• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4472-4476
• /
• 2023

In this study, it has been shown that the true coincidence summing correction factor can be obtained for the first time using the PHITS Monte Carlo program. Determining this correction factor using different methods and tools in each laboratory to increase the possibility of achieving high-efficiency measurement conditions is still popular in gamma-ray spectrometry. By using ¹³³Ba, ¹⁵²Eu, ¹³⁴Cs, and ⁶⁰Co point sources, the true coincidence summing factor was investigated in both near and far counting geometries for 15 different energy values. GESPECOR software was used to validate the results obtained with PHITS. A remarkable agreement was obtained between PHITS and GESPECOR, with a discrepancy of less than 3%. With this study, a new tool has been proposed to obtain the true coincidence summing factor, which is one of the significant correction factors investigated/calculated in gamma-ray spectrometric studies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2792-2799
• /
• 1996

It was shown in the previous study that the numerically derived elastic work factor for CLS specimen was independent of fiber direction for a unidirectional case. Also, it was proposed the elastic work factor could be used to determine energy release rate from a single test record. In the present study, elastic work factor was derived from a simple beam theory to investigate its dependence on material property and geometric condition. Also, the elastic work factor of CLS specimen was applied experimentally to determine critical energy release rate in order to prove its validity determining critical energy release rate from a single specimen. For this purpose, critical energy release rate determined using the elastic work factor was compared with that determined by the compliance method. The results showed that while elastic work factor is affected by $t_2/t_1$ and $L_2/L_1$ it is independent of fiber angle for a unidirectional case. It was also found that critical energy release rates determined by both methods are comparable each other, thus elastic work factor approach can be used to determine energy release rate from a single test specimen.

• Journal of dental hygiene science
• /
• v.2 no.2
• /
• pp.75-83
• /
• 2002

By extracting the variables related to the work stress generated from dental hygiene, identifying their relationships, this study aims to contribute to academic progress on work stress. The test results of this study are as follows for each hypothesis: 1. Among the work stress sensing factors, role ambiguity showed correlation to the active coping strategy and the passive coping strategy, whereas it did not have any correlation to the evasive reation. However, the physical resource environmental factor showed correlation to the active coping strategy, whereas it did not have any correlation to the other reation. 2. The passive coping strategy, among the work stress coping strategies, influences the role ambiguity, B type, work ambiguity, physical resource environmental factor by about 18.7%. 3. The active coping strategy, among the work stress coping strategies, influences the social support, role ambiguity, work place of health center factor by about 18.9%. 4. The evasive reaction, among the work stress coping strategies, was influenced by only the 36 years old over factor by approximately 4.2%. 5. It was found in all work stress sensing factors that the group with lower social support had a more degree of experiencing stress than the group with higher social support. In case of the behavior pattern, the type A experienced more stress than the type B only in role ambiguity. 6. It was found that the group with the higher social support tended to choose more active coping strategy than the lower social support. In case of behavior pattern, the type B coped more actively than type A in the passive coping strategy.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.4
• /
• pp.29-39
• /
• 2020

The purpose of this study is to investigate the determinants of blockholder presence in the Korean stock market. This study examines previous theories and studies, points that previous studies did not examine, and proposes two hypotheses. To verify two hypotheses, fundamental data were collected from firms listed on Korea Exchange from 2005 to 2017. As explanatory variables, we use the factors and characteristics of the firms used in the previous studies. Logistic regression analysis was conducted to test the determinants of blockholder presence. We find that firm size is the most distinctive factor determining the presence of blockholder, and firm idiosyncratic risk is the most similar factor determining the existence of each blockholder. Tobin Q shows significant value in family and government, and R&D intensity appears to be a negative related to the presence of blockholder in financial institutions. We also find that the determinant of blockholder presence differs from the mechanisms that govern each individual blockholder type when all blockholders grouped together. This suggests that there is blockholder heterogeneity within Korea listing firms. Our findings contribute to investors and policy makers who interested in the determinants of the presence of blockholder and blockhoder heterogeneity in Korea stock market.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.3
• /
• pp.129-134
• /
• 2004

The Available Transfer Capability (ATC) is defined as the measure of the transfer capability remaining in the physical transmission network for further commercial activity above already committed uses. The ATC determination s related with Total Transfer Capability (TTC) and two reliability margins-Transmission Reliability Capability (TRM) and Capacity Benefit Margin(CBM) The TRM is the component of ATC that accounts for uncertainties and safety margins. Also the TRM is the amount of transmission capability necessary to ensure that the interconnected network is secure under a reasonable range of uncertainties in system conditions. The CBM is the translation of generator capacity reserve margin determined by the Load Serving Entities. This paper describes a method for determining the TTC and TRM to calculate the ATC in the Bulk power system (HL II). TTC and TRM are calculated using Power Transfer Distribution Factor (PTDF). PTDF is implemented to find generation quantifies without violating system security and to identify the most limiting facilities in determining the network’s TTC. Reactive power is also considered to more accurate TTC calculation. TRM is calculated by alternative cases. CBM is calculated by LOLE. This paper compares ATC and TRM using suggested PTDF with using CPF. The method is illustrated using the IEEE 24 bus RTS (MRTS) in case study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.5
• /
• pp.758-771
• /
• 1998

Assessment of implant mobility is an important and reliable method to clinically evaluate implant stability. PerioTest is a precise and reproducible device that cam dynamically measure the reaction of damping characteristics of peri-implant tissue. The aim of this study is to evaluate the effects of amount of implant surface area, diameter, type, implantation site, degrees of cortical engagement, and length of time in function on PTVs and to find out the most determining factor on PTVs. The results are as follows 1. 5.0mm diameter implants show significantly lower PTV than that of 3.75mm diameter implants. 2. PTV in the mandible is significantly lower than that of the maxilla 3. In the maxilla, there is no significant difference in PTV during the first year of implant function, but during the second year a significant decrease in PTV is noted. 4. In the mandible, there is a significant decrease in PTV during the first and second year of implant function. 5. Implantation site seems to be the most determining factor on PTV among the influencing factors in this study. In conclusion, the amount of implant surface area, type, degrees of cortical engagement had no significant effect on PTV, but installation site and diameter influenced significantly on PTV

• Journal of Families and Better Life
• /
• v.31 no.6
• /
• pp.1-9
• /
• 2013

The purpose of this study was to investigate the relationships among control parenting, early adolescents' ego-resiliency and peer attachment. The subjects were 2,346 1st-year middle school students from all over the country. Korean Children and Youth Panel Survey(2010) data were analyzed by means of Pearson's correlation, hierarchical regression, and by the use of SPSS 19.0. The results of our study are as follows. First, parents' control parenting operated as a major determining factor with the effect that peer attachment decreased as parents' control parenting levels increased. Second, early adolescents' ego-resiliency operated as a major determining factor with the effect that peer attachment increased as adolescents' ego-resiliency levels increased. Finally, the interaction effects of parents' control parenting and early adolescents' ego-resiliency on peer attachment were observed.

• Journal of the Korean association of regional geographers
• /
• v.15 no.6
• /
• pp.689-706
• /
• 2009

It is usual to prioritize the spatial variables that influence housing location by a few specialist's experienced knowledge or intuition. Multiple regression techniques were used to evaluate the spatially prioritized relationships between housing density and seasonal solar intensity parameters for a total of 134 house locations. Solar radiation and duration of sunshine on winter solstice was the most important predictor of house density located in intermontane basin. In contrast to the typical theory, elevation, slope and accessibility to road were not a dominant determining factor upon the dependent variable of house density. A clear verification has been made for the hidden assumptions for the arrangement of typical Korean housing in intermontane basin that its approach is found to be more appropriate in avoiding shadow conditions, rather than exploring the ideal landform location.

• Economic and Environmental Geology
• /
• v.31 no.2
• /
• pp.141-147
• /
• 1998

Earth tide observations were taken at AMIST observatory in Seoul by LaCoste-Romberg ET gravimeter from September 2 to 16, 1997 for determining the gravimetric factor ($\delta$) and analyzing the tidal components. Meter drifts were corrected by regression and then denoised by threshholding wavelet, a data processing tool. The mean value of $\delta$ is 1.2 and the mean phase lag of & ($M_2$, $S_2$) and & $K_1$, $O_1$) is $0.07{\pm}0.03^{\circ}$ and $0.08{\pm}0.07^{\circ}$ by analyzing the observed earth tides. For yielding measurements of gravity accurate to about 0.01 mgal, the Earth tide observations are required by ET meter. The tidal variations are due to the planet's distance and zenith angle. With the exception of Earth-Moon and Earth-Sun mechanism, the possible causes of tidal variations are tectonical, meterological and hydrological perturbations. The long period and broad observations are required for determining the state of art gravimetric factor in Korea.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.341-349
• /
• 2009

This study compares the relative effectiveness of affective factor(Ad attitude) and cognitive factor(Brand cognition) on brand attitude among three ad types - direct comparative, indirect comparative, and noncomparative ads. The results showed that in direct comparative advertising context the brand cognition is dominant in determining brand attitude. In indirect comparative advertising context brand cognition is also dominant in determining brand attitude, but the difference is less than direct comparative advertising. In noncomparative advertising context the ads attitude is dominant in determining brand attitude. According to research outcomes, it could be said that direct comparative advertising is more effective than indirect comparative advertising.