• Research in Plant Disease
• /
• v.28 no.2
• /
• pp.61-68
• /
• 2022

Powdery mildew and two-spotted spider mite are detrimental to strawberry plants and are controlled with traditional pesticides. To accommodate consumer demand, eco-friendly methods of pest control are required. Strawberries were cultivated (in soil and in a hydroponic system) for two years, and ultraviolet B (UV-B) irradiation was used as an alternative pest control during the harvesting season. Three varieties were grown (Seolhyang, Kingsberry, and Durihyang), and four UV-B lamp/mulch (black, green, and light reflection sheet [LRS]) combinations were used during harvesting: UV-B+black or green mulch, UV-B+black or green+LRS, no UV-B+black or green, and no UV-B+black or green+LRS. In all varieties, powdery mildew was 65% more controlled when UV-B irradiation was used. The adult two-spotted spider mite density was lowest in the UV-B lamp+black or green+LRS treatments. Therefore, UV-B irradiation during the strawberry harvesting season could effectively control powdery mildew and two-spotted spider mite with little side effect on the plants.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.283-288
• /
• 1982

This experiment was carried out to improve the cultural practices of seedlings and to investigate the proper planting density in aromatic tobacco, Sohang. Two different cultural practices of seedling were employed; Temporary transplanting (TT; Conventional practices) and non temporary transplanting (N.T.). Vinyl pot sizes were $3.5cm{\times}3.5cm, \;4cm{\times}4cm$ and $5cm{\times}5cm$ Plants per hole were 1, 3, 5, 7 and 9. There were little difference among the vinyl pot sizes in all characters except the survival ratio. But it may be little problem on cultural practices by 7 plants per hole in $5cm\times$5cm vinyl pot. There were not significant in price per kg, yield per 10a and value per 10a between two cultural practices of seedlings and among three pot sizes. Mildness and filling power were increased by increasing the plants per hole. Combustibility of 5-9 plants were better than those of 1-3 plants per hole. The growing of 6 seedlings per hole in $5cm\times$5cm vinyl pot by non temporary transplanting resulted the best cultural practices for an aromatic tobacco, Sohyang.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.175-185
• /
• 2023

Recently, novel viral infections such as COVID-19 have spread and pose a serious public health problem. In particular, these diseases have a fatal effect on the elderly, threatening life and causing serious social and economic losses. Accordingly, applications such as telemedicine, healthcare, and disease prevention using the Internet of Things (IoT) and artificial intelligence (AI) have been introduced in many industries to improve disease detection, monitoring, and quarantine performance. However, since existing technologies are not applied quickly and comprehensively to the sudden emergence of infectious diseases, they have not been able to prevent large-scale infection and the nationwide spread of infectious diseases in society. Therefore, in this paper, we try to predict the spread of infection by collecting various infection information with regional limitations through a virus disease information collector and performing AI analysis and severity matching through an AI broker. Finally, through the Korea Centers for Disease Control and Prevention, danger alerts are issued to the elderly, messages are sent to block the spread, and information on evacuation from infected areas is quickly provided. A realistic elderly support system compares the location information of the elderly with the information of the infected area and provides an intuitive danger area (infected area) avoidance function with an augmented reality-based smartphone application. When the elderly visit an infected area is confirmed, quarantine management services are provided automatically. In the future, the proposed system can be used as a method of preventing a crushing accident due to sudden crowd concentration in advance by identifying the location-based user density.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.81-81
• /
• 2003

The stochiometric mixture of evaporating materials for the CuGaSe$_2$ single crystal thin films were prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal CuGaSe$_2$, it was found tetragonal structure whose lattice constant no and co were 5.615$\AA$ and 11.025$\AA$, respectively. To obtains the single crystal thin films, CuGaSe$_2$ mixed crystal was deposited on throughly etched GaAs(100) by the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were 61$0^{\circ}C$ and 45$0^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5${\mu}{\textrm}{m}$/h. The crystalline structure of single crystal thin films was investigated by the double crystal X-ray diffraction(DCXD). Hall effect on this sample was measured by the method of van der pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by pizoelectric scattering in the temperature range 30K to 150K and by polar optical scattering in the temperature range 150K to 293K. The optical energy gaps were found to be 1.68eV for CuGaSe$_2$ single crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation then the constants in the Varshni equation are given by a=9.615$\times$ 10$^{-4}$ eV/K, and $\beta$=335K. From the photocurrent spectra by illumination of polarized light of the CuGaSe$_2$ single crystal thin films. We have found that values of spin orbit coupling ΔSo and crystal field splitting ΔCr was 0.0900eV and 0.2498eV, respectively. From the PL spectra at 20K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be 0.0626eV and the dissipation energy of the acceptor-bound exciton and donor-bound exciton to be 0.0352eV, 0.0932eV, respectively.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.519-531
• /
• 2023

With the aim of preventing safety accidents at construction sites, the company aims to create safe behaviors intended through variables called smart safety and health activities to help reduce industrial accidents. Purpose: It analyzes how smart safety and health activities affect accidents caused by unsafe behavior and changes in worker behavior, which is the root cause, and verifies the hypothesis that it helps prevent safety accidents and protect workers' lives. Method: Smart safety and health activities were selected as independent variables (X), and intended safety and anxiety, which are workers' behavioral intentions, were set as dependent variables (Y), attitude and subjective norms, and planned behavioral control as parameters (M). Exploratory factor analysis, discriminant validity analysis, and intensive validity analysis of safety and health activities were used to analyze the scale's reliability and validity. To verify the hypothesis of behavior change, the study was verified through Bayesian model analysis and MC simulation's probability density distribution. Result: It was found that workers who experienced smart safety and health activities at construction sites had the highest analysis of reducing unstable behavior and performing intended safety behavior. The research hypothesis that this will affect changes in worker behavior has been proven, the correlation between variables has been verified in the structural equation and path analysis of the research analysis, and it has been confirmed that smart safety and health activities can control and reduce worker instability. Conclusion: Smart safety and health activities are a very important item to prevent accidents and change workers' behavior at construction sites.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.10
• /
• pp.51-58
• /
• 2023

The dynamic behavior of the group piles supporting the superstructure in an earthquake is influenced by different complex dynamic mechanisms by the inertia force of the superstructure and the kinematic force of the ground. In an earthquake, The dynamic p-y curve is used to analyze the dynamic behavior of the pile foundation in consideration of the interaction of the ground, pile foundation, and superstructure due to the inertia force and the kinematic force. Most of the research has been conducted in order to confirm the dynamic p-y curve of the pile foundation by applying to the pile foundation installed on the single layered ground consisting of sand and clay, but the research for the multiple layered ground is insufficient. In this study, 1g shaking table tests were conducted to analyze the effect of the strata ratio of the top and bottom ground of the two layered sandy ground which has different relative densities on the dynamic behavior of group piles supporting the superstructure. The result shows that the maximum acceleration in the ground, the pile cap, and the superstructure increases as the strata ratio increases, and the location of the maximum bending moment of the pile foundation is changed. In addition, it was confirmed that the slope of the dynamic p-y curve of the pile foundation increased and decreased according to the strata ratio.

• Journal of Korea Water Resources Association
• /
• v.56 no.9
• /
• pp.587-602
• /
• 2023

Due to climate change, population growth, and economic development, the demand for water in the urban water system (UWS) and the energy required for water use constantly increase. Therefore, beyond the traditional method of considering only the water sector, the Nexus approach, which considers synergies and trade-offs between the water and energy sectors, has begun to draw attention. In previous researches, the Nexus methodology was used to demonstrate that the UWS is an energy-intensive system, analyze the water-energy efficiency relationship surrogated by energy intensity, and identify climate (long-term climate change, drought, type), geographic characteristics (topography, flat ratio, location), system characteristics (total supply water amount, population density, pipeline length), and operational management level (water network pressure, leakage rate, water saving) effects on the UWS. Through this, it was possible to suggest the direction of policies and institutions to UWS managers. However, there was a limit to establishing and implementing specific action plans. This study built the energy intensity matrix of the UWS, quantified the impact of city conditions, external influences, and operational management levels on the UWS using the water-energy Nexus model, and introduced water-energy efficiency criteria. With this, UWS managers will be able to derive strategies and action plans for efficient operation management of the UWS and evaluate suitability and validity after implementation.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.39-46
• /
• 2023

Pine trees, which account for 23% of the forested area of the Republic of Korea, are highly vulnerable to fire in comparison to broad-leaved trees due to the presence of consistent water tube sections throughout the year and resin that is composed of approximately 20% oil. In addition, the pattern of forest fires is determined by weather, topographic conditions, and fluctuation in moisture content. Therefore, when fire breaks out in pine tree forests during the dry season (January to March), it is difficult to extinguish, and it quickly spreads. In this study, the combustion characteristics of pine needles, pine cones, and pine branches in the water tube sections of living pine trees were compared and analyzed in accordance with the moisture content as per the ISO 5660-1. The monthly moisture content was analyzed from January to March, and it was found to be the lowest in March, with 53.6% for pine needles, 51.9% for pine branches, and 10.9% for pine cones. In particular, pine cones were more vulnerable to fire as compared to pine needles and pine branches because their moisture content was more than five times lower than that of pine needles and branches. The ignition time, which affects the speed of flame propagation, was the most rapid in March, and the fastest ignition time was for pine cones, at 19 seconds, followed by 34 seconds for pine needles, and 256 seconds for pine branches. The pine branches were the last to be ignited due to the effect of density, according to the thickness and specific gravity of the specimen. The peak heat release rate, which is a measurable index of fire intensity, was analyzed for pine cones and found to be 184.28 kW/m² , while the mean effective heat of combustion was 19.79 MJ/kg, and the total heat release rate was 39.7 MJ/m² , and these values were higher than those of pine branches and pine needles. Thus, we determined that the flame propagation speed and fire intensity according to the moisture content can be used to evaluate the risk of fire to the water tube section of pine trees. It is suggested that because of the combustion characteristics of the pine cone in March, that is when the forest is most vulnerable to fires.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.685-690
• /
• 2023

It was analyzed that the volume of deep excavation works adjacent to existing underground structures is increasing according to the population growth and density of cities. Currently, many underground structures and tracks are damaged by external factors, and the cause is analyzed based on the measurement results in the tunnel, and measurements are being made for post-processing, not for prevention. The purpose of this study is to analyze the effect on the deformation of the structure due to the excavation work adjacent to the urban railway track in use. In addition, the safety of structures is evaluated through machine learning techniques for displacement of structures before damage and destruction of underground structures and tracks due to external factors. As a result of the analysis, it was analyzed that the model suitable for predicting the structure management standard value time in the analyzed dataset was a polynomial regression machine. Since it may be limited to the data applied in this study, future research is needed to increase the diversity of structural conditions and the amount of data.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.5
• /
• pp.143-151
• /
• 2007

The factors affecting the geotechnical properties of cemented sands are known to be relative density, cementation level, stress level, and particle characteristics such as particle size, shape and surface conditions. It has been widely accepted that the friction angle of cemented sands is not affected by cementation while the cohesion of cemented sands was significantly influenced by cementation. The cementation that is a critical component of the strength of cemented sands will be broken with increasing confining pressure and great caution is required in evaluating the cohesion of cemented specimens due to their fragilities. In this study, a series of drained shear tests were performed with specimens at various cementation levels and confining stresses to evaluate the strength parameters of cemented sands. From the experiments, it was concluded that the cohesion intercept of cemented sand experiences three distinctive zone(cementation control zone, transition zone, and stress control zone), as the cementation level and the confining stress varies. In addition, for accurate evaluation of the strength parameters, the level of confining stress triggering the breakage of cementation bond should be determined. In this study, the relationship between the maximum confining stresses capable of maintaining the cementation bond intact and unconfined compression strength of the cemented sand was established.