• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.93-98
• /
• 2000

Unpredictable failures can occur due to the DHC (delayed hydride cracking) or the degradation of fracture toughness by hydride embrittlement in CANDU pressure tube which can result from the absorption of hydrogen or deuterium in the high temperature coolant. To investigate the hydride embrittlement of CANDU Zr-2.5Nb pressure tube, the transverse tensile test and the fracture toughness test were performed from room temperature to $300^{\circ}C$ using three different specimens which have an AR (As Received), 100, and 200 ppm hydrogen. As the amount of absorbed hydrogen was increased, the transverse yield strength and the ultimate tensile strength were also increased. In addition, as the test temperature became higher they were decreased linearly. While, at room temperature, the hydrogenbsorbed specimens represented the embrittlement which resulted in sudden decreasing of fracture toughness, the fracture characteristics became ductile such as AR specimen at high temperatures. Through the observation of fracture surface using SEM, it was found that the stress state of mixed mode could be related to the fissure which was believed to decrease the global fracture toughness.

• Archives of Plastic Surgery
• /
• v.47 no.4
• /
• pp.297-300
• /
• 2020

Hyaluronidase, an enzyme that breaks down hyaluronic acid, has long been used to increase the absorption of drugs into tissue and to reduce tissue damage in cases of extravasation of a drug. With the increasing popularity of hyaluronic acid filler, hyaluronidase has become an essential drug for the correction of complications and unsatisfactory results after filler injection. For this reason, when performing procedures using hyaluronic acid filler, a sufficient knowledge of hyaluronidase is required. In order for hyaluronidase to dissolve a hyaluronic acid filler, it must interact with its binding sites within the hyaluronic acid. The reaction of a filler to hyaluronidase depends on the hyaluronic acid concentration, the number of crosslinks, and the form of the filler. Hyaluronidase is rapidly degraded and deactivated in the body. Therefore, in order to dissolve a hyaluronic acid filler, a sufficient amount of hyaluronidase must be injected close to the filler. If the filler is placed subcutaneously, injection of hyaluronidase into the filler itself may help, but if the filler is placed within a blood vessel, it is sufficient to inject hyaluronidase in the vicinity of the vessel, instead of into the filler itself. Allergic reactions are a common side effect of hyaluronidase. Most allergic reactions to hyaluronidase are local, but systemic reactions may occur in infrequent cases. Since most allergic responses to hyaluronidase are immediate hypersensitivity reactions, skin tests are recommended before use. However, some patients experience delayed allergic reactions, which skin tests may not predict.

• Journal of Korean Society on Water Environment
• /
• v.31 no.3
• /
• pp.253-261
• /
• 2015

The purpose of this study is the efficient biological treatment of highly concentrated nitrate nitrogen by calcium ion control present within the pickling wastewater. In laboratory scale's experiments research was performed using a sequencing batch reactor and the evaluation of denitrification reaction in accordance with the injection condition of calcium ions, the surface properties of microorganisms, and the evaluation of sludge precipitability were performed. Results of the study showed that the denitrification reaction was delayed when injecting more than 600 mg/L of the calcium ion within the denitrification process. In addition, we observed the absorption form of calcium ions absorbed on the surface of microorganisms following an increase in the calcium ion dose. It was found that as the calcium ion dose increased the sludge precipitability also increased continuously and it is judged that a smooth denitrification induction is possible when treating the nitrate nitrogen by the calcium ion control of pickling waste water and the shortening of precipitation time enables a liquid operation to increase the reaction time.

• Korean journal of food and cookery science
• /
• v.19 no.1
• /
• pp.107-113
• /
• 2003

In a previous study, a dietary supplement was developed in our lab using natural herbal extracts against digest enzyme activity in GI tract for weight control. This natural herbal extracts could regulate absorption of glucose and lipid by the inhibition of digest enzyme activity. In this study, we screened the natural herbs that inhibit glucoamylase activity and developed an water extract of cinnamon. The cinnamon extract delayed and decreased the increment of carbohydrate degradation through the inhibition of glucoamylase activity in vitro. Fifty volunteers were subjected to the intake of the herbal extracts by taking twice a day for 60 days. As a result, the treated subjects lost 3 kg of body weight and 3.5 kg of body fat mass after the treatment. Furthermore, the body mass index and waist size were significantly decreased during the experimental period. Above results suggested that the administration of the dietary additives composed of cinnamon and natural herbal extract improves the obesity by the decrement of body weight and body fat mass.

• Archives of Pharmacal Research
• /
• v.28 no.8
• /
• pp.977-982
• /
• 2005

The aim of this study was to compare two formulations of film-coated pellets containing c1arithromycin after single oral dose study in healthy male volunteers. Two formulations with different coating polymers were prepared: formulation-1 (F-1) was prepared by incorporating three kinds of pH-dependent gradient-release coated pellets into capsules and formulation-2 (F-2) was prepared by coated with an insoluble semiosmotic film. Release profiles of filmcoated pellets were evaluated using paddle method under different conditions. Pharmacokinetic profiles of these formulations were obtained in three healthy male volunteers and compared to commercially available immediate release (IR) tablets. The relative bioavailability based on the $AUC_{0-24h}$ was found to be $96.2\%\;and\;58.7\%$ for F-1 and F-2 compared with IR, and the $T_{max}$ was delayed.

• Earthquakes and Structures
• /
• v.21 no.5
• /
• pp.445-460
• /
• 2021

This study experimentally explored the behaviour of 12 concrete filled steel tube (CFST) and steel tube columns subjected to lateral cyclic loading. The L/D ratio was 12.3 while D/t ratios were 45.4, 37.8 and 32.4, classifying these 12 specimens into 3 groups. Each group included 3 CFST and 1 steel tube columns and were tested to failure. The experimental results indicated that CFST specimens reached the state of 'collapse prevention' (drift 4%) prior to the occurrence of local buckling. Strength degradation of CFST specimens did not occur up to the failure by buckling. This showed the favourable characteristic of CFST columns in preventing collapse of structures subjected to earthquakes. The high energy absorption capability in the post collapse limit state was appropriate for dissipating energy in structures. Compared to steel tube columns, CFST columns delayed local buckling and prevented inward buckling. Consequently, CFST columns exhibited their outstanding seismic performance in terms of the increased ultimate resistance, capacity to sustain 2-3 additional load cycles and significantly higher drift. A simple and reasonably accurate model was proposed to predict the ultimate strength of CFST columns under lateral cyclic loading.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.3
• /
• pp.171-178
• /
• 2003

Drug interactions with food, on occasion, lead to serious nutritional and functional changes in the body as well as alterations of pharmacological effect. It, therefore, should be necessary to take drug interactions with food into consideration for effective and safe therapeutics. Diabetes mellitus is a heterogeneous group of disorders characterzed by abnormal glucose homeostasis, resulting in hyperglycemia, and is associated with increased risk of microvascular, macrovascular, and neuropathic complications. However, the precise mechanism of diabetes mellitus remains unclear. Three basic objectives in the care of diabetic patients are maintaining optimal nutrition, avoiding hypo- or hyperglycemia and preventing complications. Laminaria japonica is a brown macroalgae which can be used as a functional diet due to high content of diatery fiber. The purpose of this study was to investigate the effect of Laminaria japonica diet on the pharmacokinetics of metformin which are frequently used in the treatment of diabetes. Diabetic rats induced by streptozotocin were employed in this study. Blood concentrations of oral hypoglycemic agent, metformin, were measured by HPLC and resultant pharmacokinetic parameters were calculated by RSTRIP. The mechanisms of drug interaction with food were evaluated on the basis of pharmacokinetic parameters such as $k_{a},\;t_{1/2},\;C_{max},\;t_{max}$, and AUC. Administration of metformin in normal and diabetic rats treated with Laminaria japonica diet showed significant decrease in AUC, $C_{max},\;and\;k_a$, and increase in $t_{max}$, compared to those with normal diet. This might result from adsortion of metformin on components of Laminaria japonica, causing delayed absorption. The oral glucose test showed that Laminaria japonica diet could lower blood glucose level probably through either inhibiting the activity of disaccharidases, intestinal digestive enzymes, or delaying the absorption of glucose. More studies should be followed to fully understand pharmacokinetic changes of metformin caused by long-term Laminaria japonica diet.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.5
• /
• pp.677-684
• /
• 1998

The distribution and elimination of oxolinic acid (OA) following oral (80mg/kg body weight) and bath (20 mg/$\ell$) treatment were examined in the organs and plasma of Nile tilapia (Oreochromis niloticus) on different temperatures and physiological conditions using a bioassay method. On the analysis of temperature effect, both absorption and elimination of OA after oral administration were delayed in the group at $15^{\circ}C$. but significant difference of the peak concentrations in the tissues of the groups at $15^{\circ}C$ and $25^{\circ}C$ was not revealed. However, the changes of maximam concentration, absorption and elimination rates in the tissues of fish following bath treatment depending on different temperatures were more significantly different from the results of the studies with oral administration. The pharmacokinetics of OA in the tissues of diseased fish, the main target of drug treatment, also appeared to be distinguishable from those of healthy fish.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.42-49
• /
• 2020

This paper is a basic study to improve durability by imparting hydrophobicity to the surface and sphere of cement-based materials. A cement mortar to which a silane/siloxane-based mixed water repellent was added was prepared, and its initial hydration performance, flow performance, and compressive strength were measured. In addition, after the surface was abraded, the water contact angle and water absorption were measured. The flow of cement mortar to which the water repellent was added was found to decrease up to 1.5% in the addition amount of the water repellent agent, and increased at 3.0% in the addition amount. It was found that the setting time of the cement paste was delayed in both the initial setting and the termination when the water repellent was added. It was found that the compressive strength decreased from 3.0% of the maximum added amount of the water repellent to a maximum of 30%. The contact angle was found to increase when the water repellent was added to the cement mortar, and the contact angle after surface polishing was found to be larger than before surface polishing. The addition of the water repellent showed hydrophobicity not only on the surface but also on the surface and cross section damaged by polishing. The water absorption rate was found to decrease when the water repellent was added to the cement mortar, and the water absorption rate after surface polishing was found to be greater than before surface polishing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1677-1685
• /
• 2014

Short discrete fibers compounded with concrete can enhance the tensile resistance and ductility of concrete. Recently, the effectiveness of the reinforcement has increased according to the increasing length of steel fiber. However, the lengthening of steel fiber requires reducing the ratio of the fiber content to remain the workability and quality of concrete. Thus, the present study evaluated the flexural performance of fiber reinforced concrete with less than l.0% fiber volume ratios of steel fiber, 30mm and 60mm long, and polypropylene fiber, being evaluated as a good reinforcing material with chemical stability, long-term durability, and cost effectiveness. Concrete with more than 0.25% steel and 0.5% polypropylene fibers improved the brittle failure of concrete after reaching cracking strength. Concrete reinforced with polypropylene exhibited deflection-softening behavior, but that with more than 0.5% polypropylene delayed stress reduction and recovered flexural strength by 60 to 80% after cracking strength. In conclusion, concrete reinforced with more than 0.75% polypropylene could improve structural flexural performance. In particular, energy absorption capacity of reinforced concrete with 1.0% polypropylene fiber was similar to that with 0.5% and 0.7% steel fibers.