• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1549-1556
• /
• 2011

In this paper, we give an estimate on the difference between $x^n(t)$ and x(t) and it clearly shows that one can use the Picard iteration procedure to the approximate solutions to stochastic functional differential equations with infinite delay at phase space BC(($-{\infty}$, 0] : $R^d$) which denotes the family of bounded continuous $R^d$-valued functions ${\varphi}$ defined on ($-{\infty}$, 0] with norm ${\parallel}{\varphi}{\parallel}={\sup}_{-{\infty}<{\theta}{\leq}0}{\mid}{\varphi}({\theta}){\mid}$ under non-Lipschitz condition being considered as a special case and a weakened linear growth condition.

• Journal of Power Electronics
• /
• v.9 no.5
• /
• pp.718-725
• /
• 2009

To get instantaneous reference data in a single power system with vector space phasors, the instantaneous load current is adopted as a phase and another new signal, which is delayed through filtering by the phase-delay property of a low-pass filter, is used as the secondary phase. Because the two-phases have a different phase, the instantaneous value of the harmonic current can be obtained without a time-delay in calculation. The reference voltage is created by multiplying the coefficient k by the compensation current using the rotating reference frame synchronized with the source-frequency. To verify the validity of the proposed control method, experiments are carried out on a prototype of the single-phase hybrid active power filter system.

• Journal of the Korean Mathematical Society
• /
• v.38 no.1
• /
• pp.177-191
• /
• 2001

We consider a linear differential game described by the delay-differential equation in a Hilbert space H; (※Equations, See Full-text) U and V are Hilbert spaces, and B(t) and C(t) are families of bounded operators on U and V to H, respectively. A(sub)0 generates an analytic semigroup T(t) = e(sup)tA(sub)0 in H. The control variables g, and u and v are supposed to be restricted in the norm bounded sets (※Equations, See Full-text). For given x(sup)0 ∈ H and a given time t > 0, we study $\xi$-approximate controllability to determine x($.$) for a given g and v($.$) such that the corresponding solution x(t) satisfies ∥x(t) - x(sup)0∥ $\leq$ $\xi$($\xi$ > 0 : a given error).

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.4
• /
• pp.813-838
• /
• 2011

In this paper, we prove sufficient conditions for controllability of second order semi-linear neutral impulsive differential inclusions on unbounded domain with infinite delay in Banach spaces using the theory of strongly continuous Cosine families. We shall rely on a fixed point theorem due to Ma for multi-valued maps. The controllability results in infinite dimensional space has been proved without compactness on the family of Cosine operators.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.6
• /
• pp.53-61
• /
• 1990

Real-time implementations of the active adaptive noise controller are proposed and tested. There are three problems in active noise control such as real-time processing, an acoustic feedback of secondary signal and a time-delay of control system elements. For real-time processing, the DSP56001 was used. To avoid acoustic feedback, the secondary signal was excluded from prediction. And for compensation of time delay, the ahead prediction was applied. As the primary noise is reflected in space, the reflected noise should be controlled for perfect noise control. But in this case, the controller might be unstable. For solving the problem, it is proposed that the source noise and the reflected noise are predicted separately. Some experimental results show the stability and effectiveness of the proposed controller.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.263-271
• /
• 2001

Blast-vibration tests were carried out to determine the effects of the number of free face on the level of blast vibration. Frequency chatacteristics were also examined by using FFT analysis. To check the effects of the number of free face, charge weight per delay, drilling length, burden and space were applied uniformly and the number of free face was only changed from one to four. The results from tests were checked by regression analysis and K-value.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.314-317
• /
• 2003

In this paper, a measurement and analysis program is developed, that can be utilized to measure and analyze radio propagation characteristics. This program is able to control the measurement instruments including spectrum analyzer through a GPIB interface, and analyze the measured data to yield mean excess delay and RMS delay spread. The measured path loss can be compared with theoretical path loss in free space or inside tunnels. The measured and analyzed results can also be presented in the forms of graphs. As those tasks can be conducted on the measurement spot, this program is very helpful for performing and verifying measurements.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.649-657
• /
• 2013

DTN flooding based routing protocol replicate the message copy to increase the delivery like hood that overloads the network resources. The probabilistic routing protocols reduce replication cost by forwarding the message to a node that holds high predictability value to meet its destination. However, the network traffic converges to high probable nodes and produce congestion that triggers the drop of previously stored messages. In this paper, we have proposed a routing protocol called as Connection frequency Buffer Aware Routing Protocol (CFBARP) that uses an adaptive method to maintain the information about the available buffer space at the receiver before message transmission. Furthermore, a frequency based method has been employed to determine the connection recurrence among nodes. The proposed strategy has performed well in terms of reducing message drop, message relay while increases the delivery probability.

• Tunnel and Underground Space
• /
• v.5 no.2
• /
• pp.89-94
• /
• 1995

Regression analysis and a comparative study were carried out for 52 blast vibration data which were monitored by changing the monitoring distance and charge per delay. The results are as follows: 1) The square and cube root scalings and general equation which have a confidence level at the point of 90% and 99% are V90=33300(SD)-2.026 , V90=23600(SD)-1.993, V90=26300W0.755 R-2.007 and V99=48400(SD)-2.026, V99=34000(SD)-1.993 , V99=38100W0.755R-2.007, respectively. 2) There is need to decide the allowable max. charge weight per delay considering the cross points comparatively of the nomogram constructed using several predictived equations. 3) It is necessary to derive the predictive equation on the basis of blast vibration level monitored in field and to decide safe vibration level and the confidence level.

• Tunnel and Underground Space
• /
• v.4 no.1
• /
• pp.38-46
• /
• 1994

This paper concerns the design of blasts adjacent to structures and facilities. In order to investigate the site characteristics, measurements of in-situ wave propagation and laboratory tests of rock cores taken from the boreholes were carried out. Effects of rock media and delay intervals on ground vibration levels were identified from over sixty measurements of three times of test blasts. For practical use in the field, an empirical propagation equation was derived so as to reflect the characteristics of rock media and delay effects. Safe limits of vibration level for structures were conservatively established based on various suggested criteria. Safe limits for facilities were adopted so that vibration levels induced by blasting should not exceed the allowable limits specified in the manufacturer's installation condition. Suggested were blast pattern and operation to enhance the rock fracturing and to reduce the ground vibration levels under the restricted conditions.