• The KSFM Journal of Fluid Machinery
• /
• v.18 no.5
• /
• pp.54-58
• /
• 2015

The objective of this paper is to investigate the flow characteristics of the multi nozzle. The configurations of the single, the 3- and the 6-nozzle were selected under Mach number of 2.5. Under-expanded pressure ratio such as 1.2, 1.6 and 2.0 were selected to elucidate interference of the free jet. The flow visualization was carried out with the Schlieren system and a supersonic cold-flow system. Also, the flow characteristics were studied computationally with the density measurements. Reasonable agreement between experimental and theoric equation has been achieved qualitatively.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.34-35
• /
• 2004

Three dimensional density distributions of impinging and eccentric flames have been investigated by digital speckle tomography. The flames have been ignited by a mixture of butane and air from a circular nozzle and impinged against a plate located at the upper side of the burner exit. For comparison with experimental data, computer synthesized phantoms of impinging and eccentric flames have been reconstructed by a developed three-dimensional multiplicative algebraic reconstruction technique (MART). The advanced reconstruction in the stagnation flow region involved the sharp change of the flow direction and pressure gradient has been developed using a cross-correlation method and new scanning technique for the speckle displacement.

• BMB Reports
• /
• v.44 no.5
• /
• pp.347-351
• /
• 2011

The testis is major male gonad responsible for spermatogenesis and steroidogenesis. Much knowledge is still remained to be learned about the control of these events. In this study, we performed a comprehensive bioinformatics analysis on 1,196 mouse testis proteins screened from public protein database. Integrated function and pathway analysis were performed through Database for Annotation, Visualization and Integrated Discovery (DAVID) and ingenuity Pathway Analysis (IPA), and significant features were clustered. Protein membrane organization and gene density on chromosomes were analyzed and discussed. The enriched bioinformatics analysis could provide clues and basis to the development of diagnostic markers and therapeutic targets for infertility and male contraception.

• Journal of ILASS-Korea
• /
• v.6 no.2
• /
• pp.22-28
• /
• 2001

Recently, many researches have been performed to improve the combustion and emission in a D.I.Diesel engine. Especially reduction of the soot formation in the combustion chamber is the essential to acquire the improvement of the emission performance. This emission of the diesel combustion is effected by the characteristics of air-fuel mixing. Therefore, the optical measurement technique such as LII and LIS were established in order to visualize the distribution of the soot and analyze the particle including spray in the combustion chamber. In this study, we developed the algorithm for calculating relative diameter and density of particle and applied this method to measure stimultaneously the distribution of soot and spray in a D.I. diesel engine. From this experiment we found that the soot is existed in the rich region of spray and generated caused by incapable air fuel mixture.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.04a
• /
• pp.19-28
• /
• 2004

유동장의 특성을 구분할 수 있는 척도는 평균자유행로와 특성거리의 비인 누센수이다. 누센수에 따라서 유장은 연속체영역, 미끄럼영역, 천이영역, 및 자유분자영역으로 나누어진다. 고고도에서 비행체 주위의 유동장, 진공에서의 유동장 등이 비연속체영역 즉 저밀도유동장에 해당된다. 비연속체영역에 해당되는 또 다른 중요한 분야는 미세 유동장이다. 최근에 관심이 대두되고 있는 미세항공기(MAV)와 실리콘혁명 이래 유망한 미래기술중의 하나인 MEMS 장치 주위의 유동장 등이 바로 미세 유동장이다. 비연속체영역에서 유체의 이동 및 전달현상을 기술하기 위하여는 Boltzmann 방정식을 해석하여야한다. Navier-Stokes 방정식을 이용한 기존의 CFD 기법이 적용되지 않는 새로운 유동영역이기 때문이다. 본 발표에서는 Boltzmann 방정식의 유력한 해법인 직접모사(Direct Simulation Monte Carlo)법을 이용한 저밀도 유동장 해석이 소개될 것이다. 또한 직접모사법이 이용되기 어려운 다양한 저속 유동장에 대한 해석결과도 소개될 것이다.

• Journal of Energy Engineering
• /
• v.10 no.2
• /
• pp.83-89
• /
• 2001

This paper studies the possibility of applying the EIT(Electrical Impedance Tomography) technique for investigating the formation and movement of dispersed phase droplets as they stream through a Direct Contact Heat Exchanger(DCHX). In most direct contact liquid-liquid heat exchangers, oil or hydro-carbon with a density different (lighter or heavier) from water is normally used as dispersed working fluid. The main difficulty that arises with arrangement lies in the extraction of performance parameters and visualization of dispersed phase fluids if required. In order to delve into these problems, this paper introduces a number of cases regarding the operation and principle of DCHXs and investigates the possibility of applying the EIT technique whose results are given for several examples.

• Journal of ILASS-Korea
• /
• v.4 no.3
• /
• pp.8-14
• /
• 1999

The characteristics of the breakup process in supercritical spray is investigated during the injection of supercritical sulfur hexafluoride into dissimilar gases at supercritical pressures and subcritical temperature of the injected fluid. The visualization techniques used are backlighting and shadowgraph methods. The spray angles are measured and the breakup and mixing process are observed at near and supercritical conditions. The results show that spray angles are decreased with the in..ease of the ratio of density $(\frac{\rho_f}{\rho_g})$. At the supercritical temperature, the spray angles in atomization region are kept nearly constant such as the typical spray angle in gas injection. The mixing process is changed radically at the temperature where $\frac{d\rho}{dT}=\frac{1}{2}[\frac{d\rho}{dT}]_{max}$ at given pressure.

• Journal of ILASS-Korea
• /
• v.17 no.3
• /
• pp.158-163
• /
• 2012

This paper presents spray characteristics of piezo-driven type common-rail injector and comparisons to those of solenoid-driven type. Experiments were conducted to measure spray penetraion and SMD distributions using a spray visualization system and PDPA (phase Doppler particle analyzer) system. Injection conditions including injection pressure and energizing durations were varied in order to analyzing effects of injection conditions on spray characteristics. Furthermore, ambient pressures were increased for keeping ambient gas density close to in-cylinder pressure of diesel engine. Results showed that injection delay of piezo-driven type injector was much shorter than those of solenoid driven type and exhibited enhanced atomization performances.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.576-584
• /
• 2007

A PIV(Particle Imaging Velocimetry) diagnostic technique for the evaluation of the flow characteristics in refrigerator is introduced. Smoke particles of which density is small enough to follow up the air flow are used for visualization of the air flows in the refrigerators. A rectangular room model is tested for the verifications of the dignostic technique. By evaluating the turbulent intensity and the deviation value of the turbulent intensity distribution that were obtained from PIV results, an optimal ventilating condition is suggested. The constructed technique is used for the diagnostics on the flow of an actual refrigerator. It has experimentally proved that the present technique is able to evaluate the ventilation conditions of refrigerators.

• Plant Resources
• /
• v.8 no.3
• /
• pp.175-180
• /
• 2005

Thin sections of cellulose fibers were incubated with an endo- and an exoglucanase labeled with gold particles of differing sizes. The hydrolytic sites were then visualized under transmission electron microscopy (TEM). The potential interaction between the ${\beta}$-1, 4-glucan substrates and the endo- and the exoglucanases was investigated using cellulosic and lignocellulosic substrates. The simultaneous visualization was very successful in distinguishing preferred substrates for each cellulase in lignocellulosic substrates. When plant lignocellulose was preincubated with endocellulase, density of the gold labeling greatly increased suggesting that preliminary exposure of lignocellulosic material to endocellulase may have enhanced the accessibility of the substrate to endocellulase and exocellulase. This result provided a plausible explanation for the observed endo/exo cellulase co-hydrolysis.