• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.388-392
• /
• 2003

In this study, various railroad geotechnical informations were standardized. The standardization was progressed by classifying the informations as basic properties, railroad vibrations and design plans. Basic informations included soil properties(27), dynamic property(1), geophysical prospecting(1), and elastic wave prospecting(4). Specification for 'human exposure to whole-body vibration' was used to construct the information of railroad vibration. And in the case of the information of design plan, the way to save by graphic files was chosen. Thus standardized informations examined their application by setting up database. Entity-Relation(E-R) model was used in the design of database and by this, the database system was constructed. This database system will be able to serve the performance enhancement of railroad system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권6호
• /
• pp.266-271
• /
• 2001

In this paper, a controller design for coreless linear synchronous motor is proposed. The designed controller is mainly composed of speed and current control, which are carried out by the high-speed digital signal processor(DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented using by 32-bit DSP(TMS320C31), a high-integrated logic device(EPM940), and IPM(Intelligent Power Modules) for compact and powerful system design. The experimental results show the effective performance of controller for coreless linear synchronous motor.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1746-1755
• /
• 2003

Operating characteristics of a triple pressure reheat HRSG are analyzed using a commercial software package (Gate Cycle by GE Enter Software). The calculation routine determines all the design parameters including configuration and area of each heat exchanger. The off-design calculation part has the capability of simulating the effect of any operating parameters such as power load, process requirements, and operating mode, etc., on the transient performance of the plant. The arrangement of high-temperature and intermediate-temperature components of the HRSG is changed, and its effect on the steam turbine performance and HRSG characteristics is examined. It is shown that there could be a significant difference in HRSG sizes even though thermal performance is not in great deviation. From the viewpoint of both economics and steam turbine performance, it should be carefully reviewed whether the optimum design point could exist. Off-design performance could be one of the main factors in arranging components of the HRSG because power plants operate at various off-design conditions such as ambient temperature and gas turbine load, etc. It is shown that different heat exchanger configurations lead to different performances with ambient temperature, even though they have almost the same performances at design points.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.692-697
• /
• 2010

In this paper, a design program for electric railway pole foundation was developed by applying the estimation study performed by Korean Railway. There are two kinds of shapes in the cross-section of electric railway pole foundation: rectangle and circle. In foundation designing, The rectangular foundation should be satisfied with vertical, horizontal and moment equilibrium equations. On the other hand, the circular foundation should be satisfied with horizontal and moment equilibrium equations. The design program was coded into MFC(Microsoft Foundation Class) by MS Visual C. The equation's roots in the program were obtained by Incremental Search method. Dialog and property sheet(Wizard Mode) input windows were selected for user-friendliness. The biggest advantage of this program is to find an optimum depth in a given section.

• 대한조선학회논문집
• /
• 제45권4호
• /
• pp.462-467
• /
• 2008

In this paper, we investigated the design method of mooring system in ultra deep sea and carried out the conceptual design for offshore West Africa oil field in ultra deep sea of 3000 meters. Recently, it was feasible to design and install the offshore floating structures in deep sea of up to 2000 meters. Due to the simplicity, two-point mooring design is fully utilized. Force-excursion curves are throughly examined to find out the feasibility of various combinations of mooring lines. Free length and pretension effects are discussed. It is found that composite materials including synthetic fiber rope may be good solution for ultra deep sea mooring design.

• 플랜트 저널
• /
• 제10권4호
• /
• pp.29-34
• /
• 2014

본 연구에서는 배관설계항목을 조사하여 전문가 면담 및 설문을 통해 주요 설계항목을 도출하였고, 이를 국내외 사례 프로젝트에 적용하여 주요 배관설계 항목별 비중 및 비용변동 범위를 조사하였다. 조사결과를 바탕으로 몬테카를로 시뮬레이션을 활용하여 배관설계비 전체에 대한 비용변동 범위를 분석하여 유사 프로젝트 수행 시 입찰단계에서 합리적인 입찰금액 산정 및 입찰참여에 대한 타당성을 검토할 수 있는 방안을 제시하였다.

• 한국주거학회논문집
• /
• 제21권1호
• /
• pp.1-9
• /
• 2010

Housing problems in city have being caused social contradiction that contains social discord and conflict between poor and rich. And they have raised one of social problems including a disequilibrium of demand and supply, a housing trouble, and a poor residential environment. Therefore, the purpose of this study is to suggest to the improvement of social housing that exposes to a poor environment for social integration. For this, this study is to extract environmental-friendly design factors for each building phase by in-depth evaluation of experts, and to analyze the problems of domestic social housing and environment-friendly design factors considered prior literature. The results as follow. It might be considered highly phase of schematic design, The building construction, and performance management having factors. Specially, it analyzed to 'Living Environment', 'Economic Efficiency', and 'renewable Energy Systems' should be considered highly. Ultimately, this study would be reconsidered the improvement of social housing proposed by the Government for the social outcast.

• Design & Manufacturing
• /
• 제9권3호
• /
• pp.9-13
• /
• 2015

Plastic material has been applied to many automobile parts with the automotive lightweighting trend. In this study, a passenger air bag(PAB) housing which is produced by steel material in the present were molded using a plastics material. Before design and making of a mold for the PAB housing molding, it was carried out injection molding analysis. By analyzing the deformation results, the correction dimension for mold designing was determined. The design and manufacturing the mold applied the correction dimension were conducted. It was performed actual injection molding. The warpage value of the PAB housing was similar to the warpage of the injection molding analysis.

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.13-19
• /
• 2010

A design method of railway wheel profile with objective function of equivalent conicity considering wheel dimension constraint, two points contact problem between wheel and rail was proposed. New design method shows good results. New wheel profile generated from optimization process shows better dynamic performance compared with initial profile as the purpose of wheel profile design. And to verify the design method with testing the stability of new wheel profile, we conducted a critical speed test for new wheel profile using scale model applied scaling method of railway vehicle dynamics. The result of critical speed test show good agreement with that of numerical analysis. From the above results, it is seen that the design method with objective function of equivalent conicity is feasible and it could be applied to design new wheel profile efficiently.

• 항공우주기술
• /
• 제3권1호
• /
• pp.277-286
• /
• 2004

스마트 사업단에서 비행체개념으로 적용하고 있는 틸트로터 형상의 설계 특성 및 주요 사이징 변수에 대해 그간에 선진 항공업체에서 진행된 방대한 연구 결과를 종합적으로 정리하고 다른 수직이착륙 비행체와 대별되는 틸트로터 비행체의 특성을 분석, 정리하였다. 또한 스마트무인기 개발 사업단 자체적으로 수행한 개념설계와 진행중인 기본설계 결과 확인된 틸트로터 비행체 설계의 특성 및 주요 고려사항들을 정리하였다. 이 논문은 틸트로터 비행체 설계특성과 기술적 고려사항에 대한 종합적인 이해를 갖고자 하는 이들에게 큰 도움이 될 것이다.