• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.209-216
• /
• 2004

The purpose of this study is to introduce how to make implant supported over denture with Oring. Many kinds of attachments have used to dental restorations. The application of attachment has widely increased implant fixed prosthesis and implant supported over denture. In order that implant supported over denture have properly retention, generally used O-ring, magnetic, bar attachment. O-ring give us an advantage that is required more minimum vertical dimension than bar-type and easily replace with new part. When we make these prosthesis using O-ring, Bar, Ball attachment, we should following procedures. Strong occlusion force leads to fracture of over denture because part of functional mechanism as implant abutment or attachment is spaced. Clips are regularly activated. O-ring and springs are changed every year. The pattern of resorption should be carefully monitored and compensated for by relining procedures. If the over denture appears to rest on the bar or the ball attachments, relining should be performed and clips/caps should be changed.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.73-78
• /
• 2005

The surface-reacted layer of titanium castings greatly affects their mechanical properties. This study analyzed the interfacial zone of Ti-20%Zr-5%Cr alloy castings obtained from phosphate bonded investment and examined the relationship between the surface-reacted layer and hardness. The Vickers hardness of cast disks were tested at 20$\mu m$ intervals from the surface to 120$\mu m$ in depth. The cross-section was observed metallurgically, and line profile of the reacted layer was conducted under the EDX. The surface-reacted layer of Ti-20%Zr-5%Cr alloy is showed a similar tendency to Ti-6%Al-4%V alloy in thickness, and also Si diffusion in multiple reacted layer of Ti-20%Zr-5%Cr alloy is less than cp Ti and similar to Ti-6%Al-4%V alloy. The Vickers hardness in the surface layer was greater than in the inner part, and the Vickers hardness of Ti-20%Zr-5%Cr alloy ranged 650 to 390 and cp Ti ranged 810 to 160, Ti-6%Al-4%V alloy ranged 710 to 530 respectively.

• 대한치과기공학회지
• /
• 제29권2호
• /
• pp.213-223
• /
• 2007

The success of a porcelain fused to metal (PFM) restoration depends upon the quality of the porcelain-metal bond. The adhesion between metal substructure and dental porcelain is related to the diffusion of oxygen to the reaction layer formed on cast-metal surface during firing. The purposed of this investigation was to study the effects of gold based bonding agent on Ni-Cr alloy-ceramic adhesion between porcelain matrix, gold based bonding agent and metal substructure interface. gold based bonding agent have been applied as an intermediate layer between a metal substructure and a ceramic coating. gold based bonding agent(Aurofilm NP, Metalor, Swiss) was applied on Ni-Cr alloy surface by four method. Surfaces only air abraded with 110${\beta}\neq$ Al2O3 particles were used as control. metal ceramic adhesion was evaluated by a biaxial flexure test(N=5) and volume fraction of adherent porcelain was determined by SEM/EDS analysis. Result of this study suggest that the layering sequence of gold based bonding agent is very important and can improve porcelain adherence to PFM.

• 대한치과기공학회지
• /
• 제40권3호
• /
• pp.173-180
• /
• 2018

Purpose: The purpose of this study was to verify the remake rate and cause of dental prosthesis and to investigate major factors of remake of dental prosthesis. Methods: This study carried out self-administered questionnaire survey from 126 nationwide dental laboratory CEO and directors, which was conducted from September to October in 2016. Results: Total remake rate of dental prosthesis was 10.1% at the nationwide dental laboratories. It was in order of remake rate of dental prosthesis 11.8% for CAD/CAM, 11.5% for porcelain and 11.0% for implant prosthesis. Error of clinical impression was the highest remake cause(63.7%). Nevertheless, dental laboratory take the responsibility of expense for remake of dental prosthesis, regardless of remake cause(67.4%). There was no relation between dental laboratory characteristics and the remake rate of dental prosthesis(p>.05). Conclusion : The remake rate of dental prostheses should be reduced to minimize the economic loss of dental laboratories and raise dental prosthesis satisfaction. It is required to communicate of dentist, dental technicians, and patients, moreover, undistorted information about oral environment should be provided to the dental technicians.

• 대한심미치과학회지
• /
• 제18권1호
• /
• pp.39-54
• /
• 2009

• 대한치과기공학회지
• /
• 제28권1호
• /
• pp.251-257
• /
• 2006

• 대한치과기공학회지
• /
• 제30권2호
• /
• pp.165-172
• /
• 2008

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2000년도 추계학술대회
• /
• pp.27-28
• /
• 2000

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.89-95
• /
• 2005

In the manufacture of ceramo-metal crown, difference of fracture strength according to the metal depth has been known to be an important influence on enough intensity and internal stress to endure an occlusion-pressure as well as aesthetics of rehabilitating similar colour such as natural teeth. Depth of ceramic material could be determined by that of metal in three groups: first case of thin depth, second case of thick depth, and third case of constant depth. For the enhancement of the fracture strength between metal and ceramic materials and aesthetic satisfaction, a study on the bonding force, fracture strength, and aesthetics have been required more. In this study, therefore metal coping were made in three groups of A, B and C by using both ceramic powder of Norithe and metal of Columbium, which have been used primarily in the market. A group was made in $0.2mm\times10mm\times10mm$, B group was made in $0.4mm\times10mm\times10mm$, and, C group was made in $0.8mm\times10mm\times10mm$, respectively. The number of metal coping in each group was 10, and total sample numbers used in this study were 30 metal copings. After these metal coping tissue were in the process of build-up in 1.5mm constant depth of porcelain, firing, and glazing, the fracture strength about each metal coping tissue was investigated using oil press. It was found that the average values of durable occlusion pressure for separation of ceramic material in the porcelain fused to metal crown (PFM) in the each group showed the increasing order of A group (30 bar), B group (42 bar), and C group (44 bar), respectively. Proper depth of metal coping in the PFM was considered to be 0.4mm in the B group because this metal size showed higher durable property to the occlusion pressure and better coupling strength in the ceramo-metal crown.

• 한국치위생학회지
• /
• 제8권3호
• /
• pp.139-148
• /
• 2008

A fluorine solution was used to measure the growth of S.mutans and the pH changes were also measured in order to find an effective and preventative dentistry lab within a limited time for the dental hygiene department curriculum and the following results were obtained. 1. In the growth comparison of S.mutans, the culture medium of the experiment group with fluorine weighed 0.3g and the culture medium with no fluorine weighed 0.5g, which shows that the growth rate of S.mutans is significantly decreased in the culture medium with the fluorine. 2. The pH7.8 of the culture medium was not nearly changed; it became 7.0 after culturing with fluoride, however the pH was significantly decreased to 3 in the culture medium that had no fluorine. 3. Since it has been proven that the fluorine can control the growth of germs, it is believed that the effect of fluorine as a cavity preventative should be emphasized to students and in addition, it will help students transmit the effect of fluoride to their patients since this knowledge has been acquired through practice. 4. It is considered that this is a simple test protocol providing effective results in the microorganism and preventive dentistry lab within a limited time and furthermore, it will furnish the students of dental hygiene with comprehensive accessibility to dental hygiene curriculum.