• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.113-122
• /
• 2010

Space frame structures are included in the large spatial structures and can adopt various structure types. But, it is not easy to choose the optimal member size and shape because it depends on the structural engineer's experience and the repeated trial and error. Therefore, in this study, the final goal is to help the designer with the selection of the optimum shape. First, various space frame structures with ellipse dome and vault complex types are chosen and the shape generation method is considered to generate the nodes, coordinates and members. In optimal design process of space frame structure, each node coordinate changes according to height variation or the number of rings. Therefore, the auto generation technique of nodes and members is required in order to consider this phenomenon in optimal design process. Next, the shape generation module is created, base on the shape generation method. This module is connected with the analysis module and the optimization algorithm. Finally, the example model is presented for the evaluation of the efficiency of optimization algorithms.

• Spatial Information Research
• /
• v.20 no.1
• /
• pp.27-38
• /
• 2012

The recent development of CFD techniques are being involved w ith Environmental Impact Assessment and Environmental DesignroThey are being applied to the Site Planning and Engineering Design works as a new trendroHowever, CFD laboratory works are not extended to the field works in Industrial Project due to inaccuracy of the data input process that is cause by absence of regional height informationsroHence, in this study, we promote to build a new initial input data processing steps and algorithms for CFD Model generation. ENVI-met model is very popular, efficient, and freely downloadable CFD model. Light Detection And Ranging (LiDAR) are well known state of art technology and dataset proving a reliable accuracy for CFD. We use LiDAR data as a input source for CFD input producing process and algorithm development and evaluation. CFD initial input data generation process and results derived from am development and set is very useful and efficient for rapid CFD input data producing and maklomore reliable CFD Model forec st for atmospheric and climatic analysis for planning and design engineering industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.611-621
• /
• 2010

When an enemy platforms transmit electronic jamming or tracking interference signal to a friendly ship's radar, the radar have to avoid the jamming and to track targets continually without losing the targets with the electronic protection techniques. Electronic protection is an essential key for a platform to survive in electronic warfare, for this purpose, jamming simulator was developed to provide electronic warfare environments for the test and evaluate the effectiveness of radar's electronic protection techniques. Jamming simulator has ability to generate a variety of deception and noise jamming signals using the DRFM which minimize phase distortions of 1GHz broadband radar signal with the phase sampling method. This paper presents the design contents of the jamming simulator to process the analysis of broadband radar signal and generate jamming signal, also proposes the algorithms of the deception and noise jamming and verifies the effectiveness of the simulator by field trial.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.2
• /
• pp.183-194
• /
• 2005

In this study, we introduce an advanced architecture of genetically optimized Hybrid Fuzzy Neural Networks (gHFNN) and develop a comprehensive design methodology supporting their construction. A series of numeric experiments is included to illustrate the performance of the networks. The construction of gHFNN exploits fundamental technologies of Computational Intelligence (CI), namely fuzzy sets, neural networks, and genetic algorithms (GAs). The architecture of the gHFNNs results from a synergistic usage of the genetic optimization-driven hybrid system generated by combining Fuzzy Neural Networks (FNN) with Polynomial Neural Networks (PNN). In this tandem, a FNN supports the formation of the premise part of the rule-based structure of the gHFNN. The consequence part of the gHFNN is designed using PNNs. We distinguish between two types of the linear fuzzy inference rule-based FNN structures showing how this taxonomy depends upon the type of a fuzzy partition of input variables. As to the consequence part of the gHFNN, the development of the PNN dwells on two general optimization mechanisms: the structural optimization is realized via GAs whereas in case of the parametric optimization we proceed with a standard least square method-based learning. To evaluate the performance of the gHFNN, the models are experimented with a representative numerical example. A comparative analysis demonstrates that the proposed gHFNN come with higher accuracy as well as superb predictive capabilities when comparing with other neurofuzzy models.

• Journal of the Korean Geographical Society
• /
• v.41 no.2 s.113
• /
• pp.188-194
• /
• 2006

Three-dimensional topological data is essential for 3D modeling and application such as emergency management and 3D network analysis. This paper reviewed current 3D topological data model and developed a method to construct 3D topological node-relation data structure from 2D computer aided design (CAD) data. The method needed two steps with medial axis-transformation and topological node-relation algorithms. Using a medial-axis transformation algorithm, the first step is to extract skeleton from wall data that was drawn polygon or double line in a CAD data. The second step is to build a topological node-relation structure by converting rooms to nodes and the relations between rooms to links. So, links represent adjacency and connectivity between nodes (rooms). As a result, with the conversion method 3D topological data for micro-level sub-unit of each building can be easily constructed from CAD data that are commonly used to design a building as a blueprint.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.29-41
• /
• 2007

Structural design, like other complex decision problems, involves many trade-offs among competing criteria. Although mathematical programming models are becoming increasingly realistic, they often have design limitations, that is, there are often relevant issues that cannot be easily captured. From the understanding of these limitations, a decision-support system is developed that can generate some useful alternatives as well as a single optimum value in the optimization of steel frame structures. The alternatives produced using this system are "good" with respect to modeled objectives, and yet are "different," and are often better, with respect to interesting objectives not present in the model. In this study, we created a decision-support system for designing the most cost-effective moment-resisting steel frame structures for resisting lateral loads without compromising overall stability. The proposed approach considers the cost of steel products and the cost of connections within the design process. This system makes use of an optimization formulation, which was modified to generate alternatives of optimum value, which is the result of the trade-off between the number of moment connections and total cost. This trade-off was achieved by reducing the number of moment connections and rearranging them, using the combination of analysis based on the LRFD code and optimization scheme based on genetic algorithms. To evaluate the usefulness of this system, the alternatives were examined with respect to various design aspects.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.239-242
• /
• 2016

In recent years, Unmanned Aerial Vehicles (UAV) have been developed for both military and civilian activities in regions where the presence of onboard human pilots is risky or not necessary. However, UAV require a high demand of power to achieve its missions such as taking images/videos in a certain area or surveillance activities. Therefore, this situation triggers the need of techniques to reduce power consumption for UAV to complete its mission safely. One of the methods is to use a waypoint optimization procedure which deals with a pre-specified set of waypoints to find a minimum route to fly through those waypoints in order to reduce power consumption. In this paper, due to the UAV's multidisciplinary which makes it impossible to be represented as an analytical model, we design a simulation model of UAV using MATLAB Simulink and AeroSim Blockset, an analysis package in aerospace industry. The simulation model is then coupled with optimization algorithms along with a set of waypoints (flight path) in order to measure at which percentage power consumption can be minimized for UAV.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.580-586
• /
• 2021

The CAT methodology is a numerical analysis technique using CAE. Recently, a methodology of applying artificial intelligence techniques to a simulation has been studied. A previous study compared the deformation results according to the injection molding process using a machine learning technique. Although MLP has excellent prediction performance, it lacks an explanation of the decision process and is like a black box. In this study, data was generated using Autodesk Moldflow 2018, an injection molding analysis software. Several Machine Learning Algorithms models were developed using RapidMiner version 9.5, a machine learning platform software, and the root mean square error was compared. The decision-tree showed better prediction performance than other machine learning techniques with the RMSE values. The classification criterion can be increased according to the Maximal Depth that determines the size of the Decision-tree, but the complexity also increases. The simulation showed that by selecting an intermediate value that satisfies the constraint based on the changed position, there was 7.7% improvement compared to the previous simulation.

• Steel and Composite Structures
• /
• v.44 no.2
• /
• pp.155-169
• /
• 2022

In the present paper an analytical model was developed to study the non-linear vibrations of Functionally Graded Carbon Nanotube (FG-CNT) reinforced doubly-curved shallow shells using the Multiple Scales Method (MSM). The nonlinear partial differential equations of motion are based on the FGM shallow shell hypothesis, the non-linear geometric Von-Karman relationships, and the Galerkin method to reduce the partial differential equations associated with simply supported boundary conditions. The novelty of the present model is the simultaneous prediction of the natural frequencies and their mode shapes versus different curvatures (cylindrical, spherical, conical, and plate) and the different types of FG-CNTs. In addition to combining the vibration analysis with optimization algorithms based on the genetic algorithm, a design optimization methode was developed to maximize the natural frequencies. By considering the expression of the non-dimensional frequency as an objective optimization function, a genetic algorithm program was developed by valuing the mechanical properties, the geometric properties and the FG-CNT configuration of shallow double curvature shells. The results obtained show that the curvature, the volume fraction and the types of NTC distribution have considerable effects on the variation of the Dimensionless Fundamental Linear Frequency (DFLF). The frequency response of the shallow shells of the FG-CNTRC showed two types of nonlinear hardening and softening which are strongly influenced by the change in the fundamental vibration mode. In GA optimization, the mechanical properties and geometric properties in the transverse direction, the volume fraction, and types of distribution of CNTs have a considerable effect on the fundamental frequencies of shallow double-curvature shells. Where the difference between optimized and not optimized DFLF can reach 13.26%.

• Journal of Distribution Science
• /
• v.16 no.12
• /
• pp.95-104
• /
• 2018

Purpose - In order to gain the upper hand in competition between container terminals, efforts to improve container terminal productivity continue. Export containers arrive randomly in the container terminal and are carried in the container terminal yard according to the arrival order. On the other hand, containers are carried out of the container terminal yard in order based on container weight, not in order of arrival. Because the carry-in order and the carry-out order are different, rehandling may occur, which reduces the performance of the container terminals. In order to reduce rehandling number, containers can be moved in advance when they arrive, which is called preprocessing. This paper proposes an effective preprocessing algorithm and analyzes the factors that affect the productivity of the container terminals. It also provides a way to choose the best factors for preprocessing for a variety of situations. Research design, data, and methodology - To analyze the impact of factors affecting the performance of preprocessing algorithms presented in this paper, simulations are performed. The simulations are performed for two types of bays, 12 stacks with 8 tiers, and 8 stacks with 6 tiers. Results - The results of the factor analysis that affects the performance of the preprocessing algorithm were as follows. (1) As the LMF increased, preprocessing number increases and rehandling number decreased. (2) The LML effect was greatest when the LML changed from 0 to 1, and that the effect decreased when it changed above 1. (3) The sum of preprocessing number and rehandling number was then shown to be increased after decrease, as the LMF increased. (4) In the case of NCI, a decrease in NCI showed that the containers would become more grouped and thus the performance was improved. (5) There was a positive effect in the case of EFS. Conclusion - In this paper, preprocessing algorithm was proposed and it was possible to choose the best factors for preprocessing for a variety of situations through simulations. Further research related to this study needs to be carried out in the following topic : a study on the improvement of container performance by connecting the preprocessing with remarshalling.