• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.882-896
• /
• 2023

Pupose: The purpose is to prepare safety management and seismic reinforcement measures that can effectively improve the potential risks of earthquake-resistant design and the deficiencies of safety guidance and inspection of factory facilities in national industrial complexes. Method: In this study, problems and improvement measures were derived through investigation and analysis of overall earthquake disaster safety management, such as safety management status and management system in preparation for earthquake disasters in national industrial complexes. was implemented to suggest improvement plans based on facility types and structural characteristics. Result: In conclusion, the problems of safety management and seismic reinforcement in preparation for earthquake disasters in national industrial complexes were summarized and classified into four types (seismic performance evaluation and related system supplementation, authority of tenant companies and local governments, seismic reinforcement and safety management support measures, organizational structure capacity building) to derive improvement measures. Conclusion: Based on this, seismic reinforcement measures that companies in national industrial complexes should implement in preparation for earthquake disasters were prepared, and detailed plans for each measure were presented.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.121-131
• /
• 2024

This research explores the potential of leveraging unstructured data from construction supervision documents, which contain detailed inspection insights from independent third-party monitors of building construction processes. With the evolution of analytical methodologies, such unstructured data has been recognized as a valuable source of information, offering diverse insights. The study introduces a framework designed to assess cost performance by applying advanced analytical methods to the unstructured data found in final construction supervision reports. Specifically, key phrases were identified using text mining and social network analysis techniques, and these phrases were then analyzed through binomial logistic regression to assess cost performance. The study found that predictions of cost performance based on unstructured data from supervision documents achieved an accuracy rate of approximately 73%. The findings of this research are anticipated to serve as a foundational resource for analyzing various forms of unstructured data generated within the construction sector in future projects.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.845-849
• /
• 2024

Currently, rail surface defects are increasing due to the aging of urban railway rails, but in the detailed guidelines for track performance evaluation established by the country, rail surface damage is inspected with the naked eye of an engineer and with simple measuring tools. It is very important to discover defects in the rail surface through periodic track tours and visual inspection. However, evaluating the severity of defects on the rail surface based on the subjective judgment of the inspector has significant limitations in predicting damage inside the rail. In this study, the characteristics of cracks inside the rail due to rail surface damage were studied. In field measurements, rail surface damage was selected, old rail samples were collected in the acceleration and braking sections, and a scanning electron microscope (SEM) was used to evaluate the rail surface damage was used to analyze the crack characteristics. As a result of the analysis, the crack mechanism caused by the running train and the crack characteristics of the acceleration section where cracks occur at an angle rising toward the rail surface were experimentally proven.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.4
• /
• pp.555-565
• /
• 2024

The government has enacted legislation to enforce selective dismantling in order to increase the recycling of construction waste. Therefore, this study aims to propose a standard quantity per unit estimation method, crucial for determining the expenses associated with large-scale demolition projects necessary for public development, particularly in the context of extensive land development ventures. Four individual houses were thoroughly examined and tested. We surveyed the house to create a floor plan and conducted a detailed investigation of interior materials in order to propose a Standard Quantity per Unit for cost estimation of the selective dismantling work. The process encompassed precise measurement of the houses, creation of schematics, thorough scrutiny of interior materials, and division of the dismantling process into components such as ceilings, walls, and floors. The duration of each dismantling task was meticulously documented. Particular emphasis was placed on refining the methodology to accommodate factors such as window openings, thereby ensuring a heightened level of precision compared to preceding studies. The outcomes of this study are anticipated to serve as practical benchmarks for estimating costs in demolition projects, thereby fostering sustainable development within the construction industry.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.479-499
• /
• 2019

State assessment of an operational tunnel is usually done by performing visual inspection and durability tests by following the detailed guideline for safety inspection (SI) and/ or precision inspection for safety and diagnosis (PISD). In this study, 12 NATM tunnels, which have been operational for more than 10 years, were inspected to figure out the cause of longitudinal cracks for the purpose of modifying the scoring items in the state assessment NATM tunnel related to the longitudinal crack and the thickness of concrete lining. All investigated tunnels were classified into four groups depending on the shape and usage of each tunnel. The causes of longitudinal crack occurrence were analyzed by investigating the correlations between the longitudinal crack and the following four factors: the patterns of ground excavation; construction state of primary support system; characteristics of material properties of the concrete lining; and thickness of lining which was obtained by Ground Penetration Radar (GPR) tests. It was found that influencing factors causing longitudinal cracks in the lining were closely related with the construction condition of the primary support system, i.e. shotcrete, rockbolt, and steel-rib; crack occurrences were not much affected by the excavation patterns. As for the properties of concrete lining materials, occurrence of the longitudinal crack was mostly affected by the following three items: w/c ratio; contents of cement; and strength of lining. When estimating the lining thickness of the concrete lining by GPR tests and taking thickness effect into account in the statement assessment, it was concluded that increase of the index score by an average of 0.03 (ranging from 0.01 up to 0.071) is needed; a more realistic way of state assessment should be proposed in which the increased index score caused by lack of lining thickness should be taken into account.

• Journal of Animal Science and Technology
• /
• v.62 no.5
• /
• pp.682-691
• /
• 2020

Careful cleaning and disinfection of pigpens is essential to prevent disease spread and avoid the resultant economic losses. Hygiene in pigpens is generally evaluated by visual monitoring supplemented with bacteriological monitoring, which includes counting the total aerobic bacteria (TAB) and/or fecal indicator bacteria (FIB). However, these methods present drawbacks such as time and labor requirements. As adenosine triphosphate (ATP) is ubiquitous in all living organisms including microorganisms, this study aimed to directly compare the results of microbial assessment and ATP quantification, and to suggest possible detailed application methods of the ATP test for hygiene evaluation in pigpens of a farrowing unit. Before and after standard cleaning procedures, samples were collected from the floor corner, floor center, and feeding trough of four pigpens at different time points. No FIB were detected and both the TAB and ATP levels were significantly decreased in the floor center area after cleaning. FIB were continuously detected after cleaning and disinfection of the floor corners, and there was no significant ATP level reduction. The feeding trough did not show any significant difference in these values before and after cleaning, indicating insufficient cleaning of this area. The levels of TAB and ATP after cleaning were significantly correlated and the average ATP value was significantly lower in the absence of FIB than in their presence. In the absence of standard references, a more thorough hygiene management could be achieved evenly by supplementing cleaning or disinfection based on the lowest ATP results obtained at the cleanest test site, which in the present study was the floor center. Overall, these results indicate that the on-farm ATP test can be used to determine the cleanliness status, in addition to visual inspection, as an alternative to laboratory culture-based testing for the presence of microorganisms.

• Korea Journal of Hospital Management
• /
• v.13 no.1
• /
• pp.42-64
• /
• 2008

This study was conducted to evaluate the quality in medical records by analyzing its completeness through setting up the level of record on the patient's past history and through examining the actual medial records. Targeting the information on the patient's past history in interns' records, residents' records and nurses' records toward 403 inpatients who were admitted first in 2004 at an university hospital due to stomach cancer. We analyzed whether the charts were recorded or not, recording level, the satisfaction with the expectant level of the records in the hospital targeted for a research and the level of agreement. The results were as follows; first, as for the rate of recording those each items, they were high in the chief complaint & present illness and the past illness history. Depending on the group of recorders, the recording rate showed big difference by items. Second, as a result of measuring the level after dividing the recording level of items for the patient's past history from Level 1 to Level 4 by each item, the admission history, the past illness history, and the family history were about Level 3, and the smoking history, the medication history, the chief complaint & present illness, the drinking history and allergy were about Level 2. In the admission department, it was excellent in the interns' records for the medical department. Third, as a result of its satisfactory level by comparing the expect level of a record and the actual record by item in information on the patient's past history, which was expected by the medical-record committee members of the hospital targeted for a study. And forth, we analyzed the level of agreement with Kappa score in the level of 'Yes' or 'None' related to the corresponding matter in Level 1, in terms of information on the past history in the intern's record, the resident's record, and the nurse's record. The level of agreement in the resident's record & the nurse's record, and in the intern's record & the resident's record was from "excellent" to "a little good". There were differences in the level of completeness and in reliability for the information on the past history by the recorder group or by the admission department. The encounter process that was performed by the admission department or the recorder group, indicated the result that was directly reflected on the quality of medical records, thus it was required further study about the medical record documentation process and quality of care. The items that showed the high recording rate quantitatively were rather low, consequently we'd should develop the tool for the qualitative inspection and evaluate the medical records further. And the items were needed to be detailed in the record level were rather low, and hence there needed to be a documentation guideline and education by the clinical departments.

• Journal of the Korean Society of Costume
• /
• v.65 no.1
• /
• pp.46-60
• /
• 2015

This study analyzed the process of development and verification of standards through the competency analysis of fashion accessories products in the development of 'National Competency Standards'(NCS), which was carried out in 2013 for the fashion industry. The NCS for fashion accessories production was developed through three Focus Group Interviews (FGIs) and fashion accessories production was defined as "the process of design, development and manufacture intended to produce items that improve the degree of completion of fashion products that are produced from textile fabric, knitted fabric, leather and other materials such as bags, belts, hats, gloves, scarves, neckties and socks with the exception of clothes". The competency unit for fashion accessories production was analyzed in 11 categories: development of design; development of materials; production of prototype samples; calculation of cost; determination of mass production model and price; planning of main manufacture process; ordering of materials; planning for mass production; preparation for mass production; mass production; and inspection of completed products, and the verification was carried out on development outcomes through a survey carried out of on-site personnel. This study recommends the following direction for future improvements based on an analysis of the development process of the NCS for fashion accessories production. First, future development of standards should first provide a rational category system for each area of fashion good production based on the production process, which should be followed by a detailed competency survey. Second, in order to ensure a more efficient verification survey, an expert for each competency unit should be designated for the develop standard to induce a more sincere response. Also the questionnaire should require supplementation in order to collect the various additional opinions of experts of the field. Finally, this study concludes that it is urgent to procure an education infrastructure and specialized professors in order to apply the competency standard for fashion accessories production to the education sector. This study also concludes that the government will be required to provide systematic and consistent support aimed at supplementing development and forming a firm collaborative working environment for the industry and academia in order to improve the current education environment and build a more field-oriented education environment.

• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.165-170
• /
• 1993

The average concentration of Pb in 53 samples of canned orange juice currently sold in Korean market was 0.225 mg/kg, and that of Sn, 40.7 mg/kg. There was no appreciable difference in Pb concentration according to elapsed time after manufacturing, whereas Sn concentration increased 0.66 mg/kg per month. During the storage at room temperature or in refrigerator after opening, the Pb concentration increased slowly, reaching 1.7 to 1.8 times of original concentration, whereas Sn concentration increased by 20% per day, resulting in 3 times of original concentration after 7 days. There were no serious changes in Pb and Sn concentration in storage at room temperature or refrigerator for 3 days, when juice samples were opened and transferred to glass container. It is needed that detailed inspection by undertaken to monitor the contents of heavy metals in canned orange juice, since 18% of samples within recommended distribution period exceeded the legal standard for Pb, and recommended that more attention be paid in handling canned orange juice after opening, in order to avoid the hazard from heavy metals.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.122-129
• /
• 2009

Recently much attention has been paid to a guided wave due to its effective applicability to long range and fast inspection of structures. In guided wave based NDE, the appropriate selection of wave modes is one of important factors since the test performance is highly dependent on which mode of guided waves is employed. As far as plate-like structures are concerned, so far, SH guided wave has not been frequently applied compared to Lamb waves, which is mostly caused by the lack of proper and convenient transducers to generate and measure the SH waves. In this investigation, a new small-sized SH guided wave transducer based on magnetostriction is proposed. The present transducer was designed to be modular and be used with shear couplant to avoid the inconvenience of the existing magnetostrictive patch transducers, which comprises the ferromagnetic patch tightly bonded to a structure. The wave transduction mechanism and the detailed configuration of the present transducer are presented. Experimental verification is also conducted on test specimens and the results confirm the good performance of the present transducer module.