• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.522-527
• /
• 2015

Decision of available soil depth based on soil physical and hydraulic properties for the $3^{rd}$ Landscape Vegetation Project in the Incheon International Airport was attempted. The soil samples were collected from the 8 sites at different depths, 0-20 and 20-60cm, for the three project fields, A, B, and C area. Physical and chemical properties including particle size distribution, organic matter content and electrical conductivity were analyzed. Hydrological properties including bulk density and water holding capacity at different water potential, -6 kPa, -10 kPa, -33 kPa, and -1500 kPa were calculated by SPAW model of Saxton and Rawls (2006), and air entry value was calculated by Campbell model (1985). Based on physical and hydrological limitation, feasibility and design criteria of soil depth for vegetation and landfill were recommended. Since the soil salinity of the soil in area A area was $19.18dS\;m^{-1}$ in top soil and $22.27dS\;m^{-1}$ in deep soil, respectively, landscape vegetation without amendment would not be possible on this area. Available soil depth required for vegetation was 2.51 m that would secure root zone water holding capacity, capillary fringe, and porosity. Available soil depth required for landscape vegetation of the B area soil was 1.51 m including capillary fringe 0.14 m and available depth for 10% porosity 1.35 m. The soils in this area were feasible for landscape vegetation. The soil in area C was feasible for bottom fill purpose only due to low water holding capacity.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.131-136
• /
• 1997

We present a method to estimate a dense and sharp depth map using multiple cameras for the application to flexible video production. A key issue for obtaining sharp depth map is how to overcome the harmful influence of occlusion. Thus, we first propose to selectively use the depth information from multiple cameras. With a simple sort and discard technique, we resolve the occlusion problem considerably at a slight sacrifice of noise tolerance. However, boundary overreach of more textured area to less textured area at object boundaries still remains to be solved. We observed that the amount of boundary overreach is less than half the size of the matching window and, unlike usual stereo matching, the boundary overreach with the proposed occlusion-overcoming method shows very abrupt transition. Based on these observations, we propose a hierarchical estimation scheme that attempts to reduce boundary overreach such that edges of the depth map coincide with object boundaries on the one hand, and to reduce noisy estimates due to insufficient size of matching window on the other hand. We show the hierarchical method can produce a sharp depth map for a variety of images.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.83-94
• /
• 2018

In many theoretical and empirical studies on the design issues of therapeutic healthcare facilities, spatial configuration that promotes users' wayfinding behavior, has been emphasized as a significant factor to mitigate stressful experiences and to enhance restorative quality in the healthcare environment. This is also applicable to the healthcare setting for children. However, not much evidence has been reported with regard to the relationship between spatial configuration and wayfinding behaviors in this specific setting. Moreover, healthcare facilities for children with physical disabilities need more attention to provide easy wayfinding due to various physical restrictions. The aim of this study is therefore, to unfold the relationship between spatial configuration and visual cognitive qualities of outpatient spaces in the selected children's rehabilitation hospitals in Seoul, by examining visual cognitive attributes such as visibility, accessibility, and intelligibility. In the first phase, the spatial layout of the hospitals was analyzed, with an emphasis on the major outpatient areas such as the entrance lobby, doctors' examination, and physical therapy zones. In the second phase, a space syntax tool was implemented to examine visual cognitive characteristics of the spatial configuration. The spatial configuration parameters measured were integration, integration core, visual isovist field continuity, correlation between integration and step depth, and the correlation between integration n and integration 3. As a result, the integration was higher in the hall type configuration. Circulation intersections acted mostly as integration cores for better visibility. Some areas showed the lack of continuity in the visual isovist fields overlap and irregular correlation between integration and step depth. The intelligibility was higher in the circulation area and social interaction spaces such as a cafe, reception waiting, and therapy waiting areas. Based on the analysis, design implication and possible future improvement were discussed to enhance wayfinding experiences in the hospitals for children with physical disabilities.

• Journal of Korea Multimedia Society
• /
• v.19 no.9
• /
• pp.1659-1668
• /
• 2016

Understanding 3D structure of scenes is of a great interest in various vision-related tasks. In this paper, we present a unified approach for estimating depth from a single monocular image. The key idea of our approach is to take advantages both of parametric learning and non-parametric sampling method. Using a parametric convolutional network, our approach learns the relation of various monocular cues, which make a coarse global prediction. We also leverage the local prediction to refine the global prediction. It is practically estimated in a non-parametric framework. The integration of local and global predictions is accomplished by concatenating the feature maps of the global prediction with those from local ones. Experimental results demonstrate that the proposed method outperforms state-of-the-art methods both qualitatively and quantitatively.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.55-62
• /
• 2010

Human visual attention system has a remarkable ability to interpret complex scenes with the ease and simplicity by selecting or focusing on a small region of visual field without scanning the whole images. In this paper, a novel feature map generation and integration method for attention based visual information processing system is proposed. The depth information obtained from a stereo pair of images is exploited as one of spatial visual features to form a set of topographic feature maps in our approach. Comparative experiments show that correct detection rate of visual attention regions improves by utilizing depth feature compared to the case of not using depth feature.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.111-118
• /
• 2006

A hybrid focus method with multiple laser slits is newly proposed for the measurement of surface morphology with depth discontinuity, and it is based on the integration of DFB and DFF. Rough depth information is estimated through calibration tables which are constructed by DFD with multiple laser slits, and then DFF is applied to only each specific depth range using the rough depth information resulting from DFD. The proposed hybrid method gives more accurate results than DFD and DFF, and faster measurement than DFF in the vicinity of depth discontinuity Its performance is verified through experiments of calibration blocks with sharp depth discontinuity.

• Journal of Family Resource Management and Policy Review
• /
• v.23 no.4
• /
• pp.1-21
• /
• 2019

The purpose of this study was to explore employees' experiences of integrated services in Healthy Family and Multicultural Family Support Centers in Seoul. In-depth interviews were conducted with seven employees, including managers and heads of Healthy Family and Multicultural Family Support Centers. The interviews identified three themes: the direction of integrated service, the characteristics of the integration process, and the challenges of integrated service. For the direction of integrated service, the participants identified the integration center as a professional family services organization that provided customized services for different types of families. During the integration process, employees found it difficult to provide integrated services because few guidelines existed on operating an integration center that provided services to families with different characteristics and needs. However, they also explained positive aspects of integration, such as strengthening the business's capacity by expanding the organization. To improve integrated service, employees emphasized the expertise and appropriateness of the family services over the efficiency of the integration centers. They also stressed expansion as a role of a professional family services organization. These findings suggested that establishing a clear direction for integrated service as well as the roles of administrative support agencies is important for activating integrated services.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.706-709
• /
• 2005

A hybrid focus method with multiple laser slits has been newly proposed and it is based on the integration of DFD and DFF Rough depth information is estimated using DFD equipped with multiple laser slits, and then DFF is applied to only each specific depth range using the depth information resulting from DFD. The proposed hybrid method gives more accurate results than DFD and DFF, and faster measurement than DFF. Its performance has been verified through experiments of calibration blocks with sharp depth discontinuity.

• Journal of Biomedical Engineering Research
• /
• v.31 no.5
• /
• pp.407-411
• /
• 2010

During the cardiopulmonary resuscitation (CPR), the correct chest compression depth and period are very important to increase the resuscitation possibility. For the feedback of chest compression depth, the depth monitoring device based on the accelerometer is developed and widely used. But this method tends to overestimate the compression depth on the bed. To overcome this limitation, the chest compression depth estimation method using two accelerometers is suggested With the additional accelerometer between the patient and mattress on the bed, the compression of the mattress is also measured and it is used to compensate the overestimation error. The experimental results show that the single accelerometer estimates as 61.4mm for the actual compression depth of 43.6mm on the mattress. The depth estimation with the dual accelerometer was 44.6mm which is close to the actual depth. With the automatic zeroing in every single compression, the integration error for the depth can be reduced. The dual accelerometer method is effective to increase the accuracy of the chest compression depth estimation.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.2
• /
• pp.21-28
• /
• 2008

The main purpose of this paper is to find the phase-in of BIM adoption by focusing on the level of integration. BlM should be aimed at integration and collaboration of all parties furnishing design and construction services to increase the productivity. Therefore, the degree and depth of integration for project collaboration is very important to BlM design process. One of the key advantages of full integration is that is to facilitates the development of detailed information much earlier in the entire design process to improve collaboration among stakeholders. Such integrated use is the ultimate method, but even so, it's not the precondition of BlM. One of the key advantages of relatively low integration as a transition phase is to adopt the BlM earlier than full integration. Such transitional and non-integrated BIM can also reduce the possibility of trial and error in BlM adoption. Therefore, this paper focused on non-integrated use of BlM as a substitute of full IPD by analyzing obstacles in BIM adoption.