• The Journal of Internal Korean Medicine
• /
• v.27 no.1
• /
• pp.288-293
• /
• 2006

Background : Monoplegia is the paralysis of a limb. It is commonly caused by an injury to the cerebral cortex, and rarely caused by injury to the internal capsule, brain stem, or spinal cord. Most problems with cerebral cortex is derived from the occlusion of a brain cortex blood vessel due to thrombus or embolus. Objectives : This study is to see if there is a significance in thermal differences of acupoints in diagnosis and treatment of monoplegia on an upper extremity to test the validity of acupuncture and herbal treatment for it. Methods : By using Digital Infrared Thermographic Imaging(DITI), thermal differences$({\Delta}T)$ of acupoints on the upper extremity in a patient with monoplegia on the right upper extremity were measured after an attack of the disease. By giving Mangeum-tang(萬金湯) and treating the patient with acupuncture. the temperature changes of the upper extremity were examined through DITI and improvement was observed. Results : Compared with the left arm which suffered no such injury, the right recovered about 80% of sensation, and the grade of monoplegia improved from Grade O to Grade V. Also, the temperatures of right palmar-dorsal hand and the region of Weiguan(外關, Waiguan, TE5) were $1^{\circ}C$ and $1.45^{\circ}C$ higher than the same left region on admission day, but the thermal differences$({\Delta}T)$ narrowed to $0.5^{\circ}C$ by the last day. Conclusions : Results suggest that DITI screening is a reliable method of prognosis and that the time required for treatment can be estimated through this method in cases of monoplegia to an upper extremity. Also, progress in treatment is reflected in thermal differences of acupoints of the monoplegic upper extremity in accordance with the theory of meridian. This supports a role for acupuncture and herbal treatment for monoplegia.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.31-42
• /
• 2000

Consolidation and permeability are major engineering properties of soil. In clay, coefficient of permeability and consolidation can be calculated by incremental loading consolidation test. However, it is known that the incremental loading test has several deficiencies including long testing time, non-uniform stress state, very soft clay and problem of back pressure saturation. Specially, it is not performed with horizontal consolidation test. Several methods have been proposed for obtaining reliable values of $C_v$. Among these, the square root of time-fitting method proposed by Taylor(1948) and logarithm of time-fitting method, also called Casagrande's method, are used extensively in soil engineering practice. But these methods are not amenable for the absence of initial linear portion and have the difficulties involved in distinguishing secondary compression from primary compression. Rowecell consolidation tests were carried out in this study with different trimming axis and sample size. The results were compared with those of other methods; Casagrande,$Taylor,\; Casagrande,\; Hyperbolic,\; \delta/t-logt$. From the results, we explained a relationship between horizontal coefficient of permeability and void ratio was obtained. Finally, the directly measured horizontal coefficient of permeability obtained by using the Rowecell was compared with the permeability derived indirectly from the consolidation test result.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1471-1476
• /
• 2005

The optimization of ethanol treatment was carried out by response surface methodology (RSM) which was expressed through change of ${\Delta}$E value for improvement of color of dried large anchovy. The optimum condition was shown as treatment with 7 volumes (v/m) of ethanol at $50^{\circ}C$ for 9 hrs. At this condition, the removal rates of trimethylamine (TMA) and fat considered as fishy odor-causing materials were 81.1 and $77.4\%$, respectively, when analyzed by solid phase microextraction (SPME)/gas chromatography and soxhlet method, respectively The effect of citric acid on the removal rate of TMA was the highest one among organic acid treatments. The removal rate of TMA was affected greatly by the concentration of organic acid rather than the temperature and time of treatment. $73\%$ of TMA was removed by treatment of $1\%$ of citric acid at $20^{\circ}C$ for 20 min. Specially, above $90\%$ of TMA could be removed by the combination of alcohol and citric acid treatment. In vitro absorption rate of calcium was also increased to $12.3\%$ by the combination of alcohol and citric acid treatment compared with $2.9\%$ of control.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.209-219
• /
• 1993

Evaporated Al/Pd thin films were irradiated with various doses to produce intermetallic compounds. In order to study the first phase formation and phase sequence, RBS and TEM studies have been used. It was found that the initial phase formed by irradiation of $5{\times}10^{15}Ar^+/cm^2$ was $Al_3Pd_2$, while $1.5{\times}10^{16}Ar^+/cm^2$ gave the subsequent phase of AlPd. This phenomenon was analysed using effective heat of formation (${\Delta}$H') model. The experimental results agree with that predicted by effective heat of formation model. This model has been extended to predict the first phase formation and phase sequence by ion beam mixing in metal/Si systems as well as metal-metal systems.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.5
• /
• pp.590-603
• /
• 2006

Size-and time-resolved aerosol samples were collected using an eight-stage Davis rotating unit for monitoring (DRUM) sampler from 23 March to 29 April 2001 at Gosan, Jeju Island, Korea, which is one of the super sites of Asia-Pacific Regional Aerosol Characterization Experiment(ACE-Asia). These samples were analyzed using synchrotron X-ray fluorescence for 3-hr average concentrations of 19 elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb, and Pb. The size-resolved data sets were then analyzed using the positive matrix factorization(PMF) technique to identify possible sources and estimate their contributions to particulate matter mass. PMF analysis uses the uncertainty of the measured data to provide an optimal weighting. Twelve sources were resolved in eight size ranges($0.09{\sim}12{\mu}m$) and included continental soil, local soil, sea salt, biomass/biofuel burning, coal combustion, oil combustion, municipal incineration, nonferrous metal source, ferrous metal source, gasoline vehicle, diesel vehicle, and volcanic emission. The PMF result of size-resolved source contributions showed that natural sources represented by local soil, sea salt, continental soil, and volcanic emission contributed about 79% to the predicted primary particulate matter(PM) mass in the coarse size range ($1.15{\sim}12{\mu}m$) while anthropogenic sources such as coal combustion and biomass/biofuel burning contributed about 58% in the fine size range($0.56{\sim}2.5{\mu}m$). The diesel vehicle source contributed mostly in ultra-fine size range($0.09{\sim}0.56{\mu}m$) and was responsible for about 56% of the primary PM mass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.423-423
• /
• 2013

3~5 족 반도체 물질인 phosphorus 화합물 중 대표적인 InAlP 삼종화합물은 작은 굴절률, 큰 밴드갭, GaAs와 lattice 일치 때문에 큰 주목을 받고 있고, p-type high electron mobility transistors(p-HEMT), laser diodes 등의 고속 전자소자 및 광전 소자에 응용이 가능한 매우 중요한 물질이다. 최적의 소자 응용기술을 위해서는, 정확한 광물성 연구가 수행되어야 하지만 InxAl1-xP 화합물에 대한 유전율 함수 및 전자전이점 등의 연구는 미흡한 실정이다. 이에 본 연구에서는 1.5~6.0 eV 에너지 영역에서 각기 다른 In 조성비를 갖는 InxAl1-xP 화합물의 가유전율 함수 ${\varepsilon}={\varepsilon}_1+i{\varepsilon}_2$와 전자전이점 데이터를 보고한다. GaAs 기판 위에 molecular beam epitaxy (MBE)를 이용하여 InxAl1-xP (x=0.000, 0.186, 0.310, 0.475, 0.715, 0.831, 1.000) 박막을 성장하였고 타원편광분석기를 이용하여 유전율 함수를 측정하였다. 또한 실시간 화학적 에칭을 통하여 시료 표면에 자연산화막을 제거함으로써 순수한 InAlP의 유전율 함수를 측정할 수 있었고, 측정된 유전율 함수를 이차미분하여 In 조성비에 따른 전자전이점을 얻을 수 있었다. 얻어진 전자전이점 값을 이용하여 linear augmented Slater-type orbital method (LASTO) 를 통해 이론적 전자 밴드 구조 계산을 하였고, 이를 바탕으로 $E_0$, $E_1$, $E_2$ 전이점 지역의 여러 전자전이점($E_1$, $E_1+{\Delta}_1$, $E_0'$, $E_0'+{\Delta}_0'$, $E_2$, $E_2'$)의 특성을 정의할 수 있었고, $E_0'$과 $E_2$ 전이점의 에너지 값이 In 조성비가 증가함에 따라 서로 교차함을 발견할 수 있었다. 타원 편광 분석법을 이용한 유전율 함수 및 전자전이점 연구는 InAlP의 광학적 데이터베이스를 확보하는 성과와 더불어 새로운 디바이스 기술 및 광통신 산업에도 유용한 정보가 될 것이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.413-420
• /
• 2012

Purpose: The purpose of this setback genioplasty study is to develop a prediction method for the calculated osteotomy angle using horizontal and vertical changes as well as to evaluate the proportion of hard and soft tissue changes. Methods: Twelve patients who had received setback genioplasty with other maxillofacial surgery were examined. Three lateral cephalograms were taken just before surgery, immediately after surgery, and 3 months later surgery. A reference line was established to the reference point of the inner most point of the lingual symphysis cortex, incisor tip, and 2nd molar cusp tip. Measuring was conducted from pogonion (Pg), menton (Me), labrale inferius (Li), Mentolabial fold, soft tissue pogonion (Pg'), and soft tissue menton (Me') to the reference lines. Results: In setback genioplasty, the skeletal Pg moved posteriorly 5.07 mm. The ratios of soft tissue to hard tissue movement were 36% posteriorly and 62% inferiorly at Pg', 67% posteriorly and 104% inferiorly at Me', and 34% anteriorly and 164% posteriorly at Li. In reduction & setback genioplasty, skeletal Pg moved posteriorly 4.63 mm and skeletal Me moved superiorly 3.63 mm. The ratios of soft tissue to hard tissue movement were 76% posteriorly and 18% superiorly at Pg', 68% posteriorly and 42% superiorly at Me', and 44% anteriorly, 124% posteriorly at Li. The calculated mean slope angle, based on ${\Delta}H/{\Delta}V$ ratio, was 61.25 and the measured mean slope angle was 60.17. Thus, the calculated and measured slope angles have a similarity. Conclusion: In setback genioplasty, soft tissue moves posteriorly and inferiorly. In particular, at the Me' and Pg', the inferior movement of the soft tissue is greater than the posterior movement. Also, the predictable results (measured slope angle) after operation can be achieved by the calculated slope angle. Thus, the relationship of soft and hard tissue changes must be considered as the results are predictable.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.318-322
• /
• 1988

We studied the aquation reaction of s-cis-$[Co(eee)Cl_2]^+$ and s-cis-$[Co(eee)Br_2]^+$ complex ions under the various temperatures and pressures. In these complexes eee is $NH_2-CH_2CH_2-S-CH_2CH_2-NH_2$. The rate law of the aquation reactions of these two complexes obeys $Rate = k_{obsd}$[CO(III)], where rate constants of s-cis-$Co(eee)Cl_2]^+$ and s-cis-$[Co(eee)Br_2]^+$ respectively are $0.687{\times}10^{-4}$ $sec^{-1}$ and $4.10{\times}10^{-4}$ $sec^{-1}$ in condition of 0.1M $HClO_4\;and\;40^{\circ}C$. In the same condition, the activation entropies of s-cis-[Co(eee)$Cl_2$]+ and s-cis-(Co(eee)Br_2$]+ complexes respectively are -15.5 eu and -7.54eu, and the activation volumes are $-4.6cm^3mole^{-1}$ and $-4.2cm^3mole^{-1}$. From these data, we could infer the mechanism of the aquation reaction as the interchange dissociation (Id) mechanism.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.41-41
• /
• 2007

For use in spintronic materials, dilute magnetic semiconductors (DMS) are under consideration as spin injectors for spintronic devices[l]. $TiO_2$-based DMS doped by a cobalt, iron, and manganese et al. was recently reported to show ferromagnetic properties, even at temperatures above 300K and the magnetic ordering was explained in terms of carrier-induced ferromagnetism, as observed for a III-V based DMS. An anomalous Hall effect (AHE) and co-occurance of superparamagnetism in reduced Co-doped rutile $TiO_{2-\delta}$ films have also been reported[2]. Metal segregation in the reduced metal-doped rutile $TiO_2-\delta$ films still remains as problems to solve the intrinsic DMS properties. Superlattice films have been proposed to get dilute magnetic semiconductor (DMS) with intrinsicroom-temperature ferromagnetism. For a $TiO_2$-based DMS superlattice structure, each layer was alternately doped by two different transition metals (Fe and Mn) and deposited to a thickness of approximately $2.7\;{\AA}$ on r-$Al_2O_3$(1102) substrates by pulsed laser deposition. The r-$Al_2O_3$(1102) substrates with atomic steps and terrace surface were obtained by thermal annealing. Samples of $Ti_{0.94}Fe_{0.06}O_2$(TiFeO), $Ti_{0.94}Mn_{0.06}O_2$(TiMnO), and $Ti_{0.94}(Fe_{0.03}Mn_{0.03})O_2$ show a low remanent magnetization and coercive field, as well as superparamagnetic features at room temperature. On the other hand, superlattice films (TiFeO/TiMnO) show a high remanent magnetization and coercive field. An anomalous Hall effect in superlattice films exhibits hysisteresis loops with coercivities corresponding to those in the ferromagnetic Hysteresis loops. The superlattice films composed of alternating layers of $Ti_{0.94}Fe_{0.06}O_2$ and $Ti_{0.94}Mn_{0.06}O_2$ exhibit intrinsic ferromagnetic properties for dilute magnetic semiconductor applications.

• Ceramist
• /
• v.21 no.4
• /
• pp.378-387
• /
• 2018

The optimal fabrication conditions for $Gd_{0.1}Ce_{0.9}O_{2-{\delta}}$(GDC) buffer layer and $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LSCF) cathode on 1mol% $CeO_2-10mol%\;Sc_2O_3$ stabilized $ZrO_2$ (CeScSZ) electrolyte were investigated for application of IT-SOFCs. GDC buffer layer was used in order to prevent undesired chemical reactions between LSCF and CeScSZ. These experiments were carried out with $5{\times}5cm^2$ anode supported unit cells to investigate the tendencies of electrochemical performance, Microstructure development and interface reaction between LSCF/GDC/CeScSZ along with the variations of GDC buffer layer thickness, sintering temperatures of GDC and LSCF were checked, respectively. Electrochemical performance was analyzed by DC current-voltage measurement and AC impedance spectroscopy. Microstructure and interface reaction were investigated by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Although the interfacial reaction between these materials could not be perfectly inhibited, We found that the cell, in which $6{\mu}m$ GDC interlayer sintered at $1200^{\circ}C$ and LSCF sintered at $1000^{\circ}C$ were applied, showed good interfacial adhesions and effective suppression of Sr, thereby resulting in fairly good performance with power density of $0.71W/cm^2$ at $800^{\circ}C$ and 0.7V.