• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.125-129
• /
• 1997

Induction is a method of heating electrically conductive materials such as metals. It is commonly used in process heating prior to metalworking and in heating, welding, and melting. The number of industrial and consumer items which undergo induction heating during some stage of their production is very large and rapidly expanding. So a program to analyze the induction heating system was developed through the research. This thesis contains the procedure for developing the program. Both eddy current and temperature distribution are obtained through the analysis of the induction heating system. The program was developed to calculate 2-dimensional axisymmetric problem. The validity of the program is scrutinized through the comparison between the analytic solution and the numerical solution.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.67-82
• /
• 1993

We developed a real-time CCD photometric program for IBM PC compatibles. This program can perform several functions necessary for CCD photometry such as telescope control. filter rotation, CCD camera control and data acquisition, two-dimensional image processing, simple aperture photometry and automatic differential photometry. The image processing of a spiral galaxy M51 observed with the SNU 61cm reflector shows a well developed spiral structure. Simple aperture photometric results of 14 stars in open cluster NGC 6871 almost accorded with those from IRAF/APPHOT. And we could confirm the light variation of eclipsing binary EM Cep by simultaneous automatic differential photometry of 7stars in NGC 7160. Due to the excellence in the precision and efficiency of automatic differential photometry using CCD. this program is very useful for the study of small amplitude ${\delta}$ Sct type variables and of the photometric stability of B ${\sim}$ F type stars.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.19-22
• /
• 1987

A program is developed for generations the dynamic equations for robotic manipulators using the symbolic language muSIMP/MATH. The muSIMP/MATH is a LISP-based computer algebra package, devoted to the manipulation of algebraic expressions including number, variables, functions, and matrix. The muSIMP/MATH can operate on IBM-PC compatibles with MS-DOS. The program is developed, on the e formalism. This is program is applicable to the manipulators of any number of degrees of freedom, maximum six degree of freedom in this program. To control robotic manipulators by using dynamic equation is required a symbolic equations. The generated dynamic equation can be applied directly to the robotic manipulators, for the generated dynamic equation is a reduced form of symbolic expression.

• Journal of Power System Engineering
• /
• v.7 no.3
• /
• pp.29-34
• /
• 2003

Genetic algorithm is a optimization technique based on the mechanics of natural selection and natural genetics. Global optimum solution can be obtained efficiently by operations of reproduction, crossover and mutation in genetic algorithm. The authors developed a computer program which can optimize marine propulsion shafting by using binary-coded genetic algorithm and modal analysis method. In order to confirm the effectiveness of the developed computer program, we apply the program to a optimum design problem which is to obtain optimum diameters of intermediate shaft and propeller shaft in marine propulsion shafting. Objective function is to minimize total mass of shafts and constraints are that torsional vibration stresses of shafts in marine propulsion shafting can not exceed the permissible torsional vibration stresses of the ship classification society. The computational results by the program were compared with those of conventional design technique.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.300-305
• /
• 2012

The vibration and stress analysis program of comprehensive vibration assessment program (CVAP) is to verify theoretically the structural integrity of reactor vessel internals (RVI) and to provide the basis for selecting the locations monitored in measurement and inspection programs. This paper covers the verification of the vibration and stress analysis methodology of APR1400 RVI CVAP. The analysis methodology was developed to use 3-dimensional hydraulic and structural models with ANSYS and CFX. To validate the methodology, the hydraulic loads and structural reponses of OPR1000 were predicted and compared with the calculated and measured data in the OPR1000 RVI CVAP. Since the results predicted with this methodology were close to the measured values considerably, it was confirmed that the analysis methodology was developed properly.

• 연구논문집
• /
• s.33
• /
• pp.111-122
• /
• 2003

The automatic assembly system of micro optical filter is a key technology in the development of optical modules with high functionality. In order to create such automatic assembly system of optical filter, we have developed the system and program capable of evaluation of $30\mum$-thick film optical filter as well as conventional optical filters performances. Moreover, we have carried out the evaluation of optical filter using developed system and program, and we have compared and analyzed them with by conventional hand work. As results, the measured performances based on the present system are more fast, precise and reliable then those of the conventional hand work. In addition to that, the system can apply for various optical collimators and filters.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.113-118
• /
• 1999

The design program of fitting and thrust block including various shapes and sizes was developed for the GMR project (Great Man-made River Project in Lybia). It can automatically recalculated the minimum size of fitting required for the structural performance and can also determine the proper size of fitting for the safe and economic design by users. It was found that the results of this program was accurate and efficient when it was compared to other references. This program is also developed with GUI (Graphic User Interface) technology for the convenience of users.

• Transactions of Materials Processing
• /
• v.9 no.2
• /
• pp.112-119
• /
• 2000

The roll Pass design is one of the most important processes to design the whole equipment of the rods and bars rolling system. In this study, the roll pass design program named TollRo(Rolling Factory Organizer) was developed. conventional methods to design roll pass were analyzed and a new algorithm to design the dimension of the intermediate groove was introduced. Object oriented programming technology was implemented in this design program. It comprises GUI(Graphic User Interface), function of automatic pass design, function of modifying pass schedule and database of material properties. The developed program can be used to design roll pass with consistency for the rods and bars rolling system. The man-hours for the whole design can be drastically reduced. The design parameters of rolling system can be extracted quickly by this program.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1069-1072
• /
• 1998

In this paper, the comparison and analysis of PTI and IEEE data formats are conducted. and the algorithm and the developed program for data conversion between these data formats are proposed. PTI and IEEE data formats are widely used as the input data form of the software program for power systems. However, they are composed of different formation with each other. So, it is necessary to convert between two formats in order to use more programs with different input data format. Numerical results of the power flow calculation of the test system show that developed program is effective and useful.

• Hwankyungkyoyuk
• /
• v.8 no.1
• /
• pp.98-106
• /
• 1995

A current environmental issue, 'Enviromentally Sound and Sustainable Development(ESSD)' is very important in that it is for our common future. Environmental education is essential as a long-term strategy to realize sustainable environments and society. So we developed a new program about ESSD. The purposes of development were as follows. First, introduce ESSD to students, second, make them know ESSD appropriate to our nation, third, make change from economy-centered thoughts to environmental economy-centered thoughts, ultimately make form behaviors related to ESSD. To verify the effects of new developed program, the direct learning was carried out by 212 students in total. Post test scores of experimental groups were significantly higher than those of control groups about four goals, respectively. Therefore this program is effective to achieve four goals of environmental education for ESSD.