• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.705-711
• /
• 2013

In this paper, we present a low-complexity non-coherent demodulation algorithm and hardware architecture for LR-WPAN systems which can support the variable data rate for various applications. The need for LR-WPAN systems that can support the variable data rate is increasing due to the emergence of various sensor applications. Since the existing symbol based double correlation (SBDC) algorithm requires the increase of complexity to support the variable data rate, we propose the sample based double correlation (SPDC) algorithm which can be implemented without the increase of complexity. The proposed non-coherent demodulator was designed by verilog HDL and implemented with FPGA prototype board.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1939-1941
• /
• 2004

밀도는 플라즈마의 기본적인 물리적 성질을 이해하는데 중요한 인자로 인식되고 있으며 많은 방법들이 밀도분포의 측정에 이용되었다. 이 중 마이크로파 진단법의 하나인 레플렉토메터리는 그 고유한 특성 때문에 현재 밀도분포측정법으로써 폭넓게 활용되고 있다. 그러나 레플렉토메터리 신호에 대한 처리 및 분석 방법은 다양하여 주어진 플라즈마에 가장 절적한 방법을 선택하는 것은 쉽지 않다. 본 논문에서는 레플렉토메터리의 신호로부터 밀도분포를 정확히 재구성하는 알고리즘을 개발하기 위한 기초 단계로써 모의된 레플렉토메터리 선호에 기존의 신호해석법들 중 우수한 해석법으로 알려진 CDM(complex demodulation method)과 웨이브레트(wavelet) 분석법을 적용하여 밀도분포재구성에 대한 양자의 성능을 비교한다. 그리고 플라즈마의 특성에 기초하여 모의된 신호에 실제 상황에서 존재할 수 있는 잡음신호를 첨가하여 이것이 밀도분포 재구성에 미치는 효과를 조사한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1202-1207
• /
• 2006

In this paper we analyze the performance improvement of the M-ary FSK systems for low power and low data rate applications. This contribution presents a unified analysis of its MRC diversity, uncoded and performance in A WGN, m=2, m=3, Rayleigh and one sided Gaussian fading channels using optimum noncoherent demodulation with Reed-Solomon(RS) codes. The results of this paper should be useful as benchmarks of obtainable performance and as a reference for validating the results of simulation studies when slow fading models are applicable.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.997-1004
• /
• 2012

In this paper, we propose and implement a signal quality measurement algorithm for CDMA2000 1x terminal. The proposed algorithm is suitable to be implemented in software on a PC-based platform and extract the received signal after carrying out equalization, PN code acquisition and tracking, frequency and phase offset compensation with 4-oversampled input signal. Then, through despreading and demodulation with the extracted signal, the proposed algorithm regenerate the reference signal to be used in measurement. The signal quality is measured using this regenerated signal and the extracted signal.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.2
• /
• pp.44-50
• /
• 2012

When the fiber Bragg gratings are embedded in a fiber-optic Sagnac loop for measuring temperature or strain, it is difficult to separate the Bragg wavelengths. The transmitted light is mixed with the reflected Bragg wavelengths in the photo-detector, working as noises. To suppress the noises, we placed the FBG sensors and a fiber-optic attenuator at asymmetric positions in the loop. With the arrangement the reflected light became much bigger than the transmitted light, enabling the separation of the reflected Bragg wavelengths with almost the same signal-to-noise ratio of the FBG sensors outside the loop.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.69-72
• /
• 2000

This paper shows the more improved design of MRI receiver compared to conventional one based on Elscint Spectrometer. At first, the low-cost ADC is 16 bits, 3MHz sampling A/D converter Comparing to conventional one with signal bits of 14 bits, this device with those of 16 bits helps getting Improved the image resolution improved. If frequency is designed centering around 7.6 MHz to be satisfied in 10 MHz of maximum input bandwidth of ADC. For 1st demodulation, fixed IF is used for the purpose of the implementing multi nuclei system. Control parts & partial digital parts are integrated on one chip(FPGA). In DDC(Digital Down Converter), we got required bandwidth of LPF by controlling its decimation rate. With above considerations, we designed optimal receiver for high resolution imaging to be implemented through PC interface & experimental test of receiver of MRI after receiver's fabrication.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.659-662
• /
• 2005

A parameterized FFT/IFFT core generator (PFFT_CoreGen) is designed, which can be used as an essential IP (Intellectual Property) in various OFDM modem designs. The PFFT_CoreGen generates Verilog-HDL models of FFT cores in the range of 64 ${\sim}$ 2048-point. To optimize the performance of the generated FFT cores, the PFFT_CoreGen can select the word-length of input data, internal data and twiddle factors in the range of 8-b ${\sim}$ 24-b. Some design techniques for low-power design are considered from algorithm level to circuit level.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.318-321
• /
• 2003

In case, sensor system performs where it is difficult to access physically and it is in the poor environment, it is limited to communicate by using wire and installing power module in sensor system. In this paper, it suggests how information is obtained from telemetry sensor by means of inductive coupling without battery. Comparing with the telemetry sensor system of inductive coupling by the power supply, this system estimates the capacitance of sensor with high precision in using RLSE, not the process of modulation and demodulation. In order to activate this system, inductive model is used and in case of time variant parameter, telemetry sensor system which has got high rate in accuracy is implemented by using the forgetting factor.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.1
• /
• pp.20-26
• /
• 2015

It is very difficult to design an underwater communication system because of multipath, Doppler effects, noise, and attenuation. These factors lead to errors in the communication performance and maximum propagation distance. In this study, we calculate the distance that can be realized using the direct-sequence code division multiple access (DS-CDMA) technique with direct-sequence spread spectrum (DSSS) in an underwater communication system considering only the attenuation and noise. We also compare the estimated and calculated propagation distances obtained for several different scenarios.

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.175-182
• /
• 2004

When the M-ary signal experiences the Rayleigh fading, the diversity schemes can reduce the effect of fading since the probability that all the signals components will fade simultaneously is reduced considerably. The symbol error probabilities for various M-ary signals, such as MDPSK(M-ary DPSK) and MPSK(M-ary PSK), are mathematically derived for the Selection Combining 2(SC-2) and Selection Combining 3(SC-3) demodulation system which requires a less complex receiver than Maximum Ratio Combining(MRC). The propagation model used in this paper is the frequency-nonselective slow Rayleigh fading channel corrupted by the Additive White Gaussian Noise(AWGN). The numerical results presented in this paper are expected to provide information for the design of radio system using M-ary modulation method for above mentioned channel environment.