• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.2
• /
• pp.61-69
• /
• 1981

The paddies in the hillsides in Gonggeun-myeon, Hoingseong-gun, Kangweon-do keep a steep slope and run in and out. A land consolidation in such an area, therefore, will require high ratio of land loss and a large amount of earth moving if it follows the existing design criteria to separate drainage and irrigation ditches in a scheme. Due to the consequent decrease in construction cost, the project has not been envisaged. in order to secure the introduction of small-medium size farm machineries into the paddies, farm plots were planned to be straight and drainage with taking care of topography. Findings from the comparison of methodologies are as follows. 1. In places with a solpe of more than 1/30, a reduction in earth moving can be expected with parallel plots to the contours. 2, For the sake of effective using of farm machineries, it is thought that a plot should be running straight parallel to the contours and the ratio of length and width of a plot be more than six. 3. In places with a slop of more than 1/10, a reduction in earth moving and a effective introduction of farm-machineries can he expected with straight parllel plots to the contours. But it is undesirable to introduce a scheme in this places because of the difficulties in acreage computation and farmers' hesitation. 4. The system with a canal for both irrigation and drainage is highly effective to decrease the ratio of land loss as well as construction cost. 5. Parallel plots to the contours and a canal for both irrigation and drainage are highly effective in the decrease in construct cost. 6. To avoid the subdivision of a cooperation in farming is desirable of a plots, has more than two owners.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.396-410
• /
• 2018

To assist operators to properly assess the current situation of the plant, accurate fault diagnosis methodology should be available and used. A reliable fault diagnosis method is beneficial for the safety of nuclear power plants. The major idea proposed in this work is integrating the merits of different fault diagnosis methodologies to offset their obvious disadvantages and enhance the accuracy and credibility of on-line fault diagnosis. This methodology uses the principle component analysis-based model and multi-flow model to diagnose fault type. To ensure the accuracy of results from the multi-flow model, a mechanical simulation model is implemented to do the quantitative calculation. More significantly, mechanism simulation is implemented to provide training data with fault signatures. Furthermore, one of the distance formulas in similarity measurement-Mahalanobis distance-is applied for on-line failure degree evaluation. The performance of this methodology was evaluated by applying it to the reactor coolant system of a pressurized water reactor. The results of simulation analysis show the effectiveness and accuracy of this methodology, leading to better confidence of it being integrated as a part of the computerized operator support system to assist operators in decision-making.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.4
• /
• pp.317-323
• /
• 2001

DICOM(Digital Imaging and Communications in MediCine), standard of medical image operation, present the methods for communications and Storage of Medical Image. medical image acquired from patient in hospital made DICOM files. this paper purposes design and implementation methodologies of a web-based medical information system that consists of DICOM (Digital Imaging and Communications in Medicine) databases and functional components of a web server in order to support the access of medical information with Intemet web browser. we store the patient and image information to database using reading the group and element oJ DICOM file. we made file transfer module by implementing DICOM Store service, in result, we can transfer DICOM file to IF based host or computer. We compose web component of communications and Storage service, user be used DICOM Service by web Browser.

• Journal of Korea Trade
• /
• v.23 no.3
• /
• pp.20-37
• /
• 2019

Purpose - The purpose of this paper is to analyze the trade structure and competitiveness of China's information technology (IT) industry in comparison to that of Korea and the United States, particularly in terms of quality. Design/methodology/approach - Indices such as trade specialization index (TSI), Revealed Comparative Advantage (RCA), and Market Comparative Advantage (MCA) are used. Further, an Intra-industry Trade (IIT) index is used to analyze qualitative changes in horizontal intra-industry trade and intra-industry trade of high- and low-quality goods. Findings - China's IT industry has a comparative competitive advantage over that of Korea and the United States, and mainly exports goods of inferior quality and imports goods of superior quality. Further, China's horizontal intra-industry trade has been decreasing, while its vertical intra-industry trade has been increasing and vertical trade of inferior quality goods outweighs that of superior quality goods. This shows that China is rapidly catching up with Korea and the United States, even though its qualitative competitiveness has not significantly improved. Research limitations/implication - This study has academic and political implications, as it analyzes changes in China's IT trade competitiveness. However, it is somewhat limited as factors determining qualitative aspects has not been considered. Originality/value - Most studies aggregate analyses of export competitiveness using methodologies such as TSI, RCA, and market share. However, the focus of these methods is price competitiveness. Hence, an examination of the objective and qualitative trade competitiveness of China's IT industry is necessary. this study the trade structure and quantitative competitiveness of the industry by analyzing intra-industry trade focusing on the quality of competitiveness. Therefore, the changes in China's IT industry in the USA and Korea and in foreign trade competitiveness and quality competitiveness are clarified. The results show that the academic and policy implications of these changes in the IT industry will be a useful resource. This is the first study in Korea to attempt such an analysis. This is the first study in Korea to attempt such an analysis.

• Journal of Korea Trade
• /
• v.24 no.8
• /
• pp.19-38
• /
• 2020

Purpose - The Korean government has been promoting the New Southern Policy (NSP) prior to the onset of the COVID-19 pandemic, which damage global value chain (GVC). The purpose of this paper is to emphasize that the NSP should be developed to provide tangible support in corporate GVC adjustment, away from diplomatic activities in order to offset GVC losses due to COVID-19 and expand export capabilities. Design/methodology - Two research methodologies are combined for this paper: A computational general equilibrium (CGE) model is used to estimate the impacts of the COVID-19 pandemic and NSP on Korea's exports, and the decomposition methodology (Wang, Wei and Zhu, 2013) to evaluate the stability of GVC. The conventional CGE model was modified to obtain an estimate for decomposition. The research methodology adopted in this study was attempted for the first time, and it can be widely used in future GVC research. Findings - Results found the effects of COVID-19 reduced Korea's total exports by 27% and GVC by more than 30%. In particular, VA in Korea's exports to the NSP region was found to have a huge impact in heavy industries and textiles, and its exports to Vietnam seemed to suffer the largest loss in GVC among ASEAN countries. If the NSP is implemented properly, it appears that it could offset much of the negative impacts of COVID-19, implying the importance of the effectiveness of the NSP. Originality/value - Many papers have assessed the NSP descriptively, and the GVC has been a topic for many publications. However, the impact of COVID-19 on Korea's GVC with the NSP countries has not been quantitatively studied. This paper emphasizes that the NSP should be pursued based on the results of quantitative analysis. In addition, the research methodology of this paper can be used for other GVC research with relevant modifications.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.59-66
• /
• 2021

This study is to verify the effectiveness of initial planning verification using paper prototyping while methodologies are being developed to verify the direction of game planning in a short time at low cost since it is having a hard time to verify the direction and fun of the game by taking a lot of capital and time in the initial planning process as the game development becomes larger. It conducted paper prototyping production for about 40 students who are learning game planning for a semester, and trained them on how to motivate using core mechanical diagrams, scrums, and basic psychological needs that can effectively materialize the ideas of their early game planning. Through this curriculum, board games were completed with eleven paper prototyping, and it was confirmed that students who participated in the class were meaningful in verifying fun and securing gameability through cross-play.

• Journal of Korea Trade
• /
• v.25 no.6
• /
• pp.78-104
• /
• 2021

Purpose - Semiconductors are a significant export item for Korea that is expected to continue to contribute significantly to the Korean economy in the future. Thus, the semiconductor industry is a critical component in the 4th Industrial Revolution and is expected to continue growing as the non-face-to-face economy expands as a result of the COVID-19 pandemic. In this context, this paper aims to empirically investigate how semiconductors are imported and exported in Korea from a global supply chain perspective by analysing import and export data at the micro-level. Design/methodology - This study conducts a multifaceted analysis of the global supply chain for semiconductors and related equipment in Korea by examining semiconductor imports and exports by semiconductor type, year, target country, mode of transportation, airport/port, and domestic region, using import/export micro-data. The visualisation, flow analysis, and Bayesian Network methodologies were used to compensate for the limitations of each method. Findings - Korea is a major exporter of semiconductor memory and has the world's highest competitiveness but is relatively weak in the field of system semiconductors. The trade deficit in 'semiconductor equipment and parts' is clearly growing. As a result, continued investment in 'system semiconductors' and 'semiconductor equipment and parts' technology development is necessary to boost exports and ensure a stable supply chain. Originality/value - Few papers on semiconductor trade in Korea have been published from the perspective of the global supply chain or value chain. This study contributes to the literature in this area by focusing on import and export data for the global supply chain of the Korean semiconductor industry using a variety of approaches. It is our hope that the insights gained from this study will aid in the advancement of SCM research.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.187-195
• /
• 2019

There is a growing emphasis on objective and quantified performance measurement methodologies for the interactions that occur within modern companies. This is due to the importance of establishing and practicing future-oriented strategies by estimating the present value of the company and the current energy status through objective evaluation of the company. Therefore, the selection of KPI as a performance index using BSC (Balance Scorecard), which is a recent objective performance measurement methodology, has become very important. Although many studies on existing KPIs have been made in various industries, KPI studies on SI companies have been insufficient. This study focuses on finding KPIs applicable to SI companies. The study on the KPI design system according to general strategy of SI companies and the development of methodology and evaluation index according to index development for each group were carried out and the weighting methodology according to each evaluation index was presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1110-1116
• /
• 2019

With the rapid development of scientific technologies and the appearance of new industrial areas, the 4th industrial revolution is rapidly progressed while new values are created and realized by the conversion between industries. The researcher wrote the main questions through the preceding research on domestic and overseas major new technology convergence products and services. The researcher planned the in-depth interview, which is one of the qualitative research methodologies, and conducted the Kano method questionnaire that can embody multidimensional and strategic judgment rather than grasp fragmentary preference trends. According to the results, In addition to strengthening the technical capabilities of the VR/AR game industry, policy needs to raise professional manpower have been raised. Practical workforce development through close collaboration between industry and educational institutions, and continuous supply of human resources through retraining of existing game contents personnel. It gave direction to the creation of new jobs in the VR/AR game industry.

• The Journal of Information Systems
• /
• v.27 no.4
• /
• pp.1-33
• /
• 2018

Purpose The purpose of this study is to review topic and survey methodological trends in 'The Journal of Information Systems' in order to present the practical guidelines for the future IS research. By attempting to conduct a meta-analysis on both topic and survey methodological trends, this study could provide researchers wishing to pursue this line of work further with what can be done to improve IS disciplines. Design/methodology/approach In this study, we have reviewed 185 papers that were published in 'The Journal of Information Systems' from 2010 to 2018 and classified them based on topics studied and survey methodologies used. The classification guidelines, which was developed by Palvia et al.(2015), has been used to capture the topic trends. We have also employed Struab et al.(2004)s' guidelines for securing rigor of validation issues. By using two guidelines, this study could also present topic and rigor trends in 'The Journal of Information Systems' and compare them to those trends in International Journals. Findings Our findings have identified dominant research topics in 'The Journal of Information Systems'; 1) social media and social computing, 2) IS usage and adoption, 3) mobile computing, 4) electronic commerce/business, 5) security and privacy, 6) supply chain management, 7) innovation, 8) knowledge management, and 9) IS management and planning. This study also could offer researchers who pursue this line of work further practical guidelines on mandatory (convergent and discriminant validity, reliability, and statistical conclusion validity), highly recommended (common method bias testing), and optional validations (measurement invariance testing for subgroup analysis, bootstrapping methods for testing mediating effects).