• 대한치과교정학회지
• /
• 제33권2호
• /
• pp.121-130
• /
• 2003

본 연구는 전기도금을 이용하여 교정용 선재의 직경을 증가시킨 후 그 물성 변화를 알아봄으로써 이의 임상적 적용 가능성을 알아보고자 시행되었다. 0.016 인치 스테인레스 스틸 교정용 선재에 전기도금을 위한 적절한 전처리를 시행한 후, 황산 니켈 100g/L, 염화니켈 60g/L, 붕산 30g/L, 염화나트륨 50g/L의 조성을 가지는 전해액을 제조하여 1.7V의 전압과 $25\~29^{\circ}$의 온도, $3.1\~3.3pH$의 조건 하에서 직경을 0.002 인치 증가시켜 0.018 인치 직경의 선재로 만들었다 전기도금 과정 중 1분 단위로 직경을 측정하여 시간에 따른 직경 증가율을 구하였고, 도금 후 서로 다른 세 지점의 직경을 계측하여 균일성을 평가하였으며, 도금 금속의 정성분석을 위하여 X-선 회절검사를 시행하였다. 도금층의 밀착성 증진을 위해 $400^{\circ}$의 전기로에서 10분간 열처리를 시행한 후 도금 전후와 열처리 전후의 물성 변화를 알아보기 위하여 3점 굴곡 실험을 시행하여 다음과 같은 결과를 얻었다. 1.전반적인 하중-변형률 곡선을 보면 0.016인치 군과 0.018인치 군 사이에 도금 처리한 군이 존재하였으며 열처리한 경우가 0.018 인치 군에 더욱 가까워지는 양상을 보였다. 2. 도금에 이해 지경은 0.002이차 증가시킨 군이 기존의 0.016이차 군에 비하여 강성과 항복강도 극한강도 모두 증가하는 경향을 보였으며 이중 강성과 극한 강도는 통계적으로 유의한 차이를 보였다. 3. 0.016인치에서 도금에 의해 직경을 0.002인치 증가시킨 군이 기존의 0.018인치 군보다 강성과 항복강도, 극한강도 모두에서 낮게 나타났으며 통계적 유의차를 보였다. 4. 도금 후 열처리를 시행한 군이 시행하지 않은 군보다 강성, 항복강도, 극한강도 모두 높은 경향을 보였으며, 극한강도에서 유의한 차이를 나타내었다. 5. 전기도금 후 서로 다른 세 지점의 직경차이는 $0.1\~0.3\%$로 균일하게 나타났으며 통계적으로도 유의차가 존재하지 않았다.

• Tribology and Lubricants
• /
• 제31권6호
• /
• pp.308-315
• /
• 2015

In the tribological performance of materials, a textured surface reduces the friction coefficient and wear. This study investigates the effects of a pattern of 300 µm dimples in a hexagonal array on the tribological characteristics. Previous studies investigated 200 µm dimples by using a similar material and method. There are three frictional conditions based on the Stribeck curve: boundary friction, mixed friction, and fluid friction. In this experiment, we investigated the frictional characteristics by conducting frictional tests at sliding speeds ranging from 9.6 rpm to 143.3 rpm and a normal load ranging from 13.6 N to 92 N. We used a photolithography method to create dimples for surface texturing. We used five specimens with different dimple densities 10%, 15%, 20%, 25%, and 30% in this study. The dimple density on the surface area is one of the important factors affecting the friction characteristics. The duty number graph indicates a fully developed fluid friction regime. Fluid friction occurs at a velocity of 28.7-143.3 rpm. We observed the best performance at a dimple density of 10% and a dimple diameter of 300 µm in the hexagonal array, the lowest friction coefficient at 0.0037 with 9.6 rpm 9.6N load, and the maximum friction coefficient at 0.0267 with 143.3 rpm 92N load.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.212-223
• /
• 2015

Purpose: Physical properties of Detarium microcarpum seeds were investigated as a function of moisture content to explore the possibility of developing bulk handling and processing equipment. Methods: Seed size, surface area, and 1,000-seed weight were determined by measuring the three principal axes, measuring area on a graph paper, and counting and weighing seeds. Particle and bulk densities were determined using liquid displacement and weight in a measuring cylinder, respectively. Porosity was computed from particle and bulk densities. Roundness and sphericity were measured using shadowgraphs. Angle of repose and static and kinetic coefficients of friction were determined using the vertical cylindrical pipe method, an inclined plane, and a kinetic coefficient of friction apparatus. Results: In the moisture range of 8.2%-28.5% (db), the major, intermediate, and the minor axes increased from 2.95 to 3.21 cm, 1.85 to 2.61 cm, and 0.40 to 1.21 cm, respectively. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose increased from 354.62 to $433.19cm^2$, 3.184 to 3.737 kg, 1060 to $1316kg/m^3$, and 30.0% to 53.1%, respectively, whereas bulk density decreased from 647.6 to $617.2kg/m^3$. Angle of repose increased from $13.9^{\circ}$ to $28.4^{\circ}$. Static and kinetic coefficients of friction varied between 0.096 and 0.638 on different structural surfaces. Conclusions: Arithmetic mean, geometric mean, and equivalent sphere effective diameters determined at the same moisture level were significantly different from each other, with the arithmetic mean diameter being greatest. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose all increased linearly with moisture content. Bulk density decreased linearly with moisture content. The coefficients of friction had linear relationships with moisture content. The highest values of static and kinetic coefficients of friction were observed on galvanized steel and hessian fabric, respectively, whereas the lowest values were observed on fiberglass.

• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.608-617
• /
• 2020

For efficient use and expansion of domestic small- and medium-diameter woods, cross-laminated wood panels composed of tropical hardwoods and domestic temperate woods were fabricated, and the bending creep behavior under long-term loading was investigated. The bending creep curve of the cross-laminated wood panels showed an exponential function graph with a sharp increase at the top right side. The wood panel composed of a teak top layer and larch core and bottom layers recorded the highest initial deformation, and that composed of a merbau top layer and tulip core and bottom layers showed the lowest initial deformation. Creep deformation of the cross-laminated wood panels showed the highest value in that composed of a teak top layer and larch core and bottom layers and showed the lowest value in that composed of a merbau top layer and tulip core and bottom layers. The obtained creep deformation is 3.1-4.3 times that of merbau, however, it is remarkably lower than that of tulip and larch. The highest relative creep was recorded by the wood panel composed of merbau top layer and larch core and bottom layers, whereas that composed of the teak top layer and tulip core and bottom layers showed the lowest relative creep.

• 정보처리학회논문지A
• /
• 제9A권3호
• /
• pp.333-340
• /
• 2002

임베딩은 어떤 상호연결망 G를 다른 상호연결망 H에 사상시키는 것으로 연결망 G에서 개발된 알고리즘을 다른 연결망 H에서 시뮬레이션 할 수 있게 한다. 본 논문에서는 먼저 Hierarchical Cubic Network HCN(n, n) and Hierarchical Folded-hypercube Network HFN(n, n) 사이의 임베딩 방법을 제시한다. HCN(n, n)과 HFN(n, n)은 하이퍼큐브에서 제안된 성질을 가지면서 하이퍼큐브의 망비용 (분지수$\times$지름)을 개선한 상호연결망이다. HCN(n, n)은 HFN(n, n)에 연장율 3, 밀집율 2로 임베딩되고 평균연장율이 2 이하임을 보인다. HFN（n, n）은 HCN（n, n）에 연장율 0(n)에 임베딩 되지만, 평균연장율이 2 이하임을 보인다. 마지막으로 HCN（n, n）의 고장허용도에 대해 논하고, HCN（n, n）이 최대 고장 허용도(maximally fault tolerant)를 가짐을 보인다.

• Wind and Structures
• /
• 제39권1호
• /
• pp.1-14
• /
• 2024

Widespread damages from extreme winds have attracted lots of attentions of the resilience assessment of power distribution systems. With many related environmental parameters as well as numerous power infrastructure components, such as poles and wires, the increased challenge of power asset management before, during and after extreme events have to be addressed to prevent possible cascading failures in the power distribution system. Many extreme winds from weather events, such as hurricanes, generate widespread damages in multiple areas such as the economy, social security, and infrastructure management. The livelihoods of residents in the impaired areas are devastated largely due to the paucity of vital utilities, such as electricity. To address the challenge of power grid asset management, power system clustering is needed to partition a complex power system into several stable clusters to prevent the cascading failure from happening. Traditionally, system clustering uses the Binary Decision Diagram (BDD) to derive the clustering result, which is time-consuming and inefficient. Meanwhile, the previous studies considering the weather hazards did not include any detailed weather-related meteorologic parameters which is not appropriate as the heterogeneity of the parameters could largely affect the system performance. Therefore, a fragility-based network hierarchical spectral clustering method is proposed. In the present paper, the fragility curve and surfaces for a power distribution subsystem are obtained first. The fragility of the subsystem under typical failure mechanisms is calculated as a function of wind speed and pole characteristic dimension (diameter or span length). Secondly, the proposed fragility-based hierarchical spectral clustering method (F-HSC) integrates the physics-based fragility analysis into Hierarchical Spectral Clustering (HSC) technique from graph theory to achieve the clustering result for the power distribution system under extreme weather events. From the results of vulnerability analysis, it could be seen that the system performance after clustering is better than before clustering. With the F-HSC method, the impact of the extreme weather events could be considered with topology to cluster different power distribution systems to prevent the system from experiencing power blackouts.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.21-34
• /
• 1992

The behavior of fatigue crack growth in the single spot welded joint of zinc galvanized steel sheets was studied experimentally and analytically based on fracture mechanics. Axial tension fatigue tests were carried out with the BSxGAB specimen that the bare plane(GAB) of monogalvanized steel sheet was spot welded to the double thickness bare steel sheet(BS), and with the GAxGAB specimen that the galvanized plane (GA) was spot welded to the equal thickness bare plane (GAB) 1. The relation between maximum stress intensity factor, K sub(max) and the number of cycles to failure, N sub(f) has shown a linear relation on log-log plot in the spot weld of the zinc galvanized steel sheet. 2. The fatigue strength of BSxGAB specimens is about 23% higher than that of GAxGAB specimens at the fatigue strength of $1\times10^6$ cycles. And the fatigue life of BSxGAB specimens at the same load range increases 6~9 times higher than that of GAxGAB specimens. 3. The general tendency at the angle of bending($\theta$) in an applied load has changed rapidly at the initial 20% of its life. After then, it has changed slowly. The change at the angle of bending has increased linearly as the load range increases. 4. It has shown a linear relation between the location ratio of initiation ${\gamma}$ and fatigue life $N_f$ on the semi-log graph paper. Here $\gamma$ means that the crack distance between main crack and sub-crack, 2L is divided by the nugget diameter, 2r. $\gamma=a{\cdot}log N_f+n$ (where a and n are material constant.)

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2010년도 춘계학술 발표회
• /
• pp.59-63
• /
• 2010

토치 점화 장치의 연소 특성을 파악하기 위하여 7개의 각기 다른 토치 점화 장치를 설계하였다. 토치 점화장치의 오리피스 직경에 따른 특성을 파악하기 위하여, 토치 점화 장치의 체적과 높이는 고정하고, 오리피스 직경을 4mm에서 16mm까지 2mm씩 증가시키며 실험하였다. 초기 화염 생성 및 전파는 질량 연소율과 연소 촉진율로 분석하였다. 질량 연소율과 연소 촉진율을 계산하기 위하여 정적 연소실 내의 평균 압력을 측정하였다. 또한 shadow graph법을 이용하여, 초기 화염 생성과 화염 전파과정 전 영역을 가시화하였다. 토치 점화 장치를 사용한 경우에는 일반적인 스파크 점화와 비교하여 질량 연소율의 기울기가 증가하였고, 연소 촉진율도 개선된것을 확인하였다. 또한 가시화된 이미지를 확인한 결과 토치 점화 장치를 사용하면 초기 화염 발달 단계에서 화염이 난류 화염으로 천이되어 연소가 촉진된것을 확인하였다.

• 한국시뮬레이션학회논문지
• /
• 제27권4호
• /
• pp.9-18
• /
• 2018

본 논문에서는 우리나라 고속도로의 교통망의 연결성을 분석하기 위하여 새로운 접근성 지표의 알고리즘을 제안한다. 먼저 2011년과 2017년 우리나라의 고속도로 교통망을 그래프로 나타낸 운송네트워크를 구한다. 그리고 그래프 이론의 연결수, 비교거리, 접근지표, 연결도, 산포지수, 지름 등의 개념을 이용하여 2011년과 2017년 우리나라의 고속도로 교통망을 분석하고 비교한다. 이를 위하여 주어진 운송네트워크로부터 다양한 접근성 지표를 쉽게 얻을 수 있는 알고리즘을 제시한다. 본 연구의 시뮬레이션 결과를 이용하여 고속도로의 운송네트워크에서 교통의 중심이 되는 도시를 찾을 수 있다. 또 네트워크에는 편입되어 있지만 상대적으로 교통이 낙후된 도시를 찾아, 향후 전국의 교통의 연결성을 높이는 기초자료로 사용할 수 있도록 한다. 더욱이 고속도로 교통망을 모델로 하는 접근성 지표의 알고리즘을 제안하면 각 도시들의 접근성 공간구조를 파악할 수 있고, 교통을 포함한 각종 지역계획과정에서 효율적이고 합리적인 대안선정을 위한 기준을 제공할 수 있을 것이다.

• 대한구순구개열학회지
• /
• 제12권1호
• /
• pp.1-6
• /
• 2009

Oronasal fistula are a well-known complication of surgical treatment of cleft palate, occurring most frequently in the alveolus and hard palate. Previous reports have demonstrated that oronasal fistulas, particularly if greater than l cm in diameter, had an adverse effect on speech. The aim of this study was to demonstrate the relationship between the size of the fistula and the influence on velopharyngeal function. The site and size of the fistula were indicated on graph paper with calipers and measured in $mm^2$. Speech assessment was carried out using a Nasometer, VPI articulation differential test, spectrography. Patient whose fistulas affected their speech had significantly larger fistulas than those whose fistulas did not. The study shows that the larger the fistula, the greater the risk of hypernasality and nasal emission, but even small fistulas can cause speech problems. If obstruction of the nasal passage is eliminated in a patient with a previously asymptomatic fistula, it may result in a fistula becoming symptomatic, resulting in hypernasality and nasal emission. In conclusion, even small fistulas can influence speech production and should be considered before any treatment is planned. The study lends support to early closure of oronasal fistulas, particularly before pharyngeal flap surgery is contemplated.