• KSTLE International Journal
• /
• 제2권2호
• /
• pp.114-119
• /
• 2001

The distribution of magnetic flux density of electro-magnetic chucks may clarify the clamping characteristics, which is strongly related to the machining efficiency and machining accuracy in surface grinding machine. Therefore the distribution of the normal and the tangential components of magnetic flux density have been analyzed theoretically. It appears that the normal component of magnetic flux density increases and the tangential component of magnetic flux density increases as the ratio of the separator width to the pitch, e/p decreases. The results seem to increase the stability and uniformity of normal component of magnetic flux density for the decreased e/p.

• Computational Structural Engineering : An International Journal
• /
• 제1권2호
• /
• pp.89-96
• /
• 2001

A study on the topology optimization of a Hard-Disk-Driver(HDD) actuator arm is presented. The purpose of the present wert is to increase the natural frequency of tole first lateral mode of the HDD actuator arm under the constraint of total moment of inertia, so as to facilitate the position control of the high speed actuator arm. The first lateral mode is an important factor in the position control process. Thus the topology optimization for 2-D model of the HDD actuator arm is considered. A new objective function corresponding to multieigenvalue optimization is suggested to improve the solution of the eigenvalue optimization problem. The material density of the structure is treated as the design variable and the intermediate density is penalized. The effects of different element types and material property functions on the final topology are studied. When the problem is discretized using 8-node element of a uniform density, tole smoothly-varying density field is obtained without checker-board patterns incurred. AS a result of 7he study, an improved design of the HDD actuator arm is suggested. Dynamic characteristics of the suggested design are compared computationally with those of the old design. With the same amount of the moment of inertia, the natural frequency of the first lateral mode of the suggested design is subsequently increased over the existing one.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.57-65
• /
• 2007

Along with the development of power electronics and magnetic materials, permanent magnet (PM) brushless direct current (BLDC) motors are now widely used in many fields of modern industry BLDC motors have many advantages such as high efficiency, large peak torque, easy control of speed, and reliable working characteristics. However, Compared with the other electric motors without a PM, BLDC motors with a PM have inherent cogging torque. It is often a principle source of vibration, noise and difficulty of control in BLDC motors. Cogging torque which is produced by the interaction of the rotor magnetic flux and angular variation in the stator magnetic reluctance can be reduced by sinusoidal air-gap flux density waveform due to reduction of variation of magnetic reluctance. Therefore, this paper will present a design method of magnetizing system for reduction of cogging torque and low manufacturing cost of BLDC motor with isotropic bonded neodynium-iron-boron (Nd-Fe-B) magnets in ring type by sinusoidal air-gap flux density distribution. An analytical technique of magnetization makes use of two-dimensional finite element method (2-D FEM) and Preisach model that expresses the hysteresis phenomenon of magnetic materials in order for accurate calculation. In addition, For optimum design of magnetizing fixture, Factorial design which is one of the design of experiments (DOE) is used.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1801-1809
• /
• 2000

A study on the topology optimization of Hard-Disk-Driver(HDD) actuator arm in free vibration is presented. The purpose of this research is to increasse the natural frequency of the first lateral mode of the HDD actuator arm under the constraint of total moment of inertia, so as to facilitate the position control of high speed actuator am. The first lateral mode is an important factor in the position control process. Thus the topology optimization for 2-D model of the HDD actuator arm is considered. A new objective function corresponding to multieigenvalue optimization is suggested to improve the solution of the eigenvalue optimization problem. The material density of the structure is treated as the design variable and the intermediate density is penalized. The effects of different element types and material property functions on the final topology are studied. When the problem is discretized using 8-node element of a uniform density, the smoothly-varying density field is obtained without checker-board patterns incurred. As a result of the study an improved design of the HDD actuator arm is suggested. Dynamic characteristics of the suggested design are compared computationally with those of the old design. With the same amount of the moment of inertia, the natural frequency of the first lateral mode or the suggested design is subsequently increased over the existing one.

• 한국공간구조학회논문집
• /
• 제10권4호
• /
• pp.59-66
• /
• 2010

본 연구는 스페이스 트러스 구조물의 초기 형상을 결정하기 위해 밀도법을 이용한 위상최적화 기술을 고려하고자 한다. 대부분의 초기 형상설계는 다양한 최적화 방법을 활용하지 않고 설계자의 경험이나 시행착오적인 방법을 바탕으로 수행되고 있다. 이런 이유로 합리적이고 경제적인 최적화기술이 초기 형상설계에 도입되어야 한다. 따라서 본 연구에서는 스페이스 트러스 구조물을 대상으로 설계영역을 설정하고 위상최적화를 수행하여 최적의 재료분포를 찾은 뒤 크기최적화를 이용하여 최적부재 크기를 찾고자 한다. 이와 같이 밀도법을 이용한 위상 및 크기최적화를 병행하여 수행할 경우 합리적인 스페이스 트러스 구조물의 초기 형상을 도출할 수 있다.

• 감성과학
• /
• 제13권1호
• /
• pp.279-284
• /
• 2010

본 연구는 직물구조 디자인의 데이터 베이스에 대한 기초 연구를 수행한다. 이를 위해서 소모직물과 면직물들의 직물밀도계수가 월츠 교수와 피카놀 회사에서 제안된 커버팩터와 관련시켜 분석되고 토의된다. 또한 소모직물과 면직물의 직물밀도계수와 커버팩터와의 관계가 직물조직과 실의 번수에 따라 분석 토의된다. 끝으로 이들 천연직물들의 염색 가공공정에서의 공정수축률이 직물밀도계수와 함께 직물구조 디자인의 데이터베이스 시스템의 예비 연구로서 분석 토의된다. 그 결과는 소모직물과 면직물의 밀도계수, K 값은 600에서 1000까지 분포하였으며 이들 직물들의 직물밀도계수는 0.4에서 0.8 그리고 0.2에서 1.0의 범위에서 각각 분포하였다. 모직물의 가공축은 2%에서 10% 그리고 면직물의 가공축은 2%에서 20%까지 분포하였다. 그리고 모직물과 면직물의 직물밀도계수는 직물구조디자인에 대한 데이터 베이스의 개념으로서 직기와 직물구조 그리고 직축과 가공축에 따라서 분포됨을 보여주었다.

• 한국항해학회지
• /
• 제11권2호
• /
• pp.53-59
• /
• 1987

This paper describes the design theory of a weakly-coupled Tap-off with high density of coupling intervals for CATV and/or MATV systems, by which the degree of freedom in design and density of coupling intervals are significantly increased compared with the intrinsic one. It is also described how to construct the two-way divider (Tap-off) in the generalized type. Furthermore, the practical measurements of the frequency characteristics for a fabricated circuit show very good agreements with theoretical results.

• 국제초고층학회논문집
• /
• 제12권1호
• /
• pp.75-82
• /
• 2023

By limiting population and land resources, a high-density urban form has become the inevitable choice for central cities in the rapid growth of many large cities in China. Due to the shift in urban growth and focus, high-density urban areas require restoration and improvement. This study intends to combine ancient and new districts, establish strategies for enhancing urban function, spatial utility, industry, and transportation, and thus enhance regional holistic effectiveness, by performing in-depth research.

• Journal of information and communication convergence engineering
• /
• 제12권3호
• /
• pp.186-192
• /
• 2014

Monolithic three-dimensional integrated chips (3D ICs) are an emerging technology that offers an integration density that is some orders of magnitude higher than the conventional through-silicon-via (TSV)-based 3D ICs. This is due to a sequential integration process that enables extremely small monolithic inter-tier vias (MIVs). For a monolithic 3D memory, we first explore the static random-access memory (SRAM) design. Next, for digital logic, we explore several design styles. The first is transistor-level, which is a design style unique to monolithic 3D ICs that are enabled by the ultra-high-density of MIVs. We also explore gate-level and block-level design styles, which are available for TSV-based 3D ICs. For each of these design styles, we present techniques to obtain the graphic database system (GDS) layouts, and perform a signoff-quality performance and power analysis. We also discuss various challenges facing monolithic 3D ICs, such as achieving 50% footprint reduction over two-dimensional (2D) ICs, routing congestion, power delivery network design, and thermal issues. Finally, we present design techniques to overcome these challenges.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.912-920
• /
• 2006

The purpose of this study is to present the design standard for load density in subway station. From the data of electric equipment capacity and electric power consumption for 43 subway stations, current levels of the load density and excess capacity factor were surveyed and analyzed, In addition mean value, standard deviation, maximum value, median value and correlation coefficient were evaluated through excel program. Also it was carried out the regression analysis. The estimation method of load density and design criterion were studied. As a result, load density in this thesis have been proposed : 51.3 $[VA/m^2]$ on the general power load can be a standard value for subway station.