• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.15.1-15.5
• /
• 2019

Background: Actinic cheilitis (AC) is a variant of actinic keratosis which is known to be a premalignant condition that could develop into squamous cell carcinoma (SCC). Epimyoepithelial carcinoma (EC) is a very rare salivary gland (SG) neoplasm that has classical biphasic histologic findings of small tubules and glandular lumina surrounded by clear myoepithelial cells. Case presentation: We report a very rare case of AC occurring on the lower lip of a 70-year-old woman, which is developing to the EC later. Conclusions: Diverse appearances of AC include edematous reddish in the acute stage and grey-whitish or dried hyperkeratotic wrinkled lesions in the chronic stage for several months or even years. Accurate treatment of AC in its initial stage could be recommended to avoid further malignant transformation; proper management of clinically suspicious AC is suggested.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.139-144
• /
• 2004

In the present study, a simple method was successfully used for hydroxyapatite coatings on Ti-6Al-4V substrates deposited by using a sol-gel derived precursor. Prior to hydroxyapatite coating the samples were micropolished (0.1 micron) and divided into three sets. The first set,were the micropolished samples kept as such. The second set were coated with titania sol and the third set was treated with 5M NaOH. After three repetitions of hydroxyapatite coating procedures on each set and heat treatment at 600 $^{\circ}\Delta C$, the formation of hydroxyapatite has been confirmed by XRD analyses and the substrate material was found to be oxidized with negligible amount of CaO in the coating. The SEM studies revealed surface morphology. Hydroxyapatite, calcined at 600$^{\circ}\Delta C$, displaying a porous structure arisen from heating of the bulk. But, it is very meaningful in trying to approach morale management plans with an object of dental technicians. It is necessary that dental technicians should make efforts to control themselves.

• Journal of Technologic Dentistry
• /
• v.33 no.4
• /
• pp.495-503
• /
• 2011

Purpose: The purpose of this study was to obtain data that can be utilized in the planning of oral health education plan, by surveying the correlation between oral health knowledge, attitude, and behavior among high grade students elementary school in some regions of the metropolitan. Methods: The subject of this study through the survey of the recognition of the oral health, a questionnaire survey was conducted for 548 male and female students who were in the 4th, 5th, 6th grade of elementary school in some regions of the metropolitan. Statistical analysis was conducted using the SPSS 12.0 with t-test, ANOVA, and correlation. Results: Knowledge of oral health was very high. Correct attitudes and positive behavior were indicated. There was a significant difference in oral health knowledge according to school year and parents' dental condition(P<.05). The student one recording oral health behavior degree where the oral health knowledge is high appears highly, considers statistically the difference which it was visible. Positive correlation was significantly observed among oral health knowledge, attitudes, and behavior. Especially, attitudes and toothbrush method were highly correlated(r=.853). Conclusion: Oral health program through the elementary school students and their parents for the development of proper oral health care education programs continue to be made should be considered.

• Journal of Technologic Dentistry
• /
• v.35 no.3
• /
• pp.221-229
• /
• 2013

Purpose: The purpose of this study was to investigate the image and the awareness of dental laboratory technicians in health allied college students. Methods: The subject of this research are 431 health-related major students who are selected by convenience sampling from Seoul, Gyeonggi-do, Chungcheong-do, Jeolla-do and Gyeongsang-do. After a survey was conducted, the answer sheets from 401 respondents were analyzed except for 30 incomplete ones. The collected data is statistically analyzed by SPSS(Statistical Packages for Social Science 12.0. SPSS Inc., Chicago, IL, USA). Results: The findings of the study were as follows: As a result of general awareness about dental laboratory technicians, the health allied college students knew 83.0% about dental laboratory technician as a job. Respondents showed high recognition about dental laboratory technician as a job($3.62{\pm}0.31$), which showed that the health allied college students took a favorable view of dental laboratory in general. There were significant difference in dental laboratory technician image with age, gender(P<.05). Conclusion: It is required to develop programs such as proactive public relations or campaign via mass media that could enhance the public recognition about dental laboratory technician up to one of professional as required. It is also necessary that dental laboratory technicians make steady efforts for self-development to enhance their own job philosophy and skills in the level of quality, while they need various educations for building up their own favorable personality and positive ideas.

• Journal of dental hygiene science
• /
• v.13 no.1
• /
• pp.36-44
• /
• 2013

The purpose of this study was to provide basic data for healthy and effective dental management by providing the knowledge and information on periodontal health promotion as well as high dental health interests, by doing a comparative analysis of the effect of dental health knowledge and oral hygiene management skills of people in their 20s on periodontal health status assessment, to find periodontal disease early and prevent it targeting 130 adults in their 20s who visited dental hygienic lab for comprehensive dental hygiene care and treatment from September 25 to October 30. The data collected used SPSS 18.0. To present the technical characteristics of the data, frequency was used and chi-squared test through cross-analysis was conducted to investigate dental health knowledge and the relevance between the variables of oral hygiene management skills of general characteristics. To examine periodontal health status assessment, t-test and One-way ANOVA and Turkey post-hoc tests were carried out at the 5% significance level. Regression analysis was performed to investigate the impact of dental health knowledge and oral hygiene management skills on dental health status assessment. As a result of this study, as dental health knowledge on tooth brushing of people in their 20s increased, plaque index reduced, as dental health knowledge on periodontal disease increased, plaque index reduced. Dental health status assessment according to a total number of times tooth brushing, tooth brushing methods, whether to use dental hygiene devices, smoking status, drinking frequency per week, whether to have oral health education was statistically significant. To improve the level of dental health knowledge and oral hygiene management skills, oral health education should be strengthened as well as the publicity through the media to have the information on oral health and learn it.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.849-863
• /
• 2009

Objectives : This study was to study dental hygiene department students' management of infection and their attitude toward infection. Methods : This study was conducted from August 24, 2009 to September 20, 2009. 269 sophomore and junior college students enrolled in the department of dental hygiene from schools located in Gyeonggi-do and Gangwon-do participated in the study. A self-administered questionnaire survey was conducted. Results : 1. As for dental hygiene department students' recognition of the causes of infectious diseases, 80.7% of the respondents said hepatitis B was the infectious disease highly likely to occur in laboratories. 35.3% was correct about the antecedent variables of infection in the workshop, 24.9% about the oral symptoms of HIV and 18.6% about the diseases induced by HBV. The recognition rates were generally low. 2. About whether the respondents ask patients questions about infectious diseases, 80.7% of them answered Yes, but only 56.2% of them said they do so every time, and 17.8% of them said they never do so. 3. As far as washing hands to prevent infectious diseases is concerned, 97.4% of the respondents said hand washing helps prevent infection. 72.5% of them said they wash their hands every time before they practice on a patient, while 84.0% of them said they washed their hands after the lab practice. 90.7% said they use liquid soap containing anti-microbial agents, and 81.8% of them said they use paper towels. 4. With regard to protective gear for prevention of infectious diseases, 98.9% of the respondents said it is desirable to use disposable protective gear for each patient. When it comes to what they actually used as protective gear, 91.1% said aprons, 89.2% gloves, and 87.7% masks. However, a low percentage of the respondents actually use goggles and replace masks when they got damp, 11.2% and 24.2% respectively. Conclusions : As for treating the surface of equipments to prevent infectious diseases, most of the respondents exhibited a high recognition rate. Relative fewer respondents actually treat the surface of equipments than those respondents who are aware of the need to do so. A high percentage of the respondents also said they use alcohol sponge to treat the surface of each equipment in order to prevent infectious diseases.

• Journal of Technologic Dentistry
• /
• v.17 no.1
• /
• pp.41-57
• /
• 1995

This study was conducted to collect and analyze previous information in order to manage efficience, improve experience effect and promote employment rate. The questionnaire interview with 27 chief of dental Laboratory refered clinical experience in technology department about clinical experience in 14 Jumior colleges were also investigated. The results were summarried as follows : The portion of age of 35-39 among chief of dental Laboratory was 40.7% which was the highest, that of male was 96.3%, that of junior college graduate was 97.5%, that of 10years experience was 92.6% and that of ceramic technician was 85.2%, 63.0% dental laboratory for clinical experience was a bore space of 30pyong. Aspect of dental laboratory management, manufacturing all part of prosthetic restoration was 29.6%, othodontic appliance and ceramic restoration was 7.4%, 3.8%, each. The percentage of 40.7 was having connection with 30-3a dental clinics and referring case per day was 10-19 cases(40.7%), manufacturing time of referred prosthetic restoration was 3-4 days(77.8%), places preparing seminar room for education was 29.6%, above a place of 40pyong was 11.1% 30-34 pyong and 35-39 pyong was 7.4% each. During training of 2 years education course student, 18.5% was rack of thorough occupational career. While 44.4% will want the more salary among 3years education course student, 74.1% will expect the more dental techmicians would engaged in their field, 51.9% will hope improve of their theory and practice, 29.6% be expected better skill and 14.8% be expected better theory. Attitude of clinical experience places was distributed by 59.3% of offering only experience chance, 25.9% of wasting time and 29.0% of annoying. The big emphasis of climical experience was thorough occupational career(44.4%). The clinical experience places of our college were selected after direct visiting, so their condition of management was not that bad but most of dental laboratory were poor in management state and working environment. Therefore it is difficult to choose appropriate places and dental Laboratory are also limited manpower and time as suppliers. So that it recommended to induce flexible management of experience period by interval and rotation of experience places among college and to applicate intern-system for employment ant industry-college cooperation aspect.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.317-323
• /
• 2022

This study aimed to qualitative analyze the cusp variation pattern of the mandibular second premolars using a three-dimensional virtual models, and to analyze the left-right bilateral symmetry with a quantitative analysis of the tooth surface area according to the cusp variation. 127 virtual mandibular second premolars were prepared and individual absolute/relative cusp area, total crown area and groove form were analyzed using RapidForm2004(INUS technology INC, Seoul, Korea). Independent t-test, Kruskal-Wallis test and chi-square were performed. As a result, the groove form showed high bilateral symmetry between the left and right sides. Based on the left side of groove form, the bilateral symmetry was 100.0% for the U pattern, and 73.7% for the H patterned, and 78.9% for the Y pattern(p<.001). The finding could be as a meaningful reference for manufacturing CAD/CAM dental prostheses, and it is expected that further studies will be conducted on more samples including the mandibular second premolar immediately after eruption.

• Journal of Technologic Dentistry
• /
• v.10 no.1
• /
• pp.89-111
• /
• 1988

This study relates to the procedures and the attitude of dental technicians. In order to identify the attitude factors which have influence on the job satisfaction and the organizational commitment, self-administered questionnares were distributed by mail to 504 technicians randomlyselected from 482 dental laboratories registered in Korean Dental Lab. Association from February 6 to February 27, 1987. The following results were obtained: 1. Canonical correlation between the group of general variables and the group of job satisfactional variables was significant statistically as Rc=0.48. But canonical correlation between the group of general variables and the group of organizational commitment variables was insignificant statistically as Rc=0.37. 2. Canonical correlation between the group of job characteristic variables and the group of job satisfactional variables was highly significant statistically as Rc=0.69. Wage propriety, promotion opportunity and benefits propriety were highly influential factors among the job characteristic variables. 3. Canonical correlation between the group of job characteristic variables and the group of organizational commitment variables was highly significant statistically as Rc=0.61. Wage propriety, promotion opportunity of acquiring technique and duty importance were highly influential factors among the job characteristic variables. 4. The job characteristic variables which had influence on the job satisfaction varied statistically according to the general variables. in case of age, technical career, academic career and duty, the job characteristic variable was wage propriety and the business relations. 5. The job characteristic variables which had influence on the organizational commitment varied statistically according to the general variables. The case of male was applicable to wage propriety, the case of female was applicable to benefits propriety, the case of dental technicians who were less than 30 years old was applicable to wage propriety, the case of dental technicians who had more than 5 years technical career was applicable to monotonousness. 6. The most influential factor was wage propriety among job characteristic variables which influenced on the job satisfaction and the organizational commitment of dental technicians.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.3.1-3.9
• /
• 2019

Background: The infratemporal fossa (ITF) is an anatomical lateral skull base space composed by the zygoma, temporal, and the greater wing of the sphenoid bone. Due to its difficult approach, surgical intervention at the ITF has remained a heavy burden to surgeons. The aim of this article is to review basic skull base approaches and ITF structures and to avoid severe complications based on the accurate surgical knowledge. Methods: A search of the recent literature using MEDLINE (PubMed), Embase, Cochrane Library, and other online tools was executed using the following keyword combinations: infratemporal fossa, subtemporal fossa, transzygomatic approach, orbitozygomatic approach, transmaxillary approach, facial translocation approach, midface degloving, zygomatico-transmandibular approach, and lateral skull base. Aside from our Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) trial, there have been very few randomized controlled trials. The search data for this review are summarized based on the authors' diverse clinical experiences. Results: We divided our results based on representative skull base approaches and the anatomy of the ITF. Basic approaches to the ITF include endoscopic endonasal, transzygomatic, orbitozygomatic, zygomatico-transmandibular, transmaxillary, facial translocation, and the midfacial degloving approach. The borders and inner structures of the ITF (with basic lateral skull base dissection schemes) are summarized, and the modified zygomatico-transmandibular approach (ZTMA) is described in detail. Conclusions: An anatomical basic knowledge would be required for the appropriate management of the ITF pathology for diverse specialized doctors, including maxillofacial, plastic, and vascular surgeons. The ITF approach, in conjunction with the application of microsurgical techniques and improved perioperative care, has permitted significant advances and successful curative outcomes for patients having malignancy in ITF.