• Journal of Marine Life Science
• /
• v.6 no.1
• /
• pp.23-30
• /
• 2021

The differentiation process of male germ cells and sperm morphology of the abalone Haliotis discus hannai were described in ultrastructure. The differentiation process of sperm was divided into four stages: spermatogonium, spermatocyte, spermatid and sperm. The process of differentiation from spermatogonium to spermatocyte did not show significant morphological changes. However, during the spermiogenesis there were distinct morphological changes such as chromatin condensation, morphological changes of the nucleus, and formation of acrosome, midpiece and flagellum. The sperm of the abalone consisted of head, midpiece and tail. The head of approximately 5.3 ㎛ in length was composed of a nucleus of high electron dense and bullet-shaped acrosome. The midpiece was composed of the basal body and mitochondria, and five mitochondria were arranged in single layer around the basal body. The cross section of the tail showed a "9+2" axonemal structure. These morphological and structural features are the result of showing that the sperm of H. discus hannai is a primitive type.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.5 no.1
• /
• pp.1-8
• /
• 2012

Purpose: The purpose of this study is to report the preliminarily result of the radiologic disappearance of the calcific material, regardless of the size, type or location, on one-time ultrasonographic (US) assisted needling for calcific tendinitis of the shoulder. Materials and Methods: From March to August 2011, 46 patients (47 shoulders) with symptomatic calcific tendinitis were treated by one-time US assisted needling. Initially, a diagnostic US was performed with patient to determine the locations, numbers and sizes of calcific deposits. After 1% lidocaine local anesthesia, the calcific material was punctured with an 18-gauge needle under US monitoring. If no calcific material was aspirated after 2 or 3 additional attempts, the deposits was performed multiple puncture to achieve decompression. And then all patients were performed subacromial corticosteroid injection. All patients were followed up 4 weeks after procedure. To assess the radiologic disappearance after one-time US assisted needling, simple radiographs of the treated shoulder were performed and size, dense, and morphology of the calcific deposits were compared with those in baseline radiographs. For clinical evaluations, visual analogue scale for pain and function (PVAS and FVAS), and American Shoulder and Elbow Surgeons (ASES) score were assessed. Results: There were 11 male and 35 female patients with the mean age of 53.8 years (28-71). The morphology of the calcific deposits were 31 type A and 16 type B by French Arthroscopic Society classification and mean size was $2.9{\pm}6.7$ mm before the procedure. At 4 weeks after the index procedure, the radiographic unchanged group was included in 10 cases and changed group was 37 cases. No intergroup difference for the clinical results after the procedure was evident, but group FAS classification before the procedure was significantly different (p=0.011). Conclusion: At 4 weeks after one-time US assisted needling for calcific tendinitis of the shoulder, the radiographic size- or dense-changed cases were showed in 79%, regardless of the size, type or location of the calcific material. But the radiographic nearly or complete disappearance were showed in only 21%.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.4
• /
• pp.478-486
• /
• 2000

Background : In acute lung injury, alveolar macrophages play a pivotal role in the inflammatory process during the initiation phase and in the reconstruction and fibrosis process during the later phase. Recently, it has been proven that alveolar macrophages are constituted by morphologically, biochemically and immunologically heterogenous cell subpopulations. The possibility of alterations to these characteristics of the alveolar macrophage population during lung disease has been raised. To investigate such a possibility a hyperoxic rat lung model was made to check the distributional and morphological changes of rat alveolar macrophage subpopulation in acute hyperoxic lung injury. Method : Alveolar macrophage were lavaged from normal and hyperoxic lung injury rats and separated by discontinuous gradients of percoll. After cell counts of each density fraction were accessed, the morphomeric analysis of alveolar macrophages was performed on cytocentrifuged preparations by transmission electron micrograph. Result : 1. The total alveolar macrophage cell count significantly increased up to 24 hours after hyperoxic challenge (normal control group $171.6{\pm}24.1{\times}10^5$, 12 hour group $194.8{\pm}17.9{\times}10^5$, 24 hour group $207.6{\pm}27.1{\times}10^5$, p<0.05). oHoHH However the 48 hour group ($200.0{\pm}77.8{\times}10^5$) did not show a significant difference. 2. Alveolar septal thickness significantly increased up to 24 hours after hyperoxic challenge(normal control group $0.7{\pm}0.2{\mu}m$, 12 hour group $1.5{\pm}0.4{\mu}m$, 24 hour group $2.3{\pm}0.4{\mu}m$, p<0.05). However the 48 hour group did not show further change ($2.5{\pm}0.4{\mu}m$). Number of interstitial macrophage markedly increased at 24 hour group. 3. Hypodense fraction(fraction 1 and fraction 2) of alveolar macrophage showed a significant increase following hyperoxic challenge ($\beta=0.379$.$\beta=0.694$. p<0.05) ; however, fraction 3 was rather decreased following the hyperoxic challenge($\beta=0.815$. p<0.05), and fraction 4 showed an irregular pattern. 4. Electron microscopic observation of alveolar macrophage from each fraction revealed considerable morphologic heterogeneity. Cells of the most dense subfraction(fraction 4) were small, round, and typically highly ruffled with small membrane pseudopods. Cells of the least dense fraction (fraction 1) were large and showed irregular eccentric nucleus and high number of heterogenous inclusions. Conclusion : In conclusion, these results suggest that specific hypodense alveolar macrophage subpopulation may play a an important role in an acute hyperoxic lung injury model But further study, including biochemical and immunological function of these subpopulations, is needed.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.709-714
• /
• 1997

$TiO_2$ hydrate coating on mica in an aqueous solution of $TiOSO_4$ by the hydrolysis using ammonia water studied with emphasis on coating conditions for a uniform coating. For the uniform coating of $TiO_2$ film on mica surface, it was found that smaller mica particles were coated more uniformly compared to larger particles. It was necessary to suppress the rate of formation of hydrated $TiO_2$ particles in solution, which were deposited on mica and generate irregular coating. It was also necessary to control precipitation yield by varying the reaction temperature to obtain uniform coating. More uniform coating was obtained with higher precipitation yield. A uniform dense film was formed when mica particles of average size of $14.7{\mu}m$ is used for mica slurry solution, of which pH is 2.5, and the factor of acidity of $TiOSO_4$ solution is 291, and the solution was kept at $80^{\circ}C$ for 3 hours. The morphology of $TiO_2$ film formed on mica was little affected by firing at $900^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.50-60
• /
• 1976

For finding out the proper method of developing Buxus koreana var. insularis, this study was carried out in Pokil-Do, Wan-Do, Chonnam, in 1975. The ecology, morphology and characteristics of the plant were mainly investigated and analyzed. The results are summarized as follows; 1. The small islands of the southern sea of Korea; Pokil-Do, Chin-Do and So-Huk-San-Do, turn out to be the site of the natural communities of B. koreana var. insularis. 2. The growth of the plant is fairly good in the acid soil of these islands. 3. This vegetation of composed as the three-layered communities, these communities consit of Camellia, Buxus and Cares. 4. The plant is a board leaved evergreen shrub that is tolerant to shade and native to the temperate zone. 5. The size of the leaves, fruits and seeds is slightly larger than those of B. koreans. 6. As fruiting and germination of the seeds are favorable. it is easy for us to make a number of seedlings. 7. The proper times for sowing and harvesting the seeds are around the middle of July and August, respectively. 8. The seedlings is difficult to grow in the naked ground because the germinated seeds are seriously damaged by frost. 9. The plant growth per annum is about 8 to 10cm in height, 1.5mm in diameter. It is graceful looking as the branches and leaves as of the dense foliage type 10. It is possible to develop the plant in many ways, such as; ornamental plant, bee plant, sculptural and industrial materials.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.99-105
• /
• 2015

PURPOSES: In this study, alkali-activated blast-furnace slag (AABFS) was investigated to determine its capacity to absorb carbon dioxide and to demonstrate the feasibility of its use as an alternative to ordinary Portland cement (OPC). In addition, this study was performed to evaluate the influence of the alkali-activator concentration on the absorption capacity and physicochemical characteristics. METHODS: To determine the characteristics of the AABFS as a function of the activator concentration, blast-furnace slag was activated by using calcium hydroxide at mass ratios ranging from 6 to 24%. The AABFS pastes were used to evaluate the carbon dioxide absorption capacity and rate, while the OPC paste was tested under the same conditions for comparison. The changes in the surface morphology and chemical composition before and after the carbon dioxide absorption were analyzed by using SEM and XRF. RESULTS: At an activator concentration of 24%, the AABFS absorbed approximately 42g of carbon dioxide per mass of paste. Meanwhile, the amount of carbon dioxide absorbed onto the OPC was minimal at the same activator concentration, indicating that the AABFS actively absorbed carbon dioxide as a result of the carbonation reaction on its surface. However, the carbon dioxide absorption capacity and rate decreased as the activator concentration increased, because a high concentration of the activator promoted a hydration reaction and formed a dense internal structure, which was confirmed by SEM analysis. The results of the XRF analyses showed that the CaO ratio increased after the carbon dioxide absorption. CONCLUSIONS : The experimental results confirmed that the AABFS was capable of absorbing large amounts of carbon dioxide, suggesting that it can be used as a dry absorbent for carbon capture and sequestration and as a feasible alternative to OPC. In the formation of AABFS, the activator concentration affected the hydration reaction and changed the surface and internal structure, resulting in changes to the carbon dioxide absorption capacity and rate. Accordingly, the activator ratio should be carefully selected to enhance not only the carbon capture capacity but also the physicochemical characteristics of the geopolymer.

• Journal of Oral Medicine and Pain
• /
• v.35 no.1
• /
• pp.19-29
• /
• 2010

Phytoncide, essential oil of trees, has microbicidal, insecticidal, acaricidal, and deodorizing effect. The present study was performed to examine the effect of phytoncide on Candida albicans, which is a commensal colonizer of the mucous membranes but has become an opportunistic pathogen. C. albicans was incubated with or without phytoncide extracted from Hinoki (Chamaecyparis obtusa Sieb. et Zucc.; Japanese cypress) and then changes were observed in its optical density, cell viability and morphology. As concentrations of phytoncide added to the culture medium increased, optical density and cell viability of C. albicans decreased. Minimum inhibitory concentration of phytoncide for C. albicans was observed to be 0.25%, and minimum fungicidal concentration was 0.5%. Numbers of morphologically atypical cells with electron-dense cytoplasm and granules and increased with increasing concentration of the phytoncide. At higher concentrations of phytoncide, compartments and organelles in the cytoplasm became indistinguishable. The overall results indicate that the phytoncide used for this study has a strong antimicrobial activity against C. albicans. Therefore, the phytoncide may be used as a candidate for prevention and therapeutic agent against oral candidiasis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.180-184
• /
• 2001

Cleidocranial Dysplasia(CCD) is an autosomal dominant human bone disease characterized by abnormal clavicles, patent sutures and fontanelles, and dental anomalies. Among dental anomalies, it is characterized that permanent dentition is severly disturbed due to multiple supernumerary teeth and abnormalities of tooth morphology. A eight-year-old female patient diagnosed as cleidocranial dysplasia visited in our hospital. Upon clinical oral exam, retained deciduous teeth, constriction of dental arch, anterior cross bite, and multiple dental caries were observed. In the dental panoramic radiograph, retained deciduous teeth and multiple supernumerary teeth in the maxilla and the mandible were found. In the cephalometric radiograph, open sutures and wormian bones were seen. In the chest P-A view absence of clavicles was observed. The cleidocranial dysplasia patients have eruption problems in permanent dentition both in regions with and without supernumerary teeth. The severely delayed or arrested eruption of permanent teeth has been ascribed to various factors : 1) The presence of multiple supernumerary teeth, 2) malformed roots with lack of cellular cementum, 3) the jaw bone being too dense, and 4) abnormal resorption of bone and primary teeth. Formation and maturation of primary teeth in cleidocranial dysplasia are normal, whereas the permanent dentition has various anomalies. Therefore, dentists should understand the development of dentition in cleidocranial dysplasia, and treat them in proper time.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.57-57
• /
• 2010

We report the discovery of a bright mid-infrared (MIR) source with prominent crystalline silicate emission using the space telescope AKARI and Spitzer. This source, IRAS 15099-5856, has a spectacular morphology with a bright central compact source (CCS) surrounded by knots, spurs, and several extended (~4') arc-like filaments. The source is seen only in infrared at ${\geq}10{\mu}m$. The Spitzer MIR spectrum of the CCS shows prominent emission features from Mg-rich crystalline silicates and strong [Ne II] 12.88 ${\mu}m$ and several other faint ionic lines. We model the MIR spectrum as thermal emission from several independent dust components and compare their properties to those of the Herbig Be star HD 100546 which shows very similar MIR spectrum. Our molecular line observations reveal two molecular clouds around the source, but no associated dense molecular cores. We discuss two possible origins for IRAS 15099-5856; a deeply embedded massive young stellar object on the other side of the Galaxy and a disrupted, protoplanetary disk being photoevaporated by the UV radiation from the nearby O star Muzzio 10.