• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.93-95
• /
• 2011

In this study we tried to measure the effect of magnetic field on the dielectric properties of $BaTiO_3-MgFe_2O_4$ soft magnetic composite. Composites with different weight percents of ferroelectric and ferromagnetic phases were subjected to magnetic field in the order of 0 to 450 Oe and the variation of the dielectric properties was observed. The Variation of dielectric polarization was discussed in terms of Maxwell-Wagner type polarization in particulate composites.

• Tribology and Lubricants
• /
• 제26권2호
• /
• pp.111-121
• /
• 2010

The purpose of this study is to examine the effect of diesel soot contents on the deterioration of engine oil in terms of the changes in the dielectric constants of diesel engine oils. Therefore, it is figured out the level of oil deterioration by investigating how are the dielectric constants of diesel engine oils changed according to changes in diesel soot contents. The measured data will be able to be used as the reference data to judge the level of oil deterioration induced by diesel soot when the previously developed oil deterioration sensor will be applied at diesel vehicles in the future.

• 전기의세계
• /
• 제18권2호
• /
• pp.15-20
• /
• 1969

The main focus of this paper is on the study of the .gamma. ray irradiation effect upon the electrical properties of a B-kind insulator which is one of the inorganic insulators. The mica is so typical of the B kind insulators as to be selected for a sample. DC, AC, and Impulse voltage is applied to the variable .gamma. ray irradiated dose samples with the constant time duration and the time variable samples with the .gamma. ray irradiated dose. The dielectric breakdown voltage and dielectric constant are measured from the samples and we get the experimental data that the dielectric breakown voltage variations are relatively large, but the dielectric constants are almost constant. The above conclusion is useful for the selection and application of the inorganic insulators under the irradiation effects, and we expect that the conclusion can apply to not only B-kind insulators but also the inorganic insulators.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권1호
• /
• pp.61-67
• /
• 1997

We have studied dielectric properties of sol-gel derived tantalum oxide thin films as the insulators. As the sample is annealed from 300.deg. C to 700.deg. C, it is found amorphous below 600.deg. C and crystalline over it. Dielectric constant is maximum(18.6) when Ta$_{2}$O$_{5}$ film was annealed at 400.deg. C. It is found that dielectric strength in Ta$_{2}$O$_{5}$ film annealed at 400.deg. C (1.5MV/cm) increases and then decreases over annealed at 500.deg. C. This phenomenon was attributed to pinhole effect and crystallization. The de conduction properties can be interpreted by Poole-Frenkel effect.ect.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.436-439
• /
• 2000

Change of dielectric loss of use in high relative permitivity capacitor BaTiO$_3$ ceramic depends on Mn doping have been investigated. The powders used in this study were commercial BaTiO$_3$, TiO$_2$and, MnCO$_3$. Sample was fabricated by conventional ceramic process. The quantity of Mn was changed gradually from 0.lmol% to 10mo1%. The sintering densities were reduced with increasing amount of MnCO$_3$. This result is because of increase of low density second phase BaMnO$_3$. When the samples were doped by over 0.2mol% of MnCO$_3$, average grain sizes were enlarge to several tens ${\mu}{\textrm}{m}$. The dielectric losses were reduced by Mn doping to lmol% but, increased from lmol% to 10mo1% gradually.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.10-15
• /
• 1990

Dielectric rod resonator 방법을 이용하여 고주파 대역에서 낮은 유전 손실을 갖는 유전체의 유전 특성을 측정하는 이론과 실험결과를 보였다. 유전체 시편과 금속 도체판 사이에 존재하는 공기층 효과를 최소화하기 위해 $TE_{011}$ mode 공진 주파수를 이용하였다. 컴퓨터를 사용하여 공진 주파수와 시편 크기, 2-dB 대여폭으로부터 유전 특징을 계산하였다. 측정의 오차 범위는 유전 상수인 경우 ${\pm}3{\%}$ 유전 손실인 경우 ${\pm}12{\%}$ 이내였다.

• Tribology and Lubricants
• /
• 제37권6호
• /
• pp.203-207
• /
• 2021

This study presents the development of dielectric constant sensors to measure lubricant properties. The lubricant oil sensor is used to measure oil properties and machine conditions. Various condition monitoring methods are applied to diagnose machine conditions. Machine condition monitoring using oil sensors has advantage over other machine condition monitoring methods. The fault conditions can be noticed at the early stages by the detection of wear particles using oil sensors. Therefore, it provides an early warning in the failure procedure. A variety of oil sensors are applied to check the machine condition. Among all oil sensors, only one sensor can measure the tendency of several properties such as acidity and water content. A dielectric constant sensor is also used to measure various oil properties; therefore, it is very useful. The dielectric constant is the ratio of the capacitance of a capacitor using that material as a dielectric to that of a similar capacitor using vacuum as its dielectric. The dielectric constant has an effect on water content, contaminants, base oil, additive, and so forth. In this study, the dielectric constant sensor is fabricated using MEMS process. In the fabrication process, the shape, gap of the electrode array, and thickness of the insulation material are considered to improve the sensitivity of the sensor.

• Transactions on Electrical and Electronic Materials
• /
• 제13권3호
• /
• pp.116-120
• /
• 2012

In this paper, ZnO-Epoxy nanocomposites (NEP) were prepared and epoxy composites that contain 5 wt% micro ZnO (MEP) and deliberately not well dispersed nano ZnO (NDNEP) were also prepared for purpose of comparison. The effects of the particle size and dispersion of ZnO on dielectric properties of epoxy resin were chiefly studied. Test results showed that: at a loading of 5 wt%, the three epoxy composites seem to have no significant difference on resistivity compared to epoxy resin; Dielectric constants of all the epoxy composites are also basically the same but they are bigger compared to that of the pure epoxy resin (unfilled); Dielectric dissipation factors ($tan{\delta}$) of NDNEP is greater than that of NEP and MEP. NEP has the minimum dielectric loss factor, whereas dielectric loss factors of the three epoxy composites are larger than that of the pure epoxy resin. The decreasing order of electrical breakdown strength for the three epoxy composites and for the pure epoxy resin is as follows: NEP>MEP>NDNEP>EP. Finally, in order to explain the experimental results the aggregation interface phase was proposed. Furthermore, addition of well dispersed nano filler has proved to have a positive effect on the improvement of the dielectric properties of epoxy resin.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1092-1095
• /
• 2005

The effect of the dielectric constant (${\varepsilon}$) of bonding materials in screen-printed carbon nanotube cathode on field enhancement factor was investigated using the ANSYS software for high-efficient CNT-cathodes. The field enhancement factor increased with decreasing the dielectric constant and reaching a maximum value when the dielectric constant is 1, the value for a vacuum. This indicates that the best bonding materials for screen-printing CNT cathodes should have a low dielectric constant and this can be used as criteria for selecting bonding materials for use in CNT pastes for high-efficient CNT-cathodes

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.768-770
• /
• 2003

In AC PDP, since charges generated by gas discharge are accumulated on the dielectric. The dielectric is a major factor to determine cell capacitance and its memory effect is a play an important role in PDP driving. In this experiment, we have investigated the electro-optical characteristics with dielectric thickness and we have analyzed wall charge and wall voltage by Q-V energy diagram. The dielectric thickness was varied from 20 um to 50 um. As results, according to the dielectric thickness increase,cell capacitance and power consumption is reduced.