• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.196-197
• /
• 2013

This study is the experiment for manufacturing the Lightweight non-cement matrix based on the Blast furnace slag. And, the matrix was manufactured matrix by generating the bubble just by the reaction of KOH that is the alkali accelerator and paper ash, instead of the general foaming agent, that is the waste managed of incineration the pulp sludge generated in the process of manufacturing the paper. Consequently, the density according to the addition rate of KOH represented the tendency to increase. And it showed up that density of the matrix adding KOH 22.5% was the lowest. As to the strength test result, strength following addition rate of KOH increased. Since the bubble is generated in the reaction of KOH and paper ash, this shows the very low intensity but it is determined to be the result that the amount of vacant space is decreased because the bubble generated in the mixture process comes up as the specific gravity difference.

• Korean Journal of Materials Research
• /
• v.24 no.9
• /
• pp.474-480
• /
• 2014

Process conditions for the impregnation of polycarbosilane preceramic polymer into SiC-based composites were investigated. Two kinds of preceramic polymer (PCP) was impregnated into SiC-fiber fabrics with different solvents of n-hexane and divinylbenzene (DVB). Both microstructural observations and mechanical tests were conducted to evaluate the impregnation. The matrix phases were particulated in the case of hexane solvents. Apparent relative density of the matrix was about 78.8%. The density of matrix was increased to about 96.1-98.8% when the DVB was used; however, brittle fracture was observed during a bending test. The modulus of toughness was less than $0.74J/m^3$. The fabric impregnated with a mixed PCP-dissolved solution showed intermediate characteristics with relative high density of filling (apparent density of ~96.1%) as well as proper bending behavior. The modulus of toughness was increased to about $5.31J/m^3$. The composites developed by changing the precursor and solvent suggested the possibility of fabricating SiCf/SiC composites without a fiber to matrix interphase coating.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.423-429
• /
• 2001

Prediction of the variation in annual biomass was conducted for the white croaker. Argyrosomus argentatus in Korean waters using leslie Matrix, based upon fishery data for the past 21 years and biological data, We used density-independent and density-dependent Leslie Matrix models. Similar parameters were estimated from two models except that the density-dependent model was influenced by the density effect variable, q(i,t), The eigenvalue of the white croaker population for the $1984\~1995$ period was estimated to be 0.8, indicating a declining pattern of the population. The survival rate of 0-th year class was calculated to be 0.00005. Based on the schedule of the age-specific survival rate and fecundity, the future biomass and catch was predicted for various levels of fishing mortalities (F), If F was set at 0.252/yr ($F_{35x}$) or 0.368/yr ($F_{0.1}$), the biomass and catch increased, and if F was set at 0.922 ($F_{current}$), the biomass and catch decreased, The fishing mortality at equilibrium was estimated to be 0.7/yr. Finally, the management strategy of the white croaker was discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.436-444
• /
• 2005

Unitary matrix modulation (UMM) is investigated in multiple antennas system that is called unitary space-time modulation (USTM). In an OFDM, the diagonal components of UMM with splitting over the coherence bandwidth (UMM-S/OFDM) have been proposed. Recently LDPC code is strongly attended and studied due to simple decoding property with good error correction property. In this paper, we propose LDPC coded UMM-S/OFDM for increasing the system performance. Our proposed system can obtain frequency diversity using UMM-S/OFDM like USTM/OFDM, and large coding gain using LDPC code. The superior characteristics of the proposed UMM-S/OFDM are demonstrated by extensive computer simulations in multi-path Rayleigh fading channel.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.557-562
• /
• 2005

Low-density parity-check (LDPC) codes have recently emerged due to their excellent performance. However, the parity check (H) matrices of the previous works are not adequate for hardware implementation of encoders or decoders. This paper proposes a hybrid parity check matrix which is efficient in hardware implementation of both decoders and encoders. The hybrid H-matrices are constructed so that both the semi-random technique and the partly parallel structure can be applied to design encoders and decoders. Using the proposed methods, the implementation of encoders can become practical while keeping the hardware complexity of the partly parallel decoder structures. An encoder and a decoder are designed using Verilog-HDL and are synthesized using a $0.35 {\mu}m$ CMOS standard cell library.

• Journal of electromagnetic engineering and science
• /
• v.7 no.1
• /
• pp.28-34
• /
• 2007

In this paper, we present a quasi-Jacket block matrices over binary matrices which all are belong to a class of cocyclic matrices is the same as the Hadamard case and are useful in digital signal processing, CDMA, and coded modulation. Based on circular permutation matrix(CPM) cocyclic quasi block low-density matrix is introduced in this paper which is useful in coding theory. Additionally, we show that the fast algorithm of quasi-Jacket block matrix.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.119-122
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of 1 vol.% carbon nanotube (CNT)-metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT-Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature. It was found by mechanical testing of the consolidated 1 vol.% CNT-Cu that high mechanical strength could be achieved effectively as a result of the Cu matrix strengthening and improved particle bonding during ECAP. The ECAP processing of powders is a viable method to achieve fully density CNT-Cu nanocomposites.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.1-4
• /
• 1999

The attenuation coefficients of SiC particle reinforced low-density polyethylene (LDPE) matrix composites were measured by pulse echo method and dynamic elastic measure method with varying the volume fraction of SiC particle ranged from 0% to 40% and the size of SiC particles ranged from 0.8$\mu$m to 48$\mu$m. The SiCp/LDPE composites were fabricated with the melt injection process and the fabricated composites showed almost full density above 99% up to 40vo1% SiCp reinforcements. The attenuation constant of LDPE measured by dynamic elastic constant had same result with that measured by pulse echo method, but the attenuation constant of SiCp/LDPE measured by dynamic elastic constant did not have same result with that measured by pulse echo method.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.595-598
• /
• 1988

In this paper, a new folding algorithm for design of high density PLA's is proposed. This algorithm generates transform matrix so that programmed region of each row becomes narrow. Based on transform matrix, folding pair is selected. In the process of generating transform matrix, interval degree and dense degree are used to improve folding ratio. This paper also proposes an efficient folding pair graph which has short time of selection folding pair. This proposed algorithm is named PLAFOLII and implemented in C language on VAX-11/750 (UNIX) computer. Through various example, efficiency of this algorithm is verified.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.559-563
• /
• 2013

This paper analytically proves the equivalence between two main oscillator phase noise theories, which are based on the ISF, and Floquet vector, respectively. For this purpose, this study obtains the power spectral density matrix from the ISF-based phase noise theory. As a result, one can prove that the power spectral density matrix obtained from the ISF-based phase noise theory is essentially equivalent to the power spectral density matrix presented by the Floquet vector-based phase noise theory, which manifests the equivalence of the two main theories. This study is intended to provide deeper insight into the relations between the two main theories.