• Economic and Environmental Geology
• /
• v.56 no.4
• /
• pp.435-445
• /
• 2023

A delta is a depositional landform that is formed when sediment transported by a river is deposited in a relatively low-energy environment, such as a lake, sea, or a main channel. Among these, a delta formed at the confluence of rivers has a great importance in river management and research because it has a significant impact on the hydraulic and sedimentological characteristics of the river. Recently, the equilibrium state of the confluence area has been disrupted by large-scale dredging and construction of levees in the Nakdong River. However, due to the natural recovery of the river, the confluence area is returning to its pre-dredging natural state through ongoing sedimentation. The time-series data show that the confluence delta has been steadily growing since the dredging, but once it reaches a certain size, it repeats growth and retreat, and the overall size does not change significantly. In this study, we developed a model to explain the sedimentation-erosion processes in the confluence area based on the assumption that the confluence delta reaches a dynamic equilibrium. The model is based on two fundamental principles: sedimentation due to supply from the tributary and erosion due to the main channel. The erosion coefficient that represents the Nakdong River confluence areas, was obtained using data from the tributaries of the Nakdong River. Sensitivity analyses were conducted using the developed model to understand how the confluence delta responds to changes in the sediment and water discharges of the tributary and the main channel, respectively. We then used annual average discharge of the Nakdong River's tributaries to predict the dynamic equilibrium positions of the confluence deltas. Finally, we conducted a simulation experiment on the development of the Gamcheon-Nakdong River delta using recorded daily discharge. The results showed that even though it is a simple model, it accurately predicted the dynamic equilibrium positions of the confluence deltas in the Nakdong River, including the areas where the delta had not formed, and those where the delta had already formed and predicted the trend of the response of the Gamcheon-Nakdong River delta. However, the actual retreat in the Gamcheon-Nakdong River delta was not captured fully due to errors and limitations in the simplification process. The insights through this study provide basic information on the sediment supply of the Nakdong River through the confluence areas, which can be implemented as a basic model for river maintenance and management.

• The Journal of Fisheries Business Administration
• /
• v.17 no.1
• /
• pp.77-106
• /
• 1986

In the field of fisheries, there is at the apex Central Federation of Fishery Cooperatives, established under the Fishery Cooperatives Law(1962), It is a multipurpose organization with a membership of 105 cooperatives, 87 regional cooperatives, 15 business-type cooperatives and 3 manufactures' cooperatives. Accordingly, this thesis examines the marketing of fishery cooperatives in Korea, and in particular considers the marketing channel strategy of fisheries products. No company can perform by itself all the activities involved in the production and distribution of its products and services to its final markets. It must work with other firms to get the job done. Thus marketing channel firms of the fisheries products include primarily the fishery cooperatives, the licensed In the field of fisheries, there is at the apex Central Federation of Fishery Cooperatives, established under the Fishery Cooperatives Law (1962). It is a multipurpose organization with a membership of 105 cooperatives, 87 regional cooperatives, 15 business-type cooperatives and 3 manufactures' cooperatives. Accordingly, this thesis examines the marketing of fishery cooperatives in Korea, and in particular considers the marketing channel strategy of fisheries products. No company can perform by itself all the activities involved in the production and distribution of its products and services to its final markets. It must work with other firms to get the job done. Thus marketing channel firms of the fisheries products include primarily the fishery cooperatives, the licensed dealers and the merchant middlemen. The goal of marketing is in matching of segments of supply and demand. Every producer seeks to the link the marketing channel firms that will help it accomplish its objective best. This thesis tries to attempt to improve the present Korean Fishery Cooperatives marketing activities. The purpose of the operation of fishery cooperatives is to guarantee the profits of fisherman as well as the interests of general consumers by eliminating the inordinate profits of middlemen and by narrowing other market margins. Fishery cooperatives marketing activity functions forming a self-helf organization for economic protection of producers themselves, and acting as a market reformational institution through its transaction by group. The following are the characteristics of fishery cooperatives marketing. \circled1 Fishery cooperatives is organized with an economic factor and a personnel factor. \circled2 Fishery cooperatives is non-profit organization. \circled3 The members of fishery cooperatives is independent constitution of economy, but they are closely connected with the cooperative. \circled4 Fishery cooperatives is a mutual aid organization. The objective of an efficient marketing strategy may be well described by the common saying provides the right product at the right time, the right place, and the right price. But it is quite true that the Korean Fishermen's Cooperative can be said to owe its development to the successful implementation of the marketing system. The use of the marketing system has resulted in the following marketing strategy. 1. The direct marketing system. \circled1 The cooperation between the fishery cooperatives and the other cooperative through the collection and delivery center. \circled2 The selling between the fishery cooperatives and the large scale retailers through the process industry. 2. The vertical marketing system. \circled1The fishermen's cooperative to be nominated by wholesaler in the terminal market. \circled2 Contracted vertical marketing system. \circled3 Abolition of selling by double auction in the landing and the terminal market. 3. The physical distribution system. \circled1 The need for adoption of cold chain system to connect production directly to consumption. \circled2 The need for more expansion of landing markets and terminal market facilities. Solutions to the problems of the Korean fishery are made possible through effective functioning of cooperative marketing activities of fishery products. The marketing concept of fishermen's cooperative lies in the satisfaction of consumer needs. According to the marketing concept fishermen's cooperative should try to satisfy customer's needs through a coodinated set of activities that allows the organization to achieve its goal. Providing satisfaction to customers is the major trust of the marketing concept. To do this, a business must find out what will satisfy customers. With this information the cooperative sells to the greatest possible number of customers through the most efficient sales and marketing channels. Economic rationality of fishermen's cooperative marketing lies in reduction of marketing cost and elimination of intermediate institutions. Cooperative marketing and direct marketing are both indispensable marketing factors for a new cooperative organization among the manu ways. The cooperation between the fishermen's cooperative and the others cooperative, and vertical marketing system are the most necessary ones. Propulsion of cooperative marketing system could not be successful without the support of the marketing instituion's help. Consequently, successful cooperative marketing ought to lead to the necessity not only for the improvement of marketing organization, but for the application of a new marketing concept in the fishermen's cooperative.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.125-148
• /
• 2014

This paper performs a historical analysis on the various factors contributing to the current carbon lock-in of Korean electricity industry by using techo-institutional complex. The possibilities of the industry's carbon lock-out toward more sustainable development are also investigated. It turns out that market, firm, consumer, and government factors are all responsible for the development of the carbon lock-in of Korean power industry; the Korean government consistently favoring large power plants based on the economy of scale; below-cost electricity tariff; inflation policy to suppress increases in power price; rapid demand growth in summer and winter seasons; rigidities of electricity tariff; and expansion of gas-fired and imported coal-fired large power plants. On the other hand, except for nuclear power generation and smart grid, environment laws and new and renewable energy laws are the other remaining factors contributing to the carbon lock-out. Considering three key points that Korea is an export-oriented economy, the generation mix is the most critical factor to decide the amounts of carbon emission in the power industry, and the share of industry and commercial power consumption is over 85%, it is unlikely that Korea will achieve the carbon lock-out of power industry in the near future. Therefore, there are needs for more integrated approaches from market, firm, consumer, and government all together in order to achieve the carbon lock-out in the electricity industry. Firstly, from the market perspective, it is necessary to persue more active new and renewable energy penetration and to guarantee consumer choices by mitigating the incumbent's monopoly power as in the OECD countries. Secondly, from the firm perspective, the promotion of distributed energy system is urgent, which includes new and renewable resources and demand resources. Thirdly, from the consumer perspective, more green choices in the power tariff and customer awareness on the carbon lock-out are needed. Lastly, the government shall urgently improve power planning frameworks to include the various externalities that were not properly reflected in the past such as environmental and social conflict costs.

• Culinary science and hospitality research
• /
• v.16 no.3
• /
• pp.298-306
• /
• 2010

This study was conducted to develop soybean paste sauce with walnuts and sesame seeds and apply it to cooked spinach to examine the applicability of the sauce. Two factors of soybean paste sauce, soybean paste and glutinous rice paste, were need to decide the quantity of the ingredients. Nine soybean paste sauces were produced with various compounding ratio of soybean paste and glutinous rice paste, and color, viscosity and sensory evaluations were performed. Sensory evaluations were measured by 7-point Likert scale. Color($4.08{\pm}1.22$), taste($4.72{\pm}1.24$), viscosity($4.96{\pm}1.39$) and overall quality($4.24{\pm}1.51$) of the sample(soybean paste 400 g, glutinous rice paste 400 g) got the highest scores. Therefore, the sample(soybean paste 400 g, glutinous rice paste 400 g) was applied to cooked spinach. Cooked spinach using developed sauce and cooked spinach using general soybean paste were prepared and performed sensory evaluation. As a result, all sensory items score of cooked spinach using developed sauce were higher than that using general soybean paste. Especially, taste($4.96{\pm}1.15$) and overall quality($0{\pm}1.16$) of cooked spinach using developed sauce were significantly higher than taste($4.38{\pm}1.53$) and overall quality($3.56{\pm}1.53$) of cooked spinach using commercial soybean paste(p<0.05). Consequently, the applicability of soybean paste sauce using natural seeds was confirmed.

• Journal of Distribution Science
• /
• v.8 no.3
• /
• pp.37-47
• /
• 2010

CRM refers to the operating activities that always maintain and promote good relationship with customers to ultimately maximize the company's profits by understanding the value of customers to meet their demands, establishing a strategy which may maximize the Life Time Value and successfully operating the business by integrating the customer management processes. In our country, many big businesses are introducing CRM initiatively to use it in marketing strategy however, most medium and small sized companies do not understand CRM clearly or they feel difficult to introduce it due to huge investment needed. This study is intended to present CRM promotion strategy and activities plan fit for the medium and small sized companies by analyzing the success factors of the leading companies those have already executed CRM by surveying the precedents to make the distributors out of the industries have close relation with consumers to overcome their weakness in scale and strengthen their competitiveness in such a rapidly changing and fiercely competing market. There are 5 stages to build CRM such as the recognition of the needs of CRM establishment, the establishment of CRM integrated database, the establishment of customer analysis and marketing strategy through data mining, the practical use of customer analysis through data mining and the implementation of response analysis and close loop process. Through the case study of leading companies, CRM is needed in types of businesses where the companies constantly contact their customers. To meet their needs, they assertively analyze their customer information. Through this, they develop their own CRM programs personalized for their customers to provide high quality service products. For customers helping them make profits, the VIP marketing strategy is conducted to keep the customers from breaking their relationships with the companies. Through continuous management, CRM should be executed. In other words, through customer segmentation, the profitability for the customers should be maximized. The maximization of the profitability for the customers is the key to CRM. These are the success factors of the CRM of the distributors in Korea. Firstly, the top management's will power for CS management is needed. Secondly, the culture across the company should be made to respect the customers. Thirdly, specialized customer management and CRM workers should be trained. Fourthly, CRM behaviors should be developed for the whole staff members. Fifthly, CRM should be carried out through systematic cooperation between related departments. To make use of the case study for CRM, the company should understand the customer and establish customer management programs to set the optimal CRM strategy and continuously pursue it according to a long-term plan. For this, according to collected information and customer data, customers should be segmented and the responsive customer system should be designed according to the differentiated strategy according to the class of the customers. In terms of the future CRM, integrated CRM is essential where the customer information gathers together in one place. As the degree of customers' expectation increases a lot, the effective way to meet the customers' expectation should be pursued. As the IT technology improved rapidly, RFID (Radio Frequency Identification) appears. On a real-time basis, information about products and customers is obtained massively in a very short time. A strategy for successful CRM promotion should be improving the organizations in charge of contacting customers, re-planning the customer management processes and establishing the integrated system with the marketing strategy to keep good relation with the customers according to a long-term plan and a proper method suitable to the market conditions and run a company-wide program. In addition, a CRM program should be continuously improved and complemented to meet the company's characteristics. Especially, a strategy for successful CRM for the medium and small sized distributors should be as follows. First, they should change their existing recognition in CRM and keep in-depth care for the customers. Second, they should benchmark the techniques of CRM from the leading companies and find out success points to use. Third, they should seek some methods best suited for their particular conditions by achieving the ideas combining their own strong points with marketing. Fourth, a CRM model should be developed that will promote relationship with individual customers just like the precedents of small sized businesses in Switzerland through small but noticeable events.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.407-415
• /
• 2010

In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.131-145
• /
• 2010

The framework for making a coordinated decision for large-scale facilities has become an important issue in supply chain(SC) management research. The competitive business environment requires companies to continuously search for the ways to achieve high efficiency and lower operational costs. In the areas of production/distribution planning, many researchers and practitioners have developedand evaluated the deterministic models to coordinate important and interrelated logistic decisions such as capacity management, inventory allocation, and vehicle routing. They initially have investigated the various process of SC separately and later become more interested in such problems encompassing the whole SC system. The accurate quotation of ATP(Available-To-Promise) plays a very important role in enhancing customer satisfaction and fill rate maximization. The complexity for intelligent manufacturing system, which includes all the linkages among procurement, production, and distribution, makes the accurate quotation of ATP be a quite difficult job. In addition to, many researchers assumed ATP model with integer time. However, in industry practices, integer times are very rare and the model developed using integer times is therefore approximating the real system. Various alternative models for an ATP system with time lags have been developed and evaluated. In most cases, these models have assumed that the time lags are integer multiples of a unit time grid. However, integer time lags are very rare in practices, and therefore models developed using integer time lags only approximate real systems. The differences occurring by this approximation frequently result in significant accuracy degradations. To introduce the ATP model with time lags, we first introduce the dynamic production function. Hackman and Leachman's dynamic production function in initiated research directly related to the topic of this paper. They propose a modeling framework for a system with non-integer time lags and show how to apply the framework to a variety of systems including continues time series, manufacturing resource planning and critical path method. Their formulation requires no additional variables or constraints and is capable of representing real world systems more accurately. Previously, to cope with non-integer time lags, they usually model a concerned system either by rounding lags to the nearest integers or by subdividing the time grid to make the lags become integer multiples of the grid. But each approach has a critical weakness: the first approach underestimates, potentially leading to infeasibilities or overestimates lead times, potentially resulting in excessive work-inprocesses. The second approach drastically inflates the problem size. We consider an optimized ATP system with non-integer time lag in supply chain management. We focus on a worldwide headquarter, distribution centers, and manufacturing facilities are globally networked. We develop a mixed integer programming(MIP) model for ATP process, which has the definition of required data flow. The illustrative ATP module shows the proposed system is largely affected inSCM. The system we are concerned is composed of a multiple production facility with multiple products, multiple distribution centers and multiple customers. For the system, we consider an ATP scheduling and capacity allocationproblem. In this study, we proposed the model for the ATP system in SCM using the dynamic production function considering the non-integer time lags. The model is developed under the framework suitable for the non-integer lags and, therefore, is more accurate than the models we usually encounter. We developed intelligent ATP System for this model using genetic algorithm. We focus on a capacitated production planning and capacity allocation problem, develop a mixed integer programming model, and propose an efficient heuristic procedure using an evolutionary system to solve it efficiently. This method makes it possible for the population to reach the approximate solution easily. Moreover, we designed and utilized a representation scheme that allows the proposed models to represent real variables. The proposed regeneration procedures, which evaluate each infeasible chromosome, makes the solutions converge to the optimum quickly.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.42-51
• /
• 2020

This study was performed to support the 6th forest basic planning by Korea Forest Service as predicting the change of forestland area by the transition of land use type in the future over 35 years in South Korea. It is very important to analyze upcoming forestland area change for future forest planning because forestland plays a basic role to predict forest resources change for afforestation, production and management in the future. Therefore, the transitional interaction between land use types in future of South Korea was predicted in this study using econometrical models based on past trend data of land use type and related variables. The econometrical model based on maximum discounted profits theory for land use type determination was used to estimate total quantitative change by forestland, agricultural land and urban area at national scale using explanatory variables such as forestry value added, agricultural income and population during over 46 years. In result, it was analyzed that forestland area would decrease continuously at approximately 29,000 ha by 2027 while urban area increases in South Korea. However, it was predicted that the forestland area would be started to increase gradually at 170,000 ha by 2050 because urban area was reduced according to population decrement from 2032 in South Korea. We could find out that the increment of forestland would be attributed to social problems such as urban hollowing and localities extinction phenomenon by steep decrement of population from 2032. The decrement and increment of forestland by unbalanced population immigration to major cities and migration to localities might cause many social and economic problems against national sustainable development, so that future strategies and policies for forestland should be established considering such future change trends of land use type for balanced development and reasonable forestland use and conservation.

• KDI Journal of Economic Policy
• /
• v.34 no.2
• /
• pp.55-93
• /
• 2012

In Korea, energy policies are actualized through various energy-related plans. Recently, however, as high-ranking plans, which are very vision-oriented, continually set higher sector-by-sector goals, subordinate action plans, which require consistency, encounter distortions in their establishment process. Also, each subordinate action plan reveals limitations in terms of securing flexibility of the plan in responding to uncertainties of the future. These problems pose potential risks such as causing huge social costs. In this regard, with an aim to provide empirical evidence for discussions on improving the procedure for developing and executing Korea's energy plans, this study mainly analyzes the Basic Plan on Electricity Demand and Supply-one of the most important subordinate action plans-in order to explain the problems of the Basic Plan in a logical manner, and potential problems that could occur in the process of sustaining consistency between the Basic Plan and its higher-ranking plans. Further, this paper estimates the scale of social costs caused by those problems assuming realistic conditions. According to the result, in the case of where maximum electric power is estimated to be 7% (15%) less than the actual amount in the Basic Plan on Electricity Demand and Supply, the annual generation cost will rise by 286 billion won and (1.2 trillion won) in 2020. Such social costs are found to occur even when establishing and executing the Basic plan according to the target goal set by its higher-ranking plan, the National Energy Master Plan. In addition, when another higher-ranking GHG reduction master plan requires the electricity sector to reduce emissions by additional 5% in the GHG emissions from the right mix in electricity generation with 'zero' cost of carbon emission, the annual generation cost will rise by approximately 915 billion won in 2020. On the other hand, the analysis finds that since economic feasibility of electric powers in Korea varies significantly depending on their type, Korea is expected to face very small potential social costs caused by uncertainties over the future price of carbon dioxide in the process of establishing the Basic Plan.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.2
• /
• pp.109-128
• /
• 2021

Objective : The purpose of this study was to develop a Korean version of the Activities of Daily Living (ADL)-focused Occupation-Based Neurobehavioral Evaluation (A-ONE) through cross-cultural adaptation and examine its validity and reliability. Methods : This study translated the A-ONE into Korean and performed cross-cultural adaptation for the Korean population. After the development of the Korean version of the A-ONE, cross-cultural and concurrent validities were analyzed. Internal consistency, test-retest reliability, and inter-rater reliability were also evaluated. Results : We adapted three items to the Korean culture. The Korean version of the A-ONE showed high cross-cultural validity with a content validity index (I-CVI) >0.9. It correlated with the Functional Independence Measure (FIM) (r=0.52-0.77, p<0.001), except for communication. Cronbach's α was 0.58-0.93 for the functional independence scale (FI) and 0.42-0.93 for the neurobehavioral specific impairment subscale (NBSIS). Intraclass correlation coefficients (ICCs) indicated high test-retest and inter-rater reliability for FI (ICC=0.79-1.00 and 0.75-1.00, respectively) and NBSIS (ICC=0.74-1.00 and 0.72-1.00, respectively). Conclusion : The Korean version of the A-ONE is well adapted to the Korean culture and has good validity and reliability. It is recommended to evaluate ADL performance skills and neurobehavioral impairments simultaneously in Korea.