• Journal of ILASS-Korea
• /
• v.18 no.3
• /
• pp.126-131
• /
• 2013

This paper describes the effect of ultrasonic frequency(f) on the atomization and deformation characteristics of single water droplet in an acoustic levitation field. To achieve this, the ultrasonic levitator that can control sound pressure and velocity amplitude by changing frequency was installed, and visualization of single water droplet was conducted with high resolution ICCD and CCD camera. At the same time, atomization and deformation characteristics of single water droplet was studied in terms of normalized droplet diameter($d/d_0$), droplet diameter(d) variation and droplet volume(V) variation under different ultrasonic frequency(f) conditions. It was revealed that increase of ultrasonic frequency reduces the droplet diameter. Therefore, it is able to levitate with low sound pressure level. It also induces the wide oscillation range, large diameter and volume variation of water droplet. In conclusion, the increase of ultrasonic frequency(f) can enhance the atomization performance of single water droplet.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.59-59
• /
• 2020

Salix gracilistyla has a characteristic of fast growth especially in the river side or infertile soil, showing a lot of lateral branches and a strong root system among the Salix. spp. On the basis of results observed, we provide several growth characteristics of S. gracilistyla among some selected provenances. In two-year results, root collar diameter ranged from 33.5 mm to 56.7 mm. Taeback showed the lowest value, and Jeongseon and Hoengseong were higher than the other areas in the traits above. Height growth was the lowest in Samcheok and the highest in Wonju. To examine growth and development of lateral branches is important because S. gracilistyla has a lot of lateral branches which account for high biomass production. Length of lateral branch showed high variation, in which the highest number was observed in Yeongwol and the lowest in Samcheok. Many lateral branches were shown in Wonju. Preliminary study on biomass resources evaluation, we analyzed correlation between volume and length, and volume and root diameter. High correlation was observed between root diameter and plant volume. And we compared the observed volume with the caculated volume by regression formula. To evaluate Salix species as biomass resources, it is needed to survey growth characteristics continuously and adopt selection of individuals or families of high biomass and caloric values by reliable data. In addition, Salix spp. can be also applicable to selection breeding regime because of feasible propagation and fast growth.

• Communications of the Korean Mathematical Society
• /
• v.12 no.2
• /
• pp.365-371
• /
• 1997

We prove some relation of volume with the covering radius of Riemannian manifolds and reprove well-known sphere rigidity theorems by using it.

• Journal of the Korean Society of Radiology
• /
• v.82 no.6
• /
• pp.1534-1544
• /
• 2021

Purpose To examine the effect of lung volume on the size and volume of pulmonary subsolid nodules (SSNs) measured on CT. Materials and Methods A total of 42 SSNs from 31 patients were included. CT examination was first performed at total lung capacity (TLC), and a section containing the nodule was additionally scanned at tidal volume (TV). The diameter and volume of each SSN, as well as the cross-sectional lung area containing the nodule, were measured. The significance of the changes in measurements between TLC and TV within the same individuals was evaluated. Results The lung area and the diameter and volume of SSNs decreased significantly at TV by 12.7 cm², 0.5 mm, and 46.4 mm³ on average, respectively (p < 0.001), compared to those at TLC. Changes in lung area between TV and TLC were positively correlated with the change in SSN diameter (p = 0.027) and volume (p = 0.014). However, after correction (by considering the change in lung area), the changes in SSN diameter (p = 0.124) and volume (p = 0.062) were not significantly different. Conclusion SSN size and volume can be significantly affected by lung volume during CT scans of the same individuals.

• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.21-29
• /
• 2013

PURPOSES: Simulation of aggregate slump test using equivalent sphere particle in DEM and its validity evaluation against lab aggregate slump test METHODS : In this research, aggregate slump tests are performed and compared with DEM simulation. To utilize spheric particles in YADE, equivalent sphere diameter concept is applied. As verification measures, the volume in slump cone filled with aggregate is used and it is compared with volume in slump cone filled with equivalent sphere particle. Slump height and diameter are also used to evaluate the suggested numerical method with equivalent concept RESULTS : Simulation test results show good agrement with lab test results in terms of loose packing volume, height and diameter of slumped particle clump. CONCLUSIONS : It is concluded that numerical simulation using DEM is applicable to evaluate the effect of aggregate morphological property in loose packing and optimum gradation determination based on the aggregate slump test simulation result.

• Journal of the Korean Society of Visualization
• /
• v.21 no.1
• /
• pp.47-56
• /
• 2023

Bubble condensation, which involves the interaction of bubbles within the subcooled liquid flow, plays an important role in the effective control of thermal devices. In this study, numerical simulations are performed using a VOF (Volume of Fluid) model to investigate the effect of tube diameter on bubble condensation. As the tube diameter decreases, condensation bubbles persist for a long time and disappear at a higher position. It is observed that for small tube diameters, the heat transfer coefficients of condensation bubbles, which is a quantitative parameter of condensation rate, are smaller than those for large tube diameters. When the tube diameter is small, the subcooled liquid around the condensing bubble is locally participated in the condensation of the bubble to fill the reduced volume of the bubble due to the generation of a backflow in the narrow space between the bubble and the wall, so that the heat transfer coefficient decreases.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.386-393
• /
• 2011

This study suggests an algorithm for estimating joint diameter distribution in rock mass from the joint trace length distribution around a circular tunnel. For estimating the joint diameter distribution, the concept of Joint Center Volume (JCV) suggested by Song. (2005) was applied and the calculation method of JCV for the cylindrical window survey was developed by using the complete survey method. The estimated joint diameter distribution was verified against the original joint diameter distribution by Monte-Carlo simulation. It was observed that the estimated joint diameter distribution was converged to the original joint diameter distribution with less than 20% of error.

• Journal of Environmental Science International
• /
• v.33 no.7
• /
• pp.453-462
• /
• 2024

This study was carried out for the purpose of selecting the most appropriate taper equation for the actual stands of Pinus thunbergii in the southern coastal region of Korea and then developing a stem volume table to provide basic data for rational management. To develop a volume table of Pinus thunbergii in this region of Korea, 59 sample trees with various diameter distributions were selected and stem analysis was performed. As a result of stem analysis, two trees with abnormal diameter and height growth as the age increased were rejected, and 57 trees were analyzed. To develop the taper equation, seven major variable exponential equations were used, including Kozak 1988, 1994, 2001, 2002, Bi 2000, Muhairwe 1999, and Sharma and Parton 2009. As a result of parameter estimation and statistical verification, the Kozak 1988 model showed the highest goodness of fit with Fit I (Fit Index), RMSE 1.5620, Bias 0.0031, and MAD 1.0784. The diameter of each 10cm stem ridge for the selected model was estimated, and a stem volume table was produced using the mensuration of division (end area formula) using the Smalian equation. As a result of two-sample T-test for volume table of this study and current yield table, the volume for this study was found to be significantly larger at all observation points (p < 0.001). Even for the same tree species, it is judged that differentiated volume tables are needed for each growth environment characteristic.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.489-495
• /
• 2013

This study analyzed thevariation in the cutting force when the cutting area of a terrace volume is machined, which is generally left after the rough cutting of a sculptured surface. The numerically simulated results for the cutting forces are compared with cutting force measurements by considering the theoretical prediction of the cutting area formation and specific cutting volume. The variation in the cutting force is measured using a dynamometer installed on a machining center for 19 different kinds of test pieces, which are selected according to the variation in the terrace volume factor, tool diameter factor, and cutting depth factor. As a result, it is verified that the cutting forces evaluated by the numerical analysis coincide with the measured cutting forces, and it is proposed as a practical cutting force prediction model.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.82-87
• /
• 2007

Objective : Pontine hemorrhages usually result in a much higher morbidity and mortality than any other intracranial vascular lesion. The purpose of this study was to evaluate survival and the contributing factors for patients with pontine hemorrhage. Methods : Of the 41 patients who were admitted to our hospital with their first acute pontine hemorrhage from 1997 to 2005, 35 patients were included in this study. Medical records were reviewed to confirm the accuracy of diagnosis and collect demographic, clinical and radiological data. The patients were divided into two groups, survivors and deceased patients; then the survivors were divided again into a group of patient with good results and those with poor results. The location of the hematoma, maximum anteroposterior [AP] diameter, maximum transverse diameter, hematoma volume, ventricular extension, extension into the midbrain, hydrocephalus and initial Glasgow coma scale [GCS] were evaluated. Results : The two year survival rate was 58.5%. The survival of patients with pontine hemorrhage was affected by initial GCS score and transverse hematoma dimeter. Functional outcome of patients who survived was affected by initial GCS, maximum transverse diameter, maximum AP diameter and hematoma volume. Conclusion : The rate of survival after pontine hemorrhage is associated with the transverse diameter of the hematoma and more importantly the initial GCS. Long-term outcome of survivors is influenced by the initial GCS, transverse diameter, AP diameter and volume. Through the multivariate analysis, initial GCS is the only significant factor on survival. Strictly speaking, initial GCS is not modifiable. However, surgical reduction may be considered to amend theses decisive factors. Additional study for indication, timing and method of surgical management is needed.