• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.1-11
• /
• 2009

Statement of problem: There are two methods of color choice for the esthetic restoration. One is visual shade matching which draws a comparison between shade guide and teeth in dentist's own eye and the other is using a digital shade analysis system recently introduced. Although the visual shade matching has a lot of problems, decision of color by this visual shade matching and the ways of expression for the decided color are still applicable to clinical dentistry. Purpose: This study is designed to investigate shade guides used in the dental clinics and laboratories have the same value using ShadeEye-$NCC^{(R)}$ dental chroma meter (Shofu Inc., Kyoto, Japan) using shade guide are evaluated. Material and methods: At the first experiment, eight Vita Lumin Vacuum shade guides (Vident Inc., California, USA) were collected from the dental clinics. A1 and B1 shade tabs are chosen and the colors are analyzed five times each in both tooth and porcelain modes by digital shade analysis system, ShadeEye-$NCC^{(R)}$. In the second experiment, twelve Vita shade guides using practically in the dental clinics and laboratories were collected and also A1 and B1 shade tabs are chosen and the colors of A1 and B1 are analyzed one time each in both tooth and porcelain modes by ShadeEye-$NCC^{(R)}$. Results and conclusion: There were significant differences among eight shade guides in terms of shade (chroma), value and hue in both of A1 and B1 (P<.05). Shade guides using in present both dental clinics and laboratories did not show significant differences, except A1 in the porcelain mode, it showed significant differences (P<.05) in the shade even though the shade tab has the same name.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.323-330
• /
• 2012

The purpose of this study was to examine the occurrence level of harmful chemical substance and the riskiness caused by it at university laboratory, which had been faintly interested in safe health management. It measured and analyzed indoor pollutants by academic department targeting K university where is located in Seoul Metropolis for 6 days starting from May 26, 2010. As a result, the appearance of being furnished with MSDS, the appearance of installing the exposure-reduction facilities, and the present status of supplying protective equipment in order to grasp the present status of managing harmful chemical substance at university laboratory were relatively good in management at the Dept. of Chemistry, the Dept. of Physics, and the Dept. of Medical Science, which are basic science laboratories. The activity for managing harmful chemical substance in the Dept. of Dental Medicine and the Dept. of Fine Arts was surveyed to be insufficient. Also, the concentration of formaldehyde and TVOCs(total volatile organic compounds) inside laboratory was detected noticeably highly in the Dept. of Fine Arts compared to other laboratories. The concentration of formaldehyde in a group, which was collectivized by similar academic department, was indicated to be higher in other academic departments including the Dept. of Fine Arts and the Dept. of Life Science, thereby having shown significant difference. The concentration of formaldehyde and TVOCs showed significant difference at the laboratory without installation compared to the laboratory with installation of fume hood. Seeing the above results, it could be known that a whole drop in recognition on influence of chemical upon health leads to being able to increase occurrence level of hazardous factor due to being insufficient in activity of protecting exposure to chemical substance.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.131-144
• /
• 2015

Purpose: This study set out to propose plans for more efficient and effective clinical practice by investigating the current state of clinical practice in the field of dental technology and thus provide basic data to develop pre- and post-education programs for clinical practice. Methods: The subjects include dental technicians at dental technical laboratories that were appointed as the place of clinical practice by the Department of Dental Technology of G University. The survey period spanned from December 22, 2014 to January 20, 2015. Total 250 questionnaires were distributed to them, and 190(76.0%) were returned. After excluding 23 whose answers were uncertain or seemed to lack reliability, total 167(66.8%) were used in final analysis. Results: 1. The most frequent practice the student did during clinical practice was articulator attachment, which was followed by pin operation or model making, one's own task and practice, sand and crow sculpturing, burying, casting, and grinding. 2. In case of going through the entire process, porcelain had the most students at 39(23.4%), being followed by crown & bridge at 28(16.8%), clinical model at 23(13.8%), full denture at 17(10.2%), and partial denture at 17(10.2%) in the order. 3. Of the students, 59.8%(30.5% for reinforced basic practice; 29.3% for intensive practice education) said that intensive practice education should be reinforced in school; and 22.3% said that intensive theory and practice education was needed, which indicates that 82.6% voiced their opinion of reinforcing education around practice. 4. The students felt that they lacked diligence, passion, and theoretical knowledge somewhat and were relatively good at clinical adaptation and operational skills. Conclusion: The findings show that the students felt an absolute lack of practice education as the school education was focused on theory and national exams in the field of dental technology, thus raising a need to reinforce practice education. Of all the respondents, 62.9% said there was a need to improve the current education with a focus on jobs. In future, education of dental technology should work to bring up able dental technicians that can perform in clinical dental technology right after graduation by reinforcing job-based practice education.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.35-45
• /
• 1989

This study was carried out from June, 20, to October 22, 1988, for the purpose of researching on the complaint ratio of Respiratory symptoms of the dental laboratory technicians in Seoul. In this study, aiming to find out complaint ratio of respiratory symptoms of the dental laboratory, SNU-81-AL were applied, at random, to 193 dental laboratory technicians at 39 dental laboratories, as the research group, and to 178 clinical laboratory technicians at 10 general hospitals, as the control group, and above two groups were compared with each other. The following results were obtained from this research. 1. The quantity of respirable dust under 5$\mu$m measured at the dental laborartories was, on an average as well, 5$mg/m^3$-minimum 1.56$mg/m^3$), and the density of CO was, on an average as well, 5.0ppm(Mx 7.0-Mn 3.0). 2. The complaint ratio of five main respiratory symptoms(cough, phlegm, wheezing, nasal catarrh & cold, breathlessness) was, on an average, 44.3% at the dental laboratory technicians, phlegm was the major symptom complained by the greatest number of the technicians. 22.4% of the clinical laboratory technicians complained above 5 main respiratory symptoms, nassal catarrh & cold was the mostly complained symptoms among them. There showed a consideraly significant difference at the complaint ratio between the above 2 occupations(P<0.005). 3. There showed no paticular significant difference between male and female, at the complaint ratio of the dental laboratory technicians. However, there showed a considerable significant difference according to their sexuality, in case of the clinical laboratory technicians. 4. Considered from th view point of age, the highest age group was 20-29 with its average 48.5%, in case of dental laboratory technicians. The highest age group among the clinical laboratory technicians was over 40 age with its 28.7%. There showed no particular significant differences between to tow occupations. 5. Considered from the view point of work period, the highest work period group was 0-3 years with average 47.8%, in case of dental laboratory The highest work period group among the clinical laboratory technicians was 16 years with its 25.2%. There showed no particuar significant differences between the two occupations. 6. Considered from the view point of smoking, phlegm was complained by much more smokers than non-smokers, in both occupations. In case of non-smokers, many complained about nassal catarrh & cold. There showed no particular significant differences between the smokers and the non-smokers.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.849-863
• /
• 2009

Objectives : This study was to study dental hygiene department students' management of infection and their attitude toward infection. Methods : This study was conducted from August 24, 2009 to September 20, 2009. 269 sophomore and junior college students enrolled in the department of dental hygiene from schools located in Gyeonggi-do and Gangwon-do participated in the study. A self-administered questionnaire survey was conducted. Results : 1. As for dental hygiene department students' recognition of the causes of infectious diseases, 80.7% of the respondents said hepatitis B was the infectious disease highly likely to occur in laboratories. 35.3% was correct about the antecedent variables of infection in the workshop, 24.9% about the oral symptoms of HIV and 18.6% about the diseases induced by HBV. The recognition rates were generally low. 2. About whether the respondents ask patients questions about infectious diseases, 80.7% of them answered Yes, but only 56.2% of them said they do so every time, and 17.8% of them said they never do so. 3. As far as washing hands to prevent infectious diseases is concerned, 97.4% of the respondents said hand washing helps prevent infection. 72.5% of them said they wash their hands every time before they practice on a patient, while 84.0% of them said they washed their hands after the lab practice. 90.7% said they use liquid soap containing anti-microbial agents, and 81.8% of them said they use paper towels. 4. With regard to protective gear for prevention of infectious diseases, 98.9% of the respondents said it is desirable to use disposable protective gear for each patient. When it comes to what they actually used as protective gear, 91.1% said aprons, 89.2% gloves, and 87.7% masks. However, a low percentage of the respondents actually use goggles and replace masks when they got damp, 11.2% and 24.2% respectively. Conclusions : As for treating the surface of equipments to prevent infectious diseases, most of the respondents exhibited a high recognition rate. Relative fewer respondents actually treat the surface of equipments than those respondents who are aware of the need to do so. A high percentage of the respondents also said they use alcohol sponge to treat the surface of each equipment in order to prevent infectious diseases.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.203-210
• /
• 2020

By facing the era of the 4th industrial revolution, personalized medical services for patients are expanding with the development of information and communications technology. With these changes, digital medical devices have begun to be used to support diagnosis, patient monitoring, and decision-making of diseases, and recently software medical devices for the purpose of preventing, managing, or treating disorders or diseases have become popular. The aim of this article is to understand the current concept and status of Software as a Medical Device (SaMD), which are actively being carried out in the United States, and to find out what fields can be applied in the future. In addition, it intends to find out the Korean domestic policy trends related to smart healthcare and find out the application of digital software as a medical devices that can be used in dental clinic to keep pace with the upcoming changes in the medical field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3625-3634
• /
• 2014

This study was conducted to provide the basic data for the prevention and management of health risk of dental technicians by proposing the necessary data in the management of the health related quality of life of dental technicians. The subjects of the survey were 141 dental technicians working in 30 dental technical laboratories and corresponding companies in Daejeon area. A structured self-entry type questionnaire survey was implemented by measuring the work environment from December 20, 2011 to January 31, 2012 at the same time. The total score of health index showed a significant difference according to the working hours and smoking state as the a factor of the individual level, the physical health index showed a significant difference according to the smoking state and the exercise habits as the factor of the individual level. The mental health index showed a significant difference according to the working hours and smoking state as the factor of the individual level. The significant variable did not appear in the predictor of the group level. In conclusion, the quality of life of dental technicians in relation to health appeared to have a larger effect on the factor of the individual level than the factor of the group level.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.71-81
• /
• 1989

This study was aimed for bettering productivity and technical level of the dental 1 aboratory, and helping the dental technician's benefits and rights, and then endowing them some belonged atmospher and stability on their post by Improving job- satisfaction and maintaining the transferability of one's post at a proper limitation. Therefore, 320 dental technicians extracted randomly from all the technicians working at 494 dental laboratories were subjected for this study. The approach to the study was a way through some postal questionaires executed from March 29, 1988 until May 4, the same year, in which total 254 technicians answered, showing 79% resp"nserate. responserate. The data-analysis was done by a model of the dental technician's transferability from their post, as considering Mobley's(1978)-model of post-transferability, and results through the study are as follows : 1. Satisfaction at a given post showed that the married is better than the unmarried(<0.05), and the experienced is better than the inexperienced(P<0.01). 2. Age, sex, educational experience, and one's service-duration did not affect significantly to the respondent's satisfaction on their post, statistically. 3. Satisfaction at a given post differed in adccordance with given conditions of one's post, i. e.,it stowed high when the monthly payment was good(P<0.05), and when too much duty on their job was given, it was the worst as shown in an example of the next order, too much

• The Journal of Korean Society for School & Community Health Education
• /
• v.9 no.2
• /
• pp.15-31
• /
• 2008

Objective: This study is a quasi-experimental study by nonequivalent control group pretest-posttest design, performed in order to identify whether the program developed on the basis of Ajzen(1988, 1991)'s theory of planned behavior (TPB) for predicting the safety behavior of students of department of dental technology affects intention toward safety behavior and general behavior. Therefore, the purpose of this study is to identify whether the safety education in laboratories in which knowledge is reinforced on the basis of the TPB theory affects safety behavior. Methodology: The theoretical framework of this study was established on the basis of the TPB by Ajzen(1988, 1991). This study was performed between May 20 and December 5, 2006, and the subjects included 101 in the experimental group and 98 in the control group, a total of 199. The experimental group was educated through six 50-minute sessions (twice a week) for three weeks. The experimental group was pretested, educated, and then asked to answer the pro-questionnaire after finishing the sixth session, but the control group was free from intervention. The research tool in this study was developed by the authors with reference to the process of tool development used in Schifter and Ajzen (1985) based on Ajzen and Fishbein(1980)'s tool development guide. Results: The data were analyzed through SPSS 14.0 version. The reliability test of attitude, subjective norm, perceived norm, intention, and behavior toward safety behavior as TPB variables was calculated of Cronbach's alpha coefficient, and general characteristics and the homogeneity test of the experimental and the control groups were analyzed through t test and $X^2$ test. According to the results of the analysis, the experiment group may be higher than the control group after the safety education in the scores of attitude, the subjective norm, the perceived norm, and the intention toward safety behavior as TPB independent variables showed no significant difference, but there was significant difference in the behavior and the knowledge. Meanwhile, according to the results of the pretest and posttest, eleven items in the experimental group and two items in the control group showed significant difference in the behaviors, and twelve in the former and four in the latter were significantly different in the knowledge. Conclusion: The safety education program developed on the basis of TPB was identified to enhance safety behavior and knowledge. Therefore, the safety education program used in this study for students of department of dental technology may be utilized as database for safety education in the department of dental technology.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4576-4582
• /
• 2023

The Korea retrospective dosimetry (KREDOS)-electron paramagnetic resonance (EPR) group undertook an intercomparison investigation utilizing hydroxyapatite. This analysis involved four institutions: the Korea Institute of Radiological and Medical Sciences, Dongnam Institute of Radiological and Medical Sciences, Korean Association for Radiation Application, and Radiation Health Institute of Korea Hydro & Nuclear Power. Following the irradiation of the hydroxyapatite sample, the recorded build-up was analyzed. To validate the reliability of the EPR dosimetry findings and enhance its operational performance, a hydroxyapatite dose-response curve was plotted and dosimetry was performed for a blind sample. The proficiency of each laboratory was assessed by employing an interlaboratory comparison methodology. This involved a comparative analysis of the measurement results by calculating the relative bias, z-score, and En value. The results submitted by the participating laboratories demonstrated satisfactory ratings for doses of 1.006, 3.999, and 6.993 Gy. Following the second intercomparison, efforts to optimize their hydroxyapatite-EPR dosimetry systems are underway in the participating laboratories. The current assessment of hydroxyapatite dose yielded the foundational data required to establish the parameters of dental dosimetry. In future, the third intercomparison experiment will be conducted for exploring other materials.