• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.515-518
• /
• 2005

LiDAR(Light Detection and Ranging) with digital aerial photograph can be used to measure tree growth factors like total height, height of clear-length, dbh(diameter at breast height) and crown projection area. Delineating crown is an important process for identifying and numbering individual trees. Crown delineation can be done by watershed method to segment basin according to elevation values of DSMmax produced by LiDAR. Digital aerial photograph can be used to validate the crown projection area using LiDAR. And tree height can be acquired by image processing using window filter$(3cell\times3cell\;or\;5cell\times5cell)$ that compares grid elevation values of individual crown segmented by watershed.

• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.125-135
• /
• 2022

In this study, growth changes of the diameter at breast height (DBH), height, basal area, volume, and biomass of Korean white pine (Pinus koraiensis Siebold & Zucc.) on a plantation were examined via long-term monitoring. In addition, this study was performed to provide the basic data for timber production in line with DBH class by comparing the growth of the relative DBH size. Growth characteristics according to DBH class were analyzed by categorizing trees into five classes based on sorted DBH rankings: class I (1%-20%; upper 20%), class II (21%-40%), class III (41%-60%), class IV (61%-80%), class V (81%-100%; lower 20%). A total class (0%-100%) was also used. Total increment and mean annual increment (MAI) were calculated using data from nine measurements taken over 39 years. Tree characteristics based on average values and stand characteristics based on unit area per hectare were examined. According to the total increments of variables, the differences in DBH, basal area, volume, and biomass among classes I-V increased over time, whereas the height difference did not continually increase. According to MAI, the maximum DBH value was 0.92 cm·yr^-1 at age 23 in class I, whereas the maximum value in all trees was 0.69 cm·yr^-1 at age 17. The maximum value of height MAI for class I was 0.52 m·yr^-1 at age 23, whereas that for all trees was 0.49 m·yr^-1 at age 20. In terms of basal area, volume, and biomass growth at tree-and stand-level, the maximum MAI of class I and all trees was not observed during the measurement period. Therefore, additional long-term monitoring data are required to determine the maximum MAI of the variables.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.527-535
• /
• 2015

With results from previous Korean studies on forest thinning, we conducted a meta-analysis on the effect of thinning on diameter at breast height (DBH) growth and carbon (C) stocks (tree, litter layer, coarse woody debris (CWD), and soils) in Korean forests. Thinning increased the DBH growth and the C stocks in soils by 39.2% and 12.8%, respectively, while it decreased the C stocks in tree by 30.9%. In contrast, thinning had no significant effect on the C stocks in litter layer and CWD. The DBH growth and the C stocks in tree showed significant correlations with thinning intensity and recovery time. The C stocks in litter layer correlated with recovery time while those in CWD and soils did not show significant correlation neither with thinning intensity nor with recovery time. Regression models of the DBH growth and the C stocks in tree were developed to quantify the effect of thinning intensity and recovery time. An integration of the regression model of the tree C stock into forest carbon models is expected to be essential to quantify the effect of thinning on the C stocks in litter layer, CWD, and soils. We also suggested expansion of study species, long-term and frequent monitoring, and investigation on understory vegetation in order to elucidate changes in Korean forests following thinning practices.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.51-59
• /
• 2011

This study was conducted to analysis the growth characteristics and the diameter at breast height (10 cm) reached ages in natural stand and platation for the optimal planting density and planting timing of Acer mono for. rubripes. There was high correlation between the DBH and crown diameter (E-W: r=0.82, S-N: r=0.76) in natural stand, and between the DBH and crown diameter (E-W: r=0.76, S-N: r=0.90) in plantation. In natural stand, average reached age on DBH 10 cm was $21.1{\pm}7.0$, and was $9.2{\pm}1.3$ in plantation. Therefore, the collectable timing of sap in artificial planting short approximately 2.3 times over the natural regeneration.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.330-330
• /
• 2016

The quantification of dry season evaporation in regions, where the magnitude of dry season flows is key to the regional water supply, is essential for good water management. Also, tree transpiration has a significant role in the water balance of a catchment whenever it is tree populated, especially in water limited environments. Such is the case in the Middle Mountains of Nepal where dry season flows play a significant role in downstream water provisioning and their proper functioning is key to the welfare of millions of people. This research seeks to study the transpiration of a pine forest stand in the Jikhu Khola Watershed in the Middle Mountains of Nepal. To the author's knowledge, no single study has been made so far to estimate the dry season evaporation from the planted forest stand in the Middle Mountains of Nepal. The study was carried out in planted pine forest embedded within the Jikhu Khola Catchment. Field campaigns of sap flow measurements were carried out from September, 2010 to February, 2011 in the selected plot of 15*15m dimension, to characterize dry season evaporation. This was done by measuring sap fluxes and sapwood areas over the six trees of different Diameter at Breast Height (DBH) classes. The sap flux was assessed using Granier's thermal dissipation probe (TDP) technique while sapwood area was determined using several incremental core(s) taken with a Pressler borer and immediately dyeing with methyl orange for estimating the actual depth of sapwood area. Transpiration of the plot was estimated by considering the contribution of each tree class. For this purpose, sap flux density, sapwood area and the proportion of total canopy area were determined for each tree class of the selected plot. From these data, hourly and diurnal transpiration rates for the plot were calculated for experimental period. Finally, Cienciala model was parameterized using the data recorded by the ADAS and other terrain data collected in the field. The calibrated model allowed the extrapolation of Sap flux density (v) over a six month period, from September 2010 to February 2011. The model given sap flux density was validated with the measured sap flux density from Grainier method.

• The Korean Journal of Ecology
• /
• v.8 no.4
• /
• pp.197-200
• /
• 1985

The relations of crown width and DBH for Pinus densiflora, Pinus rigida, Pinus koraiensis, and Ginkgo biloba were accomplished to estimate the level of crown competition. Measurements of the relations revealed that crown width and DBH were highly correlated for the same species. Also it seems that these relations are independent of age and site quality. The results of regression analysis were as follow: P. densiflora, Y=0.3477X+0.3828 r=0.95 p. rigida, Y=0.3537X+0.1645 r=0.95 P. koraiensis, Y=0.2895X+0.6310 r=0.92 G. biloba, Y=0.4360X+0.0995 r=0.90 The significant differences between G. biloba and pine species seems due to their structural differences of crown formation according to tree species. As results of computing Maximum Crown Area and Crown Competition Factor as indices of crown competition, they indicated that P. densiflora would grow better under the natural conditions.

• The Korean Journal of Ecology
• /
• v.22 no.6
• /
• pp.355-361
• /
• 1999

Distribution of size class, population regeneration and changes in the population structure of Quercus mongolica were studied from 1994 to 1999 in Mt. Jumbong (128°27' E, 38° 04' N) of Mt. Sorak National Park and Biosphere Reserve in central Korea. Three 20m × 20m permanent quadrats were set up at the elevation of 900m. The vegetation of the study site was dominated by Quercus mongolica and Acer pseudosieboldianum, but little change was observed in the community structure from 1995 to 1999. Most mortality in the study site was observed in small trees of A. pseudosieboldianum and Tilia amurensis. Mean annual growth in dbh (diameter of breast height) of Q. mongolica for 4 years was only 0.09cm, and no ingrowth of saplings (dbh < 2.5cm) into tree class was observed during the study period. Among the 21 Q. mongolica trees studied in the permanent quadrats. all the smaller trees (dbh < 30cm) were established in 1920 ∼ 1950, while many bigger trees (with 40cm < dbh < 80cm) were established in 1750 ∼ 1800, indicating that its establishment was episodic. Distribution of dbh classes among Q. mongolica trees shows that smaller trees were poorly represented, and no saplings of Q. mongolica occurred in the permanent quadrats studied, indicating that currently Q. mongolica is not regenerating well in the study site. Total seed production of Q. mongolica in 1994 was estimated as 88 acorns per square meter in the study site. Rate of predation including caching of acorns was highest in 1994, then declined sharply thereafter. Most of the acorns which managed to survive in the first year were predated in the second year, and only 5% of the acorns produced in 1994 survived into the third year. No seeds produced in 1994 or seedlings germinated from them succeeded to survive to 5 years after seed production. However, seedling emergence rate and seedling survival were high in the early growing season in 1995. These results suggest that predation can be a significant factor in the regeneration of Q. mongolica. and that Q. mongolica is not regenerating well in Mt. Jumbong and needs large scale disturbances for its new recruitment.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.364-371
• /
• 2019

This study was conducted to provide the basic information for a reasonable forest management plan and sustainable forest management by developing a dominant tree height growth model using diameter at breast height (DBH) and site index curves for Pinus densiflora and Chamaecyparis obtusa growing in Jeolla-do. The altitude, slope, orientation, soil type, height and DBH of a dominant tree, and the ages of trees were measured for 3055 Pinus densiflora trees (611 plots) and 3345 Chamaecyparis obtusa trees (699 plots), and these data were used to develop a customized afforestation map. In the dominant tree height growth model, the relationship to DBH was used in the Petterson, Michailow, and log equations. Also, a dominant tree height growth model in relationship to age used the Chapman-Richards, Schumacher, and Gompertz equations. The Petterson equation, which has a lower mean square error, was used to model dominant tree height growth in relationship to DBH. In the model of dominant tree height growth in relationship to age, three kinds of equations were considered to have little statistical difference. Therefore, the Chapman-Richards equation was chosen for modeling on the national level. Thirtyyears was used as the base age, which is an important factor for estimating the site index curves. In the results, a more varied range of site index family curves with 6-18 was developed for Pinus densiflora, and with 6-22 for Chamaecyparis obtusa. As the new site index curves indicated influences on growth of Pinus densiflora and Chamaecyparis obtusa, a reasonable forest management plan will be possible in the future for Jeolla-do.

• Korean Journal of Environment and Ecology
• /
• v.27 no.5
• /
• pp.571-578
• /
• 2013

This study generated regression models through a direct harvesting method to estimate carbon storage and uptake by Pinus densiflora and Pinus koraiensis, the major evergreen tree species in urban landscape, and established essential information to quantify carbon reduction by urban trees. Open-grown landscape tree individuals for each species were sampled reflecting various diameter sizes at a given interval. The study measured biomass for each part including the roots of sample trees to compute the total carbon storage per tree. Annual carbon uptake per tree was quantified by analyzing radial growth rates of stem samples at breast height. The study then derived a regression model easily applicable in estimating carbon storage and uptake per tree for the two species by using diameter at breast height (DBH) as an independent variable. All the regression models showed high fitness with $r^2$ values of higher than 0.98. While carbon storage and uptake by young trees tended to be greater for P. densiflora than for P. koraiensis in the same diameter sizes, those by mature trees with DBH sizes of larger than 20 cm showed results to the contrary due to a difference in growth rates. A tree of P. densiflora and P. koraiensis with DBH of 25 cm stored 115.6 kg and 130.0 kg of carbon, respectively, and annually sequestered 9.4 kg and 14.6 kg. The study has broken new grounds to overcome limitations of the past studies which quantified carbon reduction of the study species by substituting, due to a difficulty in direct cutting and root digging of landscape trees, coefficients from forest trees such as biomass expansion factors, ratios of below ground/above ground biomass, and diameter growth rates.

• Journal of Forest and Environmental Science
• /
• v.40 no.1
• /
• pp.35-42
• /
• 2024

The Japanese larch (Larix kaempferi [Lamb.] Carriere) is a major timber species in Korea. However, studies on bucking rates and merchantable logs of this species are insufficient in South Korea. To bridge these gaps, in this study, the bucking rate of Japanese larch (Larix kaempferi [Lamb.] Carriere) was computed and the number of long logs and merchantable log volumes were analyzed. Sample trees were bucked according to the log grade for trading, and collected from a forest field in Gangwon Province. The bucking rate of all Japanese larch logs was >89%. The highly profitable 2-4 logs of 3.6 m length from trees with ≤30 cm diameter at breast height (DBH) and 5-6 logs with ≥34 cm DBH were produced. The bucking rate of long logs was >84%; thus, Japanese larch was found to be suitable for the supply of high-grade timber. Additionally, to follow reasonable wood supply plans, merchantable volume tables were offered based on 3.6 m-long number of logs and small-end diameter classes. Understanding the proportion of merchantable log volumes, bucking rates, and the number of long and short logs has large-scale applications in practical forestry.