• The Journal of Korea Robotics Society
• /
• v.7 no.2
• /
• pp.101-112
• /
• 2012

It is well-known that when singularities are located within the workspace of the parallel mechanism (PM), the usefulness of its workspace is significantly deteriorated. To handle this problem, we suggest an optimal design method which leads to more useful and larger workspace of the PM by taking its singularity locations into consideration in design process. Kinematic models of three selected planar PMs, a 5R type PM, a 3-RPR type planar PM, and a 3-RRR type planar PM, are derived via screw theory and their singularity analyses are conducted. Then workspace optimal designs for those three PMs are conducted to verify that the suggested design method leads more useful and larger workspace in which deterioration by singularity is minimal.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.129-135
• /
• 1999

We developed a new measuring equipment which makes it possible to perform on-line measurements with the merits of its implicity and the time-saving characteristics. By using the newly developed measurement system, the amount of aeration is directly measured on several parameters, i.e, engine speed, oil quantity, oil deterioration, oil temperature and viscosity, etc. It showed that oil aeration is strongly related to be gas movements in crankcase and the residence time of circulating oil in oil pan. In addition, in order to clarify the mechanism of aeration and to quantify the degree of aeration, a modelling analysis to predict aeration was performed , and as a guiding parameter, Aeration Index was defined. Finally, the parameter was compared with the actual amount of aeration, and it was confirmed that they gave a good correlation with each other.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.70-78
• /
• 2012

The Annals of Joseon Dynasty, which recorded governmental affairs for 472 years (AD 1392-1863) during the Joseon dynasty is an representative paper cultural heritage in Korea. Being recognised their authenticity and values they were designated as the No 151 national treasure of Korea in 1973 and registered as 'The Memories of the World' by UNESCO in 1997. Unusually, some volumes of the Annals were treated by beeswax for the permanent preservation. However, the examinations on the deterioration of the beeswax-treated volumes had been exposed the serious damage than the untreated volumes. In particular, the larger amount of beeswax were worst in deterioration condition. In order to solve these problems, NRICH(National Research Institute of Cultural Heritage) of Korea launched the investigation study for the conservation of beeswax-treated volumes of the Annals. Now then, the five study areas have been set up; 1) to understand the damaged condition of the Annals; 2) to analyse the raw materials and production techniques; 3) to test the degradation degree using the duplication samples for understanding the aging factors and mechanism; 4) to develop the conservation techniques through dewaxing and thereafter strengthening the base paper of Hanji; 5) to develop the long-term storage technique using inert gases. On the basis of outcomes from this study, NRICH will plan to establish the systematic conservation and management plan for the beeswax-treated volumes of the Annals in future.

• Economic and Environmental Geology
• /
• v.46 no.5
• /
• pp.445-453
• /
• 2013

The Uiseong Tapriri Five-Storied Stone Pagoda (National Treasure No. 77) is typical stone cultural heritage in Unified Silla Dynasty, Korea. The pagoda has been occurred black, brown discoloration and microcrack, exfoliation, granularity decomposition with white discoloration because of continuous weathering. As the results of analysis for the contaminants, chemical weatherings are generated that black contaminant by manganese oxide, brown contaminant by iron oxide, white contaminants by gypsum and taranakite. And physical weatherings, such as microcrack, exfoliation, are occurred by salt(gypsum) crystallization. Therefore, these need to remove the contaminants according to the conservation treatment manual, and regular monitoring using P-XRF to preserve long-term the Five-Storied Stone Pagoda at Tapri-ri, Uiseong.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.7
• /
• pp.849-854
• /
• 2001

Delayed cerebral infarction after resection of craniopharyngioma is a uncommon entity, but leads to high morbidity and mortality. We present 3 such cases and discuss the etiology and pathogenesis with review of pertinent literatures. In our cases, delayed deterioration of consciousness was observed in all cases. All of them expired. The cause may be multifactorial and the surgical approach may contribute to the pathogenesis of delayed cerebral infarction. We suspect vasospasm might be the major mechanism of pathogenesis. Vessels were primed to spasm during operation due to blood in the cistern or mechanical injury. Vasoactive materials may have been liberated from the pituitary stalk or injured hypothalamus, either at the time of surgery, or later, after portions of tumor have undergone necrosis. The high degree of suspicion to detect vasospasm should be done in the case of the delayed deterioration of mental status at an early stage of craniopharyngioma surgery. Possible mechanism underlying this delayed cerebral infarction are discussed.

• Steel and Composite Structures
• /
• v.21 no.2
• /
• pp.357-371
• /
• 2016

Column base connections are critical components in steel structures because they transfer axial forces, shear forces and moments to the foundation. Exposed column bases are quite commonly used in low- to medium-rise buildings. To investigate shear transfer in exposed column base plates, four large scale specimens were subjected to a combination of axial load (compression or tension) and lateral shear deformations. The main parameters examined experimentally include the number of anchor rod, arrangement of anchor rod, type of lateral loading, and axial force ratio. It is observed that the shear resisting mechanism of exposed column base changed as the axial force changed. When the axial force is in compression, the resisting mechanism is rotation type, and the shear force will be resisted by friction force between base plate and mortar layer. The specimens could sustain inelastic deformation with minimal strength deterioration up to column rotation angle of 3%. The moment resistance and energy dissipation will be increased as the number of anchor rods increased. Moreover, moment resistance could be further increased if the anchor rods were arranged in details. When the axial force is in tension, the resisting mechanism is slip type, and the shear force will be resisted by the anchor rods. And the shear resistance was reduced significantly when the axial force was changed from compression to tension. The test results indicated that the current design approach could estimate the moment resistance within reasonable acceptance, but overestimate the shear resistance of exposed column base.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.922-927
• /
• 2006

There is a concern with worldwide deterioration of highway bridges, particularly reinforced concrete. The advantages of fibre reinforced plastic(FRP) composites over conventional materials motivate their use in highway bridges for replacement of structures. Recently, an FRP deck has been installed on a state highway, located in New York State, as an experimental project. In this paper, a systematic approach for analysis of this FRP deck bridge is presented. Multi-step linear numerical analyses have been performed using the finite element method to study the structural behavior and the possible failure mechanism of the FRP deck-superstructure system Deck's self-weight and ply orientations at the interface between steel girders and FRP deck are considered in this study. From this research, the results of the numerical analyses were corroborated with field test results. Analytical results reveal several potential failure mechanism for the FRP deck and truss bridge system The results presented in this study may be used to propose engineering design guideline for new and replacement FRP bridge deck structure.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.152-163
• /
• 2005

Lipid peroxidation is a primary cause of quality deterioration in meat and meat products. Free radical chain reaction is the mechanism of lipid peroxidation and reactive oxygen species (ROS) such as hydroxyl radical and hydroperoxyl radical are the major initiators of the chain reaction. Lipid peroxyl radical and alkoxyl radical formed from the initial reactions are also capable of abstracting a hydrogen atom from lipid molecules to initiate the chain reaction and propagating the chain reaction. Much attention has been paid to the role of iron as a primary catalyst of lipid peroxidation. Especially, heme proteins such as myoglobin and hemoglobin and "free" iron have been regarded as major catalysts for initiation, and iron-oxygen complexes (ferryl and perferryl radical) are even considered as initiators of lipid peroxidation in meat and meat products. Yet, which iron type and how iron is involved in lipid peroxidation in meat are still debatable. This review is focused on the potential roles of ROS and iron as primary initiators and a major catalyst, respectively, on the development of lipid peroxidation in meat and meat products. Effects of various other factors such as meat species, muscle type, fat content, oxygen availability, cooking, storage temperature, the presence of salt that affect lipid peroxidation in meat and meat products are also discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.322-329
• /
• 2009

Machinability of LAM(Laser Assisted Machining) has been studied for ceramics such as $Al_2O_3$, $Si_3_N4$ and $ZrO_2$ by $CO_2$ laser. It was possible to remove ceramics by PCBN tool because material became softening and deterioration by local laser beam irradiation. The advantage of LAM is the ability to produce larger material removal rates and tool life. But, for cutting of $Al_2O_3$ and $ZrO_2$, stage of laser power control was needed owing to thermal shock with high temperature of workpiece by laser power. And when $Si_3N_4$ was machined by LAM, $N_2$ gas spouted from surface of one cause of high temperature. Characteristics of LAM were analyzed using pyrometer, dynamometer, SEM and EDS to measure temperature of workpiece surface, cutting force, variation of machining surface and structure of lattice respectively. As the result of this study, it was found that machinability of LAM for ceramics in $CO_2$ laser and mechanism of LAM was different according to the kind of ceramics because of properties of materials.

• Journal of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.9-15
• /
• 2001

The low-durability performance of concrete structure occurs by interactive deterioration factors. In particular, carbonation increased with its time elapse is known as the general manner of deterioration characteristics. Recently, the fundamental researches of the carbonation mechanism, besides method and technique for durability improvement of deteriorated structure are advanced actively. So in this paper, alkali-recovery and maintenance performance when the impregnating alkalization agents are used, are compared and examined quantitively with the basis of past proposed study. As a result, alkali-recovery performance be ensured by impregnating alkalization agent on the carbonated concrete which has low pH by accelerated carbonation test. And alkali maintenance performance was effected by the finishing materials on the alkali recovered concrete.