• 한국측량학회지
• /
• 제27권4호
• /
• pp.445-452
• /
• 2009

항공라이다를 이용한 도시지역 3차원 모델링에 대한 연구가 활발히 진행되고 있으며, 이를 위한 최적 점밀도 결정은 도시지 역 3차원 모델링의 성과 및 효율적인 항공라이다 활용을 위해 매우 중요 하다. 본 연구는 도시지역 항공라이다의 최적 점 밀도 결정을 위해 표본 점 밀도를 선정 하였다. 각 표본 점 밀도별 DSM 및 건물 외곽선을 이용해 최적 점 밀도 결정을 위한 시각적 평가 및 정확도 검사를 실시하였으며, 도시지역 항공라이다를 위한 최적 점 밀도를 제시 하였다.

• Journal of the Korean Statistical Society
• /
• 제31권2호
• /
• pp.261-276
• /
• 2002

Probability density or its derivatives may have a discontinuity/change point at an unknown location. We propose a method of estimating the location and the jump size of the discontinuity point based on kernel type density or density derivatives estimators with one-sided equivalent kernels. The rates of convergence of the proposed estimators are derived, and the finite-sample performances of the methods are illustrated by simulated examples.

• 대한한의학회지
• /
• 제15권2호
• /
• pp.241-252
• /
• 1994

It is known that the pattern of combustion temperature can be classified into preheating, heating. retaining and cooling periods. In this experiment. the authors have studied the heating mechanism by the density of moxa material during the heating and retaining periods. The starting point. the point at which it begins to reach the maximum gradient temperature. the ending point of the heating period. and the ending point of the retaining period were measured in order to get effective stmulation by repetition of moxa-combustion. For the experiment. samples of 300mg. 400mg, and 500mg of moxa material were molded into conical molds with each 10mm in diameter and height resulting in the volume of $0.26cm^3$. The following results were obtained: The $300mg/0.26cm^3$ denstiy sample reached al1 points tested faster than the samples of $400mg/0.26cm^3$ and $500mg/0.26cm^3$ It dose not reveal any statistical differences between $400mg/0.26cm^3$ and $500mg/0.26cm^3$ in the ending point. the point at which it begins to reach the maximum gradient temperature of the heating period or the ending point of the reataining period The only difference shown was in the starting point of the heating period. According to the above results. it is concluded that the lower density moxa material reached each point of the the respective period faster than the high density moxa material.

• 한국물환경학회지
• /
• 제26권5호
• /
• pp.761-767
• /
• 2010

This study introduces a model of territorial analysis on Chungcheongnam-do Nonsan-chun valley area, which gives an example of a method of selecting the management area for non-point pollution source from land use to help eliminate its source. High discharge load per unit area signify high level of land ratio with high level of basic unit of development load (including factory sites, school sites, roadways), which mean that there are a significant level of urbanization. It is these areas with the examination of the water quality of the nearby river that should be considered as the management area for non-point pollution source. Thus, the management area for non-point pollution source should be sought in areas with high discharge load per unit area and high density of water pollution area. When level of drainage is high the pollution density level is relatively lower, and when the level of drainage is low the density level is relatively higher. The level of pollution from non-point pollution source is much lower with more water flowing through. The possible non-point pollution source areas that were selected with these standards were then examined with the distance from the river, the slope angle, land usage, elevation, BOD discharge density load, T-N discharge density load, T-P discharge density load, and were given a level one through five. Out of the possible areas Nonsan-si Yeonmu-eup Anshim-li was the densest area, and it was given level one. The level one area should be examined further with the field analysis to be selected as the actual management area for non-point pollution source.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.487-494
• /
• 2012

A new low cost high power density photovoltaic power conditioning system (PV PCS) with an energy storage system is proposed in this paper. Its high power density and cost effectiveness can be achieved through the unification of the maximum power point tracker and the battery charger/discharger. Despite the reduced power stage, the proposed system can achieve the same performance in terms of maximum power point tracking and battery charging/discharging as the conventional system. When a utility power failure happens, the proposed system cannot perform maximum power point tracking at the UPS mode. However, the predetermined battery voltage near the maximum power point of the PV array can effectively generate a reasonable PV power even at the UPS mode. Therefore, it features a simpler structure, less mass, lower cost, and fewer devices. Finally, to confirm the operation, validity, and features of the proposed system, a theoretical analysis and experimental results from a single phase AC 220Vrms/1.5kW prototype are presented.

• Spatial Information Research
• /
• 제16권2호
• /
• pp.237-247
• /
• 2008

지도좌표를 가진 정보의 통계적 분석은 GIS 중요기능 중 하나로 인정되고 있다. 그 중 가장 기본적인 분석의 하나로 점사상에 대한 밀도분석이 이루어지고 있다. 밀도분석은 일반적으로 라스터 분석의 일부로 간주되고 있으며, 적합한 밀도분석을 위해서는 kernel 반경으로 알려진 검색반경의 결정이 중요한 것으로 알려져 있다. 본 연구에서는 기존 연구 결과에서 검색반경 설정에 유용한 것으로 알려진 L-지표를 이용하여, 비즈니스 GIS 분야에 축적된 점사상의 밀도 분석에 적합한 반경을 추정하고, 추정된 결과를 기반으로 점사상의 특성에 따른 L-지표의 거동을 고찰하였다. 연구결과 점사상이 대상지역의 일부 지역에서 크게 밀집되는 경우에는 L-지표가 대상지역의 크기와 무관하게 일정한 반경에서 극대값을 보이기 때문에 L-지표를 이용하여 검색반경을 설정하는 것이 유용함을 알 수 있었다. 반면, 점사상이 대상지역에 고루 분포하는 경우에는 L-지표의 극대값이 나타나는 반경이 대상지역의 크기에 따라 영향을 받기 때문에 L-지표를 이용하여 검색반경을 설정하는 것이 적합하지 않음을 알 수 있었다. 따라서 L-지표를 이용한 점사상 밀도의 검색반경 설정에는 점사상의 분포특성이 고려되어야 함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.35-38
• /
• 2000

In this study, the rise throughput and the stability in fabrication of device can be obtained by applying of CMP process to STI structure in 0.l8um semiconductor device. Through reverse moat pattern process, reduced moat density at high moat density, STI CMP process with low selectivity could be to fit polish uniformity between low moat density and high moat density. Because this reason, in-situ motor current end point detection method is not fit to the current EPD technology with the reverse moat pattern. But we use HSS without reverse moat pattern on STI CMP and take end point current sensing signal.[1] To analyze sensing signal and test extracted signal, we can to adjust wafer difference within $110{\AA}$.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.619-625
• /
• 1998

저온소성용 글라스/세라믹 복합체 제조시 사용되는 유리 프릿트의 연화점과 유리의 함량이 소결특성에 미치는 영향에 대해 고찰하였고, 이에 따라 고밀도의 저온소성용 글라스/세라믹 복합체를 제조하였다. 유리의 함량이 증가함에 따라 복합체의 소결밀도는 증가하였고, 이때 사용되는 유리의 연화점이 낮을 경우 유리의 함량이 적은 시현의 경우에도 변형이 일어남을 알수 있었다. 유리의 연화점이 높은 유리를 사용한 시편의 경우, 유리의 함량을 증가시켜도 시편의 변형은 일어나지 않았으며, 소결밀도는 계속적으로 증가하여 치밀화가 하고 있음을 알수 있었다. 이러한 유리함량과 유리의 연화점이 소결특성에 미치는 영향을 고찰함으로써 높은 밀도의 동시소성용 글라스/세라믹을 제조할 수 있는 유리의 연화점과 유리함량을 예측할 수 있었고, 이에따라 $790^{\circ}C$의 연화점을 갖는 유리를 유리 프릿트로 사용함으로써 $900^{\circ}C$의 소성온도에서 소결밀도 97%이상의 고밀도의 저온소성용 글라스/세라믹 복합체를 제조할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4492-4507
• /
• 2021

In camera sensor networks (CSNs), in order to better identify the point, full-view problem requires capture any facing direction of target (point or intruder), and its coverage prediction and sensor density issues are more complicated. At present, a lot of research supposes that a large number of homogeneous camera sensors are randomly distributed in a bounded square monitoring region to obtain full-view rate which is close to 1. In this paper, we deduce the sensor density prediction model in heterogeneous deployed CSNs with arbitrary full-view rate. Aiming to reduce the influence of boundary effect, we introduce the concepts of expanded monitoring region and maximum detection area. Besides, in order to verify the performance of the proposed sensor density model, we carried out different scenarios in simulation experiments to verify the theoretical results. The simulation results indicate that the proposed model can effectively predict the sensor density with arbitrary full-view rate.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.9-18
• /
• 2011

In this study the optimal volume for non-point source control retention is estimated considering spatio-temporal variation of land surface. The 3-parameter mixed exponential probability density function is used to represent the statistical properties of rainfall events, and NRCS-CN method is applied as rainfall-runoff transformation. The catchment drainage area is divided into individual $30m{\times}30m$ cells, and runoff curve number is estimated at each cell. Using the derived probability density function theory, the stormwater probability density function at each cell is derived from the rainfall probability density function and NRCS-CN rainfall-runoff transformation. Considering the antecedent soil moisture condition at each cell and the spatial variation of CN value at the whole catchment drainage area, the ensemble stormwater capture curve is established to estimate the optimal volume for an non-point source control retention. The comparison between spatio-temporally varied land surface and constant land surface is presented as a case study for a urban drainage area.