• 멤브레인
• /
• 제15권3호
• /
• pp.198-205
• /
• 2005

방사능 오염도 측정에 사용하기 위한 이중구조 고분자막이 폴리설폰과 세륨활성화된 이트륨실리케이트(CAYS)를 이용하여 제조되었다. 제조된 막은 순수 고밀도 고분자 지지층과 이에 제막된 고분자 용액의 상전환 공정에 의해 고형화된 CAYS 함침 활성층의 이중구조로 구성된다. 제막공정에서 대기방치 공정이 생략되었을 때 CAYS를 포함하는 활성층은 전형적인 비대칭 구조를 지니며, CAYS 입자들이 고분자 구조 사이에 박혀있는 형상을 지닌다. 제막공정에서 대기에 방치하는 시간이 증가할수록 막의 형상은 스폰지 구조를 띠며 CAYS는 고분자 구조로부터 분리되어 막 내부에 셀 같은 공간에 밀집되어 존재함을 보였다. 한편, 두 충 사의 계면형상은 고분자 고형화 과정에서의 상전환 속도와 밀접한 관련되었으며, 대기방치 시간의 증가에 따라 계면의 구분이 뚜렷하게 나타나지 않았다. 방사능 탐지 특성에서 스폰지 구조를 지니는 막의 고분자 구조는 방사성핵종이 통과할 수 없는 밀집된 형상을 지니면서 탐지효율의 감소를 초래하는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.381-386
• /
• 2010

Some basic properties of inorganic coatings hardened by the room temperature reaction with alkalies were examined. The coating paste was prepared from the powders in the system $Al_2O_3-SiO_2$-CaO using blast furnace slag, fly ash and amorphous ceramic fiber after mixing with a solution of sodium hydroxide and water glass. The mineralogical and morphological examinations were performed for the coatings prepared at room temperature and after heating to $1200^{\circ}C$ respectively. The binding force of the coating hardened at room temperature was caused by the formation of fairly dense matrix mainly composed of oyelite-containing amorphous phase formed by the reaction between blast furnace slag and alkali solution. At the temperature, fly ash and ceramic fiber was not reacted but imbedded in the binding phase, giving the fluidity to the paste and reinforcing the coating respectively. During heating up to $1200^{\circ}C$, instead of a break in the coating, anorthite and gehlenite was crystallized out by the reaction among the binding phase and unreacted components in ternary system. The crystallization of these minerals revealed to be a reason that the coating maintains dense morphology after heating. The maintenance of binding force after heat treatment is seemed to be also caused by the formation of welldispersed fiber-like mineral phase which is originated from the shape of the amorphous ceramic fiber used as a raw materials.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.219-224
• /
• 2020

Al₂O₃ powders with particle sizes of 0.35 ㎛, 0.5 ㎛, 1.5 ㎛, and 2.5 ㎛ are deposited onto glass and Cu substrates using the aerosol deposition (AD) process. The deposition characteristics of Al₂O₃ films using those four types of Al₂O₃ powders are investigated to determine the influence of the particle size on the films. To observe detailed micro-structures of the films, the cross-section and surface morphology are observed. Then, the crystalline size and internal strain are calculated from X-ray diffraction peaks in order to confirm the hammering effect as well as the micro-strain during the AD deposition. From the above results, deposition mechanisms related to the particle size are studied. The results of this study indicate the optimal particle size and formation mechanisms for dense Al₂O₃ film with a smooth surface roughness as well as for a porous Al₂O₃ film with a rough surface roughness.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.1-8
• /
• 2019

The $Cu(In,Ga)Se_2$ (CIGS) thin film obtained by two-step process (metal deposition and Se annealing) has a rough surface morphology and many voids at the CIGS/Mo interface. To solve the problem a precursor that contains Se was employer by depositing a (In,Se)/(Cu,Ga) stacked layer. We devised a two-step annealing (vacuum pre-annealing and Se annealing) for the precursor because direct annealing of the precursor in Se environment resulted in the small grains with unwanted demarcation between stacked layers. After vacuum pre-annealing up to $500^{\circ}C$ the CIGS film consisted of CIGS phase and secondary phases including $In_4Se_3$, InSe, and $Cu_9(In,Ga)_4$. The secondary phases were completely converted to CIGS phase by a subsequent Se annealing. A void-free CIGS/Mo interface was obtained by the two-step annealing process. Especially, the CIGS film prepared by vacuum annealing $450^{\circ}C$ and subsequent Se annealing $550^{\circ}C$ showed a densely-packed grains with smooth surface, well-aligned bamboo grains on the top of the film, little voids in the film, and also little voids at the CIGS/Mo interface. The smooth surface enhanced the cell performance due to the increase of shunt resistance.

• 천문학회보
• /
• 제45권1호
• /
• pp.43.1-43.1
• /
• 2020

Cassiopeia A (Cas A) is a young supernova remnant (SNR) where we observe the interaction of SNR blast wave with circumstellar medium. From the early optical studies, dense, slowly-moving, N-rich "quasi-stationary flocculi" (QSF) have been known. These are probably dense CNO-processed circumstellar knots that have been engulfed by the SNR blast wave. We have carried out near-infrared, high-resolution (R=45,000) spectroscopic observations of ~40 QSF, and here we present the result on a QSF knot (hereafter 'Knot 24') near the SNR boundary of Cas A. The average [Fe II] 1.644 um spectrum of Knot 24 has a remarkable shape with a narrow (~8 km/s) line superposed on the broad (~200 km/s) line emitted from shocked gas. The spatial morphology and the line parameters indicate that Knot 24 has been partially destroyed by a shock wave and that the narrow line is emitted from the unshocked material heated/ionized by the shock radiation. This is the first detection of the emission from the pristine circumstellar material of the Cas A supernova progenitor. We also detected H Br gamma and other [Fe II] lines corresponding to the narrow [Fe II] 1.644 um line. For the main clump where we can clearly identify the shock emission associated with the unshocked material, we analyze the observed line ratios using a shock model that includes radiative precursor. The analysis indicates that the majority of Fe in the unshocked material is in the gas phase, not depleted onto dust grains as in the general interstellar medium. We discuss the non-depletion of Fe in QSF and its implications on the immediate progenitor of the Cas A supernova.

• The Korean Journal of Physiology and Pharmacology
• /
• 제14권5호
• /
• pp.317-324
• /
• 2010

We elucidated the distribution of interstitial cells of Cajal (ICC) in human stomach, using cryosection and $c-Kit$ immunohistochemistry to identify $c-Kit$ positive ICC. Before $c-Kit$ staining, we routinely used hematoxylin and eosin (HE) staining to identify every structure of human stomach, from mucosa to longitudinal muscle. HE staining revealed that the fundus greater curvature (GC) had prominent oblique muscle layer, and $c-Kit$ immunostaining $c-Kit$ positive ICC cells were found to have typical morphology of dense fusiform cell body with multiple processes protruding from the central cell body. In particular, we could observe dense processes and ramifications of ICC in myenteric area and longitudinal muscle layer of corpus GC. Interestingly, $c-Kit$ positive ICC-like cells which had morphology very similar to ICC were found in gastric mucosa. We could not find any significant difference in the distribution of ICC between fundus and corpus, except for submucosa where the density of ICC was much higher in gastric fundus than corpus. Furthermore, there was no significant difference in the density of ICC between each area of fundus and corpus, except for muscularis mucosa. Finally, we also found similar distribution of ICC in normal and cancerous tissue obtained from a patient who underwent pancreotomy and gastrectomy. In conclusion, ICC was found ubiquitously in human stomach and the density of ICC was significantly lower in the muscularis mucosa of both fundus/corpus and higher in the submucosa of gastric fundus than corpus.

• 식물분류학회지
• /
• 제38권2호
• /
• pp.163-177
• /
• 2008

마타리족(Patrinieae $H{\ddot{o}}ck$, Valerianaceae)에 속하는 마타리속과 Nardostachys속의 17분류군(14종과 추가된 2아종, 1변종)의 화분을 광학현미경과 주사전자현미경, 그리고 투과전자현미경으로 관찰하였다. 화분의 크기는 주로 중립($37.41{\times}43.60{\mu}m$ - $45.65{\times}48.50{\mu}m$)에서 대립($54.88{\times}59.41{\mu}m$ - $61.70{\times}71.00{\mu}m$)까지 나타나고, 발아구는 3구형이며 드물게 4구형이다. 화분립 발아구의 가장자리에는 'halo'라는 마타리과 화분에서 나타나는 공통적인 형질을 갖고 있으며, 화분립의 모양은 적도면에서 단구형에서 약장구형이고, 극축면은 3갈래로 갈라지거나 원형이다. 마타리족의 화분은 표면무늬에 따라서 크게 두가지 유형으로 구별되어진다; (1) Type I: 과립상돌기(verrucae)가 약간 발달하거나 거의 없고, 자상돌기(echinae)가 과립상돌기 위에 발달하며 미세자상돌기(microehinae)가 산재한 형태(Nardostachys속, 마타리속의 Paleopatrinia절, Monanadropatrinia절), (2) Type II: 과립상 돌기가 잘 발달하고, 자상돌기가 과립상돌기 위에 매우 크게 발달하며 미세자상돌기가 조밀하게 화분표면을 덮고 있는 형태(마타리속의 Centrotrinia절). 투과전자현미경을 이용한 연구에서 원주층은 기저층으로부터 과립상돌기로 연결되고, 표벽의 두께는 극과 적도에서 동일하다. 본 연구결과를 통해 마타리족의 분류체계가 검토되었다.

• 한국한의학연구원논문집
• /
• 제12권3호통권18호
• /
• pp.101-115
• /
• 2006

The purpose of this study was to introduce the differential standard of the types of Angelicae Pubescentis Radix. We established the classificatory standard according to the external and internal morphology and the physicochemistrical pattern for the four types of Aucklandiae Radix. The results follow: 1. At the external shape, Angelica pubescens f. biserrata has rising lenticel and dark brown surface, Its section is light gray and its xylem is yellow gray. Aralia continentalis has big stem mark in upper portion, its section has no dense tissue with yellow gray. Heracleum hemsleyanum has dark brown surface and little lenticel, its cortical layer is white yellow and xylem is isabella and powdered. 2. At the internal shape, Angelica pubescens f. biserrata has phloem with half of the root and rare vessel. Aralia continentalis has phloem with two-thirds of the root and it has broad cutting and putting vessel that formed 1-2 row. Heracleum hemsleyanum also has phloem with half of the root and wide scattered latex tube and many large vessel. 3. At the TLC pattern, Heracleum hemsleyanum has remarkable dark spot at $R_{f}$ 0.23 on the sulphuric acid color pattern test, but others have faint. 4. At the HPLC pattern, all samples have generally patterns. But Angelica pubescens f. biserrata shows diminutive continentalic acid content and the peak at Rt 20.278min comes out on Heracleum hemsleyanum, but do not come out on Aralia continentalis and Angelica pubescens f. biserrata. Heracleum hemsleyanum has remarkable peak at Rt 20.278min, but shows no peak at Rt 29.023min unlike Aralia continentalis or Angelica pubescens f. biserrata. Also Aralia continentalis and Angelica pubescens f. biserrata show one remarkable peak at Rt 29.023, but Heracleum hemsleyanum do not show. Consequently, Aralia continentalis and Angelica pubescens f. biserrata are comparable whit continentalic acid content and Heracleum hemsleyanum is comparable with the peak at Rt 20.273 and Rt 29.023. So it is thought that content of continentalic acid and the peaks at Rt 20.278 and Rt 29.023 can apply to differentiate a species from other. It is considered the results of this study will be furnished the basis to succeeding studies and it is needed to extensive comparative study for the same genus-degree of relatedness.

• 열처리공학회지
• /
• 제22권5호
• /
• pp.307-311
• /
• 2009

In this study, TiCrN films were deposited on STS 316 Land Si (100) wafer by inductively coupled plasma (ICP) assisted D.C. magnetron sputtering. The effect R.F. power for ICP discharge on the mechanical properties of TiCrN films was investigated. XRD, XPS and FE-SEM were used for the structure analysis. Also the Micro-Knoop hardness tester and profilometer were used for measuring hardness of coatings and film stress respectively. As increasing the R.F. power for ICP discharge, thickness of coating was decreased from 1633 nm to 1288 nm but hardness was increased about $Hk_{5g}$ 4200 at 400 W. All of the XRD patterns showed (111), (200) and (220) peaks of TiCrN films. Surface morphology was studied using the profilometer. FE-SEM was used to know morphology and cross-section of the films. Structure of the films was changed dense as increased ICP power.

• Applied Microscopy
• /
• 제47권2호
• /
• pp.70-74
• /
• 2017

In the case of genus Nothobranchius, Nothobranchiidae, the morphology of fertilized eggs and ultrastructures of fertilized egg envelopes have been reported in only two fishes. Therefore it is hard for sure to these morphological characteristics show genus specificity because of lower research samples. So, we studied the morphology of fertilized egg, and compared the ultrastructures of outer surface, micropyle, and section of fertilized egg envelopes under the light and electron microscopes from the other two species, Nothobranchius foerschi and Nothobranchius rachovii, Nothobranchiidae to find out whether these structures have the species specificity or not. Both fertilized eggs were spherical, demersal and adhesive, and have a large oil droplet. The adhesive whip-like structures were distributed on the outer surface of egg envelope, and a micropyle located on the animal pole. The fertilized egg envelope consisted of two distinct layers: an outer electron-dense layer with adhesive structures and an inner lamellae layer in both species. The external shapes of fertilized egg and ultrastuctures of outer surface, micropyle, and section of fertilized egg envelope have same structure including results before. Our data indicate that these morphological characteristics of fertilized egg and fertilized egg envelope show genus Nothobranchius specificity.