation resistance & polarization index, capacitance & dielectric loss and partial discharge properties were investigated in the temperature range of $20{\sim}160^{\circ}C$. Relationship between degradation conditions and diagnosis results were analyzed to find an dominative degradation factor at the end-life point

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.10a
• /
• pp.73-76
• /
• 2000

Traction motors that is one of the rotating machines for urban transit EMU have been subjected to increased demand for higher operating temperature, more demanding duty cycles, higher starting current, frequent voltage transients and severe environmental exposure. With the advent of PWM drives using power IGBTs in addition to the thermal considerations, it is important to take into account the impact of the dielectric stress upon the winding insulation system life. In analyzing the life of the stator winding, which is the heart of the motor, the majority of all winding failures are usually caused by a combination of various stresses acting on the insulation materials and system. In this paper, to evaluate the expected life of traction motor for urban transit E.M.U. it is proposed a new test method of complex accelerating degradation.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.108-111
• /
• 2003

The Objective of this work was to design Surface Antenna Structure (SAS) and investigate fatigue behavior of SAS that was asymmetric sandwich structure. This term, SAS, indicates that structural surface becomes antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, SSFIP elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.5 GHz and final demonstration article was $16\;{\times}\;8$ array antenna. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of SAS was obtained. The fatigue load was determined experimentally at a 0.75(1.875kN) load level. SAS concept is the first serious attempt at integration for both antenna and composite engineers and promises innovative future communication technology.

• Journal of Information Display
• /
• v.8 no.4
• /
• pp.19-22
• /
• 2007

A new front plate structure of ac-PDP using fence-type aluminum electrode coated with anodic aluminum oxide was investigated. In this structure, ITO and glass dielectric layer were eliminated and expensive Ag BUS electrode was replaced with aluminum. Test panels were prepared using the new structure and their luminance and discharge characteristics were examined. These results indicate that the new structure provide a new way of cost reduction and enhancement of performance of ac-PDPs

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1896-1898
• /
• 2002

In this paper, to developing thermally and mechanically upgraded ones, we dismounted pole transformers used in the fields for over 13 years and conducted aged oil analysis. Also, when the cellulose and aramid papers in test cell were aging with oil at $130^{\circ}C$ for 3000 hours, with the testing period cellulose paper deteriorated more rapidly than the others. For example dielectric strength and dissipation factor of papers deteriorated with aging time. For evaluation of thermal aging characteristics, a mineral oil-immersed transformer was constructed with hybrid insulation system comprised of aramid paper and cellulose insulation. A Hybrid system has economic advantages. Cellulose materials are confined to cooler regions of the transformer winding. And aramid papers are served to insulate contact parts of hot conductors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.106-106
• /
• 2010

AC PDP(Plasma Display Panel)는 상압에 가까운 압력에서 DBD(Dielectric Barrier Discharge) 방전을 이용한 디스플레이다. AC PDP는 보통 면 방전을 이용하기 때문에 대향 방전과는 다른 방전 현상을 보인다. 본 연구에서는 4인치 test 패널 제작하여 격벽 높이 변화에 따른 방전 현상을 연구하였다. PDP 셀은 $1mm^3$ 보다 작은 크기를 가지고 있기 때문에 방전 현상을 분석하는 것은 쉽지 않다. 그래서 이 연구에서는 2, 3차원 유체 시뮬레이션을 이용하여 실험 결과에 대한 방전 현상을 연구하였다. 테스트 패널을 통하여 정적 마진, 휘도, 소비전력, 발광효율 등을 구하였고, Fluid 시뮬레이션을 통하여 전기장 분포, 하전입자 및 여기종 입자들의 개수 및 밀도 분포, 벽전하 분포 등을 통하여 방전 특성의 경향성을 분석하였다. 격벽 높이가 높아질수록 방전 공간이 넓어지면서 효율이 증가하였으나 $140\;{\mu}m$ 이상의 높이에서는 광 변환 효율이 감소하면서 효율이 오히려 감소하였다.