• 한국정보처리학회논문지
• /
• 제6권6호
• /
• pp.1520-1531
• /
• 1999

본 논문에서는, 객체 지향 설계 명세서를 대상으로, 안전성 검증 방법을 제안하였다. 먼저 검증의 대상으로 하는 폴트를 명확히 하기 위해, 요구 명세서와 설계 명세서사이에 발생 가능한 불일치를 분석한다. 다음, 설계audtptjdp 포함된 폴트를 발견하기 위한 새로운 설계 레뷰 방법을 제안한다. 제안한 검증 방법의 특징은 검증될 모든 요소가 대상 프로덕트의 요구 명세서, 안전성 기준, 그리고 설계 명세서에 기반을 두고 추출될 수 있다는 것이다. 이러한 정보가 표의 형식으로 작성되기 때문에, 검증 단계를 단순화 할 수 있다. 여기에서, 컴포넌트 라이브러리, 안전성 기준, 그리고 Booch의 설계 방법에 의해 작성된 설계 명세서가 주어졌다고 가정한다. 먼저, 설계 레뷰를 하는 검증자가 정확성 검증표와 안전성 검증표를 작성한다. 한편 설계자는 설계 검증표를 작성한다. 이렇게 작성된 3개의 검증표를 이용하여, 설계 단계에 포함되어 있는 폴트를 검출한다. 마지막으로 Case study를 통하여 제안한 검증방법의 유효성을 평가하였다.

• 산업공학
• /
• 제7권2호
• /
• pp.25-30
• /
• 1994

ISO 9000 is a series of several standards(ISO 8402, 9000, 9001, 9002, 9003, 9004,...). ISO 9000 is a standard explaining fundamental concepts, defining important terms, and providing guidance for selecting among the other standards. ISO 9001, the most comprehensive standard to ensure quality in design, development, production, installation, and servicing. ISO 9002 is used to assure conformance to specification, installation and servicing. ISO 9003 has the least requirement among three standards and applies to inspection and final testing. ISO 9004 is a standard developed for internal use only and not applicabe to contractual arrangements. In this paper, quality system requirements for ISO 9000 series are also specified.

• 한국콘텐츠학회논문지
• /
• 제5권2호
• /
• pp.213-219
• /
• 2005

소프트웨어를 개발할 때 작성되는 명세서들은 개별특성으로 인해 연속적인 자동화가 이루어지지 않으며, 소프트웨어 감리에서도 많은 불일치 항목이 발견된다. 본 논문에서는 분석 및 설계단계에서 작성되는 명세서간 일관성 유지를 위하여 감리관련자료를 분석하여 불일치 항목 분류기준을 설정한다. 이를 기초로 명세서 불일치 항목 추출 방법을 제안한다. 이를 이용하면, 분석 및 설계단계에서 작성되는 명세서의 오류를 줄임으로써 최종산출물인 소프트웨어에 대한 품질을 향상시킬 수 있다.

• 패션비즈니스
• /
• 제18권5호
• /
• pp.144-158
• /
• 2014

National Competency Standards(NCS) is to systemize the competency that is necessary for performing duties in industrial fields and to utilize synthetically duty, vocational education training, and qualification at the national level. The purpose of this study is to analyze the process of NCS development and verification, which systemizes competency units and competency unit elements through the analysis of duty in pattern field. It is to cultivate competent people to be able to promote the development of pattern industry ultimately through being a complementary to educational circles and industry then to give them practical knowledge that is demanded in the field. Furthermore, it is to be utilized as a fundamental data for reforming the system of duty competency evaluation so as to manage personnel career systematically and to improve their competency. Focus Group Interview(FGI) was adapted as the method of this study, which was proceeded 3 times, and validity of the drawn result is verified through expert questionnaire survey. Research result, which is competency units, is 10 as follows; Fit trend analysis, Analysis of sample garment Specification sheet, Pattern making for sample garment, Pattern making for manufacturing garment, Creation of sewing specification, Instruction of manufacturing technique, Sample garment Inspection for quality control, Grading, Calculation of the required material quantities, Quality control.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.29-31
• /
• 2010

This study investigated the typical standards of B kind of standard specification related to home and abroad forms design and compared them, and the results can be summarized as follows. In case of domestic standards, regulations on most forms design was described relatively in detail. and in case of CTEA among them, it included detailed contents of load conditions, lifting and subsidence. In case of abroad standards, the design regulations are only simply mentioned, not in detail, in ACI, CEB-FIP and BS, and JCI and JASS were similar to domestic KCI and KASS regulations. As to structural calculation in forms design regulations, most of domestic regulations included detailed matters on structural calculation, among them, CTEA shows the most detailed matters on it. On the other hand, it could be known that in case of abroad standards, most standards do not include matters on structural calculation except ACI, JCI and JASS.

• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.652-660
• /
• 2017

최근 총톤수 16만 톤급 이상의 대형 크루즈선이 국내 항에 정기입항하고 있다. 크루즈를 이용한 국내 관광객이 증가함에 따라 정부에서는 크루즈산업 활성화를 위해 항만기반시설 확충에 많은 노력을 하고 있다. 현재 국내 주요 항구에서 크루즈전용부두 공사가 진행되고 있다. 그러나 국내 항만 및 어항설계기준에는 크루즈선 및 접안시설에 대한 표준제원이 제시되어있지 않다. 대상선박의 표준제원이 제시되어있지 않아 전용시설물 설계 및 인허가에 많은 어려움이 예상된다. 그래서 본 연구에서는 크루즈선에 대한 표준제원을 제시하기 위하여 현재 운항중인 크루즈선의 톤수별 대표선형의 제원을 분석하고 PIANC 사례 및 국내 항설기준을 비교분석 하였다. 분석결과 크루즈선은 연안여객선과 선박제원 및 선박조종성능에 차이가 있음을 알 수 있었다. 따라서 크루즈 전용시설물 설계를 위해서는 반드시 대상선박의 제원이 국내항설기준에 반드시 포함되어야 한다. 그리고 선박의 범위를 산정하기 위하여 크루즈선 평균제원 값에 커버율(75%)을 적용하여 크루즈선 표준제원과 수역시설물에 대한 기준을 제시하였다.

• Advances in Computational Design
• /
• 제3권1호
• /
• pp.71-86
• /
• 2018

Thin-walled cross-sections can be optimized to enhance their resistance and progress their behaviour, leading to more competent and inexpensive structural system. The aim of this study is to afford a methodology that would facilitate progress of optimized cold formed steel (CFS) column section with maximum ultimate strength for practical applications. The proposed sections are designed to comply with the geometrical standards of pre-qualified column standards for CFS structures as well as with the number of industrialized and practical constraints. The stiffening evaluation process of CFS lipped channel columns, a five different cross section are considered. The experimental strength and behaviour of the proposed sections are verified by using the finite element analysis (FEA). A series comprehensive parametric study is carried out covering a wide range of section slenderness and overall slenderness ratio of the CFS column with and without intermediate web stiffeners. The ultimate strength of the sections is determined based on the Direct Strength Specification and other design equation available from the literature for CFS structures. A modified design method is proposed for the DSM specification. The results indicate that the CFS column with complex edge and intermediate web stiffeners provides an ultimate strength which is up to 78% higher than standard optimized shapes with the same amount of cross sectional area.

• 한국의류학회지
• /
• 제45권6호
• /
• pp.923-934
• /
• 2021

Most apparel products have national standards for sizing; however, for gloves, national sizing standards have not yet been established. This study aims to analyze children's hand dimensions and propose a size specification for children's gloves that shows children's hand-related size information. Among the 3D measurements of sixth Size Korea Project, the measurement data of 19 dimensions related to the hands of 1,057 boys and girls aged 7-13 years old were analyzed. The distribution and growth trend of hand measurements for boys and girls demonstrated considerable mean differences and distribution trends by gender and age as per hand dimensions, which leads to the conclusion that it is necessary to show these results in the children's glove design. Based on these results, the cross-distribution maps of children's hand length and hand circumference were drafted; furthermore, the distribution relationship with an adult hand size was identified. Based on the distribution of hand sizes, the distribution of adult hand sizes overlapped with children's hand sizes was verified, and children's glove size specifications were presented. The results can be used as useful data such as measures for setting the size range and sizing system for children's gloves.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.185-186
• /
• 2018

Leakage problems in underground spaces of domestic apartments is becoming more serious and legal disputes related to leakage problem have become more commonplace. In this regard, leakage problem is not only a problem in construction, but is also a concern from a societal aspect. In this paper, we propose the details of a below-grade waterproofing design and specification standards of specific areas and sections of residential apartment buildings, and propose that a detailed examination of positive-side waterproofing methods is required.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.28-37
• /
• 1996

Syntax notation one (ASN.1) defined by ITU-T and ISO, is a formal abstrct specification language which has been widely used in international standards specifiation to inteconnect distributed open systems. It si necessary to have well defined encoder/decoder modules which taranslate ASN.1 datum to BER octets stream to interconnect distributed open systems. In this paper, we designed and implemented a new ASN.1-to-C compiler, called HYASNC (hanyang ASN.1-to-C), which atutomatically translates and ASN.1-to-C compiler, called HYASNC (hanyang ASN.1-to-C), which automatically translates an ASN.1 specification into C-language BER encoders and decoders with simple and neat I/F for the defined ASN.1 data types, and enhanced BER (basic encoding rules)encoding/decoding libraries, called HY(hanyang)BER library, and useful utility functions. And this paper discusses HYASNC compiler, HY BER runtime library's design and implementation principles, and also evaluates the perfomrance of HY BER library and the interoperability with other ASN.1 compilers.